LEXON LD141 City Wireless Charging Station and Bluetooth Speaker User Manual
- October 27, 2023
- LEXON
Table of Contents
LEXON LD141 City Wireless Charging Station and Bluetooth Speaker
- Speaker
- Microphone
- Multi-Function Button (MFB button)
- USB type-C port
- Wireless Charging light indicator
- Bluetooth light indicator
CHARGING
Connect the USB Type-C cable to a Quick Charge 3.0 certified USB power Adapter
then plug it to the wall socket (4). When the device is powered, a blue LED
will light up on the side next to the connector.
Important note: To get your Lexan’s device properly operating, you need
to use a Quick Charge 3.0 certified charger or a DC 9V/2A or DC 5V/2A Power
Supply Adapter. Using a different charger or adapter with lower specification
than mentioned above, will significantly affect the wireless charging
performance, the audio quality and may cause irreversible damages to your
device.
PAIRING/ CONNECTING
Bluetooth pairing
- Long press the “MFB” button to enter in pairing mode.
- To notify you the speaker is in pairing mode, it will emit a sound and the Blue light indicator will start flashing quickly.
- Go in the Bluetooth” settings of your smartphone and ensure your Bluetooth” is switched on.
- Scroll to Other or new Devices and look for your new Bluetooth speaker’s LEXON CITY ENERGY.
- Once it appears, tap it to connect. Your speaker will emit a confirmation sound as soon as it is paired.
Note: Once paired and connected, the Bluetooth” speaker will be automatically connected to the device whenever you turn the speaker on again, provided the device is in range.
Light status indicator
If the indicator light does not Work as described above, unplug the charger from the wireless charger and reconnect it.
Bluetooth Hands-Free Operations
Answer a call: Press the “MFB” button once.
End a calI: Press the “MFB button once.
Reject a call: Press and hold the “MEB button for 2 seconds.
Re-dialing: Under standby mode, short press the “MFB” button twice for
last number dialing9. While BT speaker is in use, press “MFB” button to stop
playing, and press again to continue playing.
How to pair with another phone
To pair your speaker with another phone, please disconnect or forget LEXON
CITY ENERGY from your smartphone’s Bluetooth” settings first. Then, perform a
new pairing procedure with another smartphone.
WIRELESS CHARGING
Charging Mobile Device
- Make sure to place a supported mobile device on the wireless charging surface. Check the charging icon displayed on the mobile s phone screen for charging status.
- When the mobile device is fully charged, make sure to remove the mobile device from the wireless charger surface.
Note: Position the smartphone in the appropriate wireless charging surface to ensure that the device is properly charged.
Light Status indicator
If the indicator light does not orc as described above, unplug the charger from the wireless charger and reconnect it.
SAFETY PRECAUTIONS
Read all the instructions before using the device:
- Protect the speaker from near heat sources such as radiators, heaters, air ducts, sunlight.
- Wireless charging may not work properly if you have attached a too thick case to your mobile phone. f your phone case is thick, remove it before placing your mobile device on the wireless charger.
- Wireless charging Is slower than wired charging because of energy lost through the induction process.
- Avoid contact with liquids: keep away rom water and high moisture conditions.
- No hitting the product severely, or insert any conductive objects into the speaker, or charging port during usage.
- Do not put metal objects or magnets between the mobile device and the Wireless charger surface.
- Do not repair the speaker by yourself, seek for professional service.
- Avoid getting shocked, do not touch product with wet hands.
PRODUCT SPECIFICATIONS:
- Material: Aluminum/ silicone /ABS
- Net Weight: 209 gr
- Speaker diameter: Ø40 mm
- Wireless surface: 79 x 143 x 37 mm
Bluetooth:
- Bluetooth version: 4.2
- Power Supplier: DC 5V
- Rated Power: 3 W
- Signal& noise ratio: 2 80db
- Frequency: 180Hz-15KHz
- Impedance: 403W
- Speaker Unit: 1 pcs
Wireless charge:
- Use: Mobile Phone supporting wireless charging
- Transmit lower: 10WI7.5W/5W
- Input: DC 9V/2A or 5V/2A
- Output: 5V/1A or 9V/1.1A
- Transmission distance: 3-6mm
- Working Frequency: 110-205Khz
- Coil: Dual Coil
- Port: USB Type C
EUROPEAN UNION CE DIRECTIVE LEXON
hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the RE Directives 2014/53/EU.
The original declaration of conformity may be found at: https://www.lexon-
design.com/assets/certifications-ce-cityenergy.pdf
DISPOSAL AND RECYCLING INFORMATION
After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies: electrical and electronic devices may not be dis-posed of with domestic waste. Consumers are obliged by law to return electrical and electronic device at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting Our environment.
USA – FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
RF exposure statements
This equipment complies with FCC radiation exposure requirement set forth for
an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance.
CANADA- ISED STATEMENT
This device complies with Industry Canada license-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.
This device complies with the IsED RSS-102 RF exposure requirement set forth for an uncontrolled environment and are safe for intended operation as described in this manual. Cet appareil est conforme aux exigences d’exposition RF de l’SED RSS-102 définies pour un environnement non contrôlé et est súr pour le fonctionnement prévu comme décrit dans ce manuel.