LEXON LD147 Duo Mini Charger dual slim wireless charger User Manual
- October 27, 2023
- LEXON
Table of Contents
LD147 Duo Mini Charger
dual slim wireless charger
User Manual
Design by Manuela Simonelli & Andrea Quaglio
PRODUCT OVERVIEW
- Built-in USB-A cable (1,2m 147,2)
- 2x Wireless charging surface (5W each)
- 2x LEDs indicator (charging status)
FEATURES
- Charge up to two 01 enabled smartphones and devices by simply setting them down.
- Advanced Cri wireless charging solution enables you to charge your device without plugging in a cable
- The Duo Mini Charger is 01 certified meaning any Ci compatible devices can charge on it.
COMPATIBILITY
Works with all Qi v1.2 and newer devices.
This includes iPhone 8 Plus and newer versions, all Qi certified android
phones and most Qi-enabled devices such as Lexon products (Mino+, Mina M, Mina
L and more).
GET STARTED
Charging your Qi-enabled device
Caution : Make sure to plug the USB plug into a Quick Charge 3.0
Certified USB power adaptor or any power adaptor that delivers 10W or more.
Using a different power adaptor with lower specification than mentioned above,
will significantly affect the wireless charging performance and may cause
irreversible damage to your device.
- Connect the cable end into a quick charge 3.0 Certified USB power adaptor or any power adaptor that delivers 10W or more.
- Place the Qi-supported smartphone or device on wireless charging surface.
- Make sure the device is successfully charged. Then, remove the device once charging is completed.
| STATUS | LED |
|---|---|
| Power supply | Green light flashes three times and then turns off |
| Standby mode | Light Off |
| Charging | Green light flashes 15 seconds and then turns Off |
| Foreign object detected | Red light flashes |
Note : If the mobile device does not charge, ensure that the wireless charger is powered on and that the device is correctly positioned on the wireless charging surface. Make sure there is no metal or other foreign object between the device and the wireless charger. Then reposition the device again.
SAFETY PRECAUTIONS
Please read this important safety information before you use the device. It contains general safety information for devices and may include content that does not apply to your device. Follow the warning and caution information to prevent injury to yourself or others and to prevent damage to your device.
- Make sure to plug the USB plug into a QC 3.0 certified USB power adaptor or any power adaptor that delivers 10W or more.
- Do not touch the device, power cord or the electric socket with wet hands or other wet body parts
- Do not bend or damage the power cord
- Use manufacturer-approved chargers and supplies
- Do not drop or cause an impact to the charger or the device
- Protect the device, battery and charger from damage
- Do not store your device near or in heaters, microwaves, hot cooking equipment, or high-pressure containers
- Do not attempt to service, repair or disassemble the device by yourself.
- Do not put metal objects or magnets between the mobile phone and the wireless charger surface.
PRODUCT SPECIFICATIONS
Support : Qi enabled mobile devices
Material : ABS, Zinc Alloy & Silicone
Net Weight: 165 gr / 0.36 lb
Dimension : 14.0 x 6.8 x 0.85 cm / 5.51 x 2.67 x 0.33″ Frequency band:
110-205KHz
Input port: 5V-3A Wireless charging output: 2x 5W
Wireless Charging : Qi-certified
Transmission distance: 2mm-6mm / 0.07-0.23″
USB cord length: 1.2m / 47,2″
Operating temperature: 0° C-35° C / 32°F — 95°F
International warranty: 1 year
EUROPEAN UNION
CE DIRECTIVE
LEXON hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of Directives 2014/53/EU &
2011/65/EU.
The original EU declaration of conformity may be found at: https://www.lexon-
design.com/assets/certifications-ce-duominicharger pdf
UK Conformity Assessed
The object of the declaration described above is in conformity with the
relevant Union harmonisation legislation.
The original UK declaration of conformity may be found at: https://www.lexon-
design.com/assets/certifications-ukca-duominichargerpdf
DISPOSAL AND RECYCLING INFORMATION
After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies : electrical and electronic devices may not be dis-posed of with domestic waste. Consumers are obliged by law to return electrical and electronic device at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.
USA – FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Notice: Any changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
RF exposure statements
This equipment complies with FCC radiation exposure requirement set forth for
an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance.
CANADIAN COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
RF exposure statements
This device complies with the ISED RSS-102 RF exposure requirement set forth
for an uncontrolled environment and are safe for intended operation as
described in this manual. Cet appareil est conforme aux exigences d’exposition
RF de l’ISED RSS-102 definies pour un environnement non contreile et est sOr
pour le fonctionnement prevu comme decrit dans ce manuel.
125, Avenue des Champs-Elysées – 75008 Paris – FRANCE
All brands or product names are or may be trademarks or their respective
owners.
Pictures and specifications are not contractual. Assembled in China.
Iexon-design.com
Documents / Resources
|
LEXON LD147 Duo Mini Charger dual slim wireless
charger
[pdf] User Manual
LD147 Duo Mini Charger dual slim wireless charger, LD147 Duo, Mini Charger
dual slim wireless charger, dual slim wireless charger, wireless charger,
charger
---|---