Nikon NIKKOR Z DX 16-50mm f/3.5-6.3 VR Lens User Manual

Nikon NIKKOR Z DX 16-50mm f/3.5-6.3 VR Lens

Before using this product, please read these instructions carefully. You will also need to consult the camera manual.

• This lens is intended exclusively for use with mirrorless cameras featuring a Nikon Z mount.
• Update to the latest version of the camera firmware before using this lens with the Z 7 or Z 6, as otherwise, the camera may fail to correctly recognize the lens, and features such as vibration reduction may be unavailable. The latest firmware is available from the Nikon Download Center.

For Your our Safety

To prevent damage to property or injury to yourself or to others, read “For Your Safety” in its entirety before using this product. Keep these safety instructions where all those who use this product will read them.

WARNING: Failure to observe the precautions marked with this icon could result in death or severe injury.
CAUTION : Failure to observe the precautions marked with this icon could result in injury or property damage.

WARNING

• Do not disassemble or modify this pro not disassemble or modify this producoductt.. Do not touch internal paternal parts that that best become some exposed as the resultset of a fall or other of a fall or other accidencidentt.. Failure to observe these precautions could result in electric shock or another injury.
• Should you notice ane any abnormalities such as the pry abnormalities such as the producoduct prt producing during smokes head, heat, or unusual odors, or unusual odors, immediate, immediately discretely disconneconnect the ct the cameraman power sourer source..Continued operation could result in fire, burns or another injury.
• keep dreep dry.. Do not handle with wet handset hands.. Failure to observe these precautions could result in fire or electric shock.
• Do not use this pro not use this producoduct in the prt in the presentence of flammable dust ore of flammable dust or gas such as propane pan, gasoline or aer, gasoline or aerosolsosols.. Failure to observe this precaution could result in an explosion or fire.
• Do not dirty not directly variety view the sun or other bright the sun or other bright light source through the enough the lens.. Failure to observe this precaution could result in visual impairment.
• keep this prep this producoduct out of rt out of reach of children of children. en. Failure to observe this precaution could result in injury or product malfunction. In addition, note that small parts constitute a choking hazard. Should a child swallow any part of this product, seek immediate medical attention.
• Do not handle with barDo not handle with bare hands in loce hands in locations options exposed too extremely high or lovely high or low tw Temperature Failure to observe this precaution could result in burns or frostbite.

CAUTION

• Do not leave the lens point the lens pointed and at the sun or other start the sun or other strong lighting light soursourcceses.. Light focused by the lens could cause fire or damage to the product’s internal parts. When shooting backlit subjects, keep the sun well out of the frame.
• Do not lealeavve e the prproducoduct t where e it will be exposed Xposed to o eexxtrtremely emely high thigh temperemperaaturtureses, f, for an extended period such as in amended period such as in an enclosed but enclosed automobile or in dormobile or in direct sunlight.. Failure to observe this precaution could result in fire or product malfunction.
• Do not trtransporansport t camera eras as or lenses with tripods or similar similar accessories attachedttached.. Failure to observe this precaution could result in injury or product malfunction.

Notices for  Customers in the U.S.A..S.A.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

 FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.

CAUTION
Modifications
The FCC requires the user to be notified that any changes or modifi-cations made to this device that are not expressly approved by Nikon Corporation may void the user’s authority to operate the equipment.

Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A. Tel.: 631-547-4200

Notice for Customers in Canada
CAN ICES-3 B / NMB-3 B

Using the Lensen

Parts of the Lots of the Lens: Names and Fens: Names and Function
See below for the names and functions of the parts of the lens.

q Lens hood*

| Lens hoods block stray light that

would otherwise cause flare or ghosting. They also serve to protect the lens.

| See C

( 0 10)

---|---|---
w Zoom ring| Rotate to zoom in or out. Be sure to extend the lens before use.| See B

( 0 9)

e Focal length scale| Determine the approximate focal

length when zooming the lens in or out.

|

—

r Focal length mark

t Control ring

| Autofocus mode selected :

In autofocus mode, rotate the ring to adjust a setting such as [Focus (M/A)] or [Aperture] assigned using the camera. For more information, see the description of [Custom control assign- ment] /[Custom controls (shooting)] in the camera manual.

|

—

Manual focus mode selected :

Rotate the ring to focus.

y Lens mounting mark| Use when mounting the lens on the camera.| See A

( 0 8)

u CPU contacts| Used to transfer data to and from the

camera.

| —
i Front lens cap| —| —
o Rear lens cap| —| —

Attachmenttachment and Removal

Attaching the Lens

1. Turn the camera off, remove the body cap, and detach the rear lens cap.
2. Position the lens on the camera body, keeping the mounting mark on the lens aligned with the mounting mark on the camera body, and then rotate the lens counterclockwise until it clicks into place.

Removing the Lens

1. Turn the camera off.
2. Press and hold the lens release button while turning the lens clockwise.

Before Use
The lens is retractable and must be extended before use. Rotate the zoom ring as shown until the lens clicks into the extended position. Pictures can only be taken when the focal length mark points t  positions between 16 and 50 on the focal length scale.

To retract the lens, rotate the zoom ring in the opposite direction stopping when you reach the (●) position on the focal length scale If the camera is turned on with the lens retracted, a warning will b displayed. Extend the lens before use

Attaching and Removing Optional Lens Hoods
Lens hoods (available separately) screw directly into the threads in front of the lens. Do not touch the  glass surface of the lens or use excessive force. To remove the hood, unscrew it from the lens.

Using the lens on cameras with a built in a flash
Shadows will be visible in photos where the light from the built-in flash is obscured by the lens or lens hood. Remove the lens hood before shooting. Note, however, that even if the hood is removed, shadows may still be visible at some focal lengths and subject distances.

Vibrabration Reduction(VR)
The lens’s onboard vibration reduction can be enabled or disabled us-ing camera controls; see the camera manual for details. With [Normal] selected for the on-camera vibration reduction option, vibration reduction allows speeds up to 4.5 stops slower than would otherwise be the case, expanding the range of shutter speeds available. Measured according to CIPA standards. Values for lenses that support FXformat are measured on FX-format mirrorless cameras, those for DX lens-es on DX-format mirrorless cameras. Values for zoom lenses are measured at maximum zoom.

Vibration Reduction

• Due to the design of the vibration reduction system, the lens may rattle when shaken. This does not indicate a malfunction.
• To reduce blur caused by tripod shake, select [Normal] or [Sport] for the on-camera vibration reduction option when the camera is mounted on a tripod. Note, however, that depending on the type of tripod and shooting conditions, there may be cases in which [Off] is the preferred option.
• [Normal] or [Sport] is recommended when the camera is mounted on a monopod.

WhenLens Attached

• The focus position may change if you turn the camera off and then on again after focusing. If you have focused on a pre-selected location while waiting for your subject to appear, we recommend that you do not turn the camera off until the picture is taken.
•  Mounting this lens on an FX-format camera:
  • selects the DX image area, reducing the available focus points and number of pixels recorded, and
  • disables the [Image Dust Off ref photo] option in the setup menu.
•  Movies shot with the lens mounted on a Z 6 and 1920 × 1080 120p, 1920 × 1080 100p, or 1920 × 1080 slow-motion selected for [Frame size/frame rate] in the movie shooting menu will be recorded at the following frame sizes and rates:
  • 1920 × 1080; 120p → 1920 × 1080; 60p
  • 1920 × 1080; 100p → 1920 × 1080; 50p
  • 1920 × 1080; 30p ×4 (slow-motion) → 1920 × 1080; 30p
  • 1920 × 1080; 25p ×4 (slow-motion) → 1920 × 1080; 25p
  •  1920 × 1080; 24p ×5 (slow-motion) → 1920 × 1080; 24p

Precautions for  Use

• Do not pick up or hold the lens or camera using only the lens hood.
• Keep the CPU contacts clean.
• Replace the front and rear lens caps when the lens is not in use.
• To protect the interior of the lens, store it out of direct sunlight.
• Do not leave the lens in humid locations or in locations in which it may be exposed to moisture. Rusting of the internal mechanism can cause irreparable damage.
• Do not leave the lens next to open flames or in other extremely hot locations. Extreme heat could damage or warp exterior parts made from reinforced plastic.
• Taking the lens from a warm to a cold environment or vice versa may cause damaging condensation inside and outside the lens. Place the lens in a sealed bag or plastic case before taking it across a tempera-ture boundary. The lens can be taken from the bag or case once it has had time to adjust to the new temperature.
• We recommend that you place the lens in a case (available separately) to protect it from scratches during transport.

Lens Care

• Removing dust is normally sufficient to clean the glass surfaces of the lens.
• Smudges, fingerprints, and other oily stains can be removed from the lens surface using a soft, clean cotton cloth or lens cleaning tis-sue lightly dampened with a small amount of ethanol or lens cleaner. Wipe gently from the center outwards in a circular motion, taking care not to leave smears or touch the lens with your fingers.
• Never use organic solvents such as paint thinner or benzene to clean the lens.
• Neutral Color (NC) filters (available separately) and the like can be used to protect the front lens element.
• If the lens will not be used for an extended period, store it in a cool, dry location to prevent mold and rust. Do not store in direct sunlight or with naphtha or camphor moth balls.

ACCESSORIES

supplied accessories

• LC-46B 46 mm snap-on Front Lens Cap
• LF-N1 Rear Lens Cap

Compatible Accessories

• CL-C4 Lens Case
• HN-40 Screw-on Lens Hood
• 46 mm screw-on filters

Filters

• Use only one filter at a time.
• Remove the lens hood before attaching filters.

SPECIFICATIONS

Specifications

Mount| Nikon Z mount
Focal length| 16 – 50 mm
Maximum aperture| f/3.5 – 6.3
Lens construction| 9 elements in 7 groups (including 1 ED element and

4 aspherical elements)

Angle of view| 83°–31° 30′ (DX image area)
Focal length scale| Graduated in millimeters (16, 24, 35, 50)
Focusing system| Internal focusing system
Vibration reduction| Lens shift using voice coil motors (VCMs)
Minimum focus distance

(measured from the focal plane)

| •    16 mm zoom position: 0.25 m (0.82 ft)

•    24 mm zoom position: 0.2 m (0.66 ft)

•    35 mm zoom position: 0.23 m (0.76 ft)

•    50 mm zoom position: 0.3 m (0.99 ft)

Maximum reproduction

ratio

| 0.2×
Diaphragm blades| 7 (rounded diaphragm opening)
Aperture range| •    16 mm zoom position: f/3.5 – 22

•    50 mm zoom position: f/6.3 – 40

The minimum aperture displayed may vary de- pending on the size of the exposure increment selected with the camera.

Filter-attachment size| 46 mm (P = 0.75 mm)
Dimensions| Approx. 70 mm/2.8 in. maximum diam-

enter × 32 mm/1.3 in.

(distance from camera lens mount flange when the lens is retracted)

Weight| Approx. 135 g (4.8 oz)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>