LEXON LA129 Mino Plus L Bluetooth Speaker User Manual
- June 4, 2024
- LEXON
Table of Contents
LEXON LA129 Mino Plus L Bluetooth Speaker
What’s in Box
- Speaker
- Microphone (Hands-free phone call)
- Multi-Function Button (MFB button)
- USB type-C port
- Light indicator
- Wireless charging receiver
CHARGING
- Charge with USB cable
- Plug the provided USB Type-C cable into the charging port of Mino+ L.
- Plug the USB end of the cable into any computer or any DC 5V-1A power supply charger.
- Charge with Wireless Charger ino+ L has a built-in wireless charging receiver. You can charge the battery by using a wireless charger.
- Place Mino+ L at the center of the wireless charger.
- Disconnect the device once the battery has been fully charged
AIRING / CONNECTING
Bluetooth® pairing
air 1 MINO+ L
- Turn on Mino+ L by pressing the “MFB” button for few seconds.
- When the speaker is in pairing mode, it will emit a sound as notification and the Blue light indicator will start flashing rapidly. . Go into the Bluetooth® settings of your smartphone and make sure to switch on the Bluetooth® mode.
- Scroll to Other or new Devices and look for your new Bluetooth® speaker’s “LEXON MINO+ L”.
- Once it appears, tap it to connect. Your speaker will emit a confirmation sound as soon as it is paired.
Note : Once paired and connected, the Bluetooth® speaker will be automatically connected to your device whenever you turn the speaker n again, provided the device is in range.
air 2 MINO+ L (with the True Wireless Stereo technology)
- Turn on both Mino+ L by pressing the “MFB” button for few seconds.
- Before connecting both speakers devices with your smartphone, make sure to double press the “MFB” button of one Mino+ L until hearing a continuous “du-du-du” sound. This Mino+ L will serve as the host device and it will actively search for the second Mino+ L. A sound will confirm that both Mino+ L are successfully paired. The “LEXON MINO+ L” can automatically be paired together thanks to he TWS technology.
- Turn on the Bluetooth® of your smartphone, search for Bluetooth® speaker’s “LEXON MINO+ L”
- Once it appears, tap it to connect. Your speaker will emit a confirmation sound as soon as it is paired.
Note : Once paired and connected, the Bluetooth® speaker will be automatically connected to your device whenever you turn the speaker n again, provided the device is in range.
Light status indicator
| peration mode | ight (5) |
|---|---|
| ower supply | teady Red light |
| ower On (Long press MFB button) | lashing Blue light and emits a sound |
| ower Off (Long press MFB Button) | mits a sound |
| nter in pairing mode | lue light flashing quickly |
| luetooth® device connected with phone | teady Blue light and emits a |
sound
laying Music| lue light flashing slowly
If the indicator light does not work as described above, unplug the charger from MINO+ L and reconnect it.
Bluetooth® Hands-Free Operations
Answer/Hang up a call: Press the “MFB” button once. Reject a call: Long press the “MFB” button.
Selfie control function
- Make sure that your “LEXON MINO+ L” is paired with your smartphone.
- Open the native camera of your smartphone and position your phone on a stable surface.
- Ensure that your speaker is in range and press the “MFB” button to take a picture.
How to pair with another phone
- To pair your speaker with another phone, make sure that your Bluetooth® speaker is ON and short press the “MFB” button twice.
- To disconnect or forget “LEXON MINO+ L” directly from your smartphone’s Bluetooth® settings first.
- Then, perform a new pairing procedure with another smartphone.
SAFETY PRECAUTIONS
Read all the instructions before using the device:
- Protect the speaker from near heat sources such as radiators, heaters, air ducts, sunlight.
- Avoid contact with other liquids: keep away from corrosive liquids.
- Do not hit the product severely, or insert any conductive objects into the speaker, or charging port.
- Do not repair the speaker by yourself; seek for professional service.
- Avoid impacts.
- Do not expose Mino+ L to water during charging, as this could permanently damage the speaker or power source.
PRODUCT SPECIFICATIONS
- Material : Aluminium/ABS
- Weight : 0.54 lb / 245 g
- Dimensions : Ø3.6 x 1.18″/ Ø9.2 x 3 cm
- Water resistance : IPX4 – protects against everyday splashes and spills peaker power: 5W
- Bluetooth® version : 5.1
- Bluetooth® range : 10m
- Battery voltage : 3.7V
- Frequency range : 2402M-2480MHZ
- Max. Power output: +4dBm
- Normal usage time : 5h
- Input port : DC 5V-1A
- Battery type : Li-polymer
- Battery capacity: 900 mAh
- Charging system : USB Type-C or Supports wireless charging harging time (USB Type-C): approx. 2.5h
- Wireless input : 5W
- Charging time (wirelessly ): approx. 3h
- Operating temperature: -10°C – +50°C
- International warranty: 1 year
EUROPEAN UNION CE DIRECTIVE
LEXON hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the RE Directives 2014/53/EU.
The complete declaration of conformity is available at : https://www.lexon-
design.com/assets/certifications-ce-minoplusl.pdf
UK conformity assessment
The object described above is in conformity with the essential requirements
and other relevant provisions of the UK Radio Equipment Regulations 2017 (SI
2017/1206).
The original UK declaration of conformity may be found at: https://www.lexon-
design.com/assets/certifications-ukca-minoplusl.pdf
RF Specification
- Bluetooth: 2402-2480 MHz
- WPT: 110 kHz-148 kHz (RX)
- BT transmitter power : -0.61 dbm
DISPOSAL AND RECYCLING INFORMATION
After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies : electrical and electronic devices may not be dis-posed of with domestic waste. Consumers are obliged by law to return electrical and electronic device at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Notice:
Any changes or modifications not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
CANADIAN COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSS. Operation is
subject to the following two conditions:
This device may not cause interference, and This device must accept any
interference, including interference that may cause undesired operation of the
device. This Class B digital apparatus complies with Canadian ICES-0003.
The device has been evaluated to meet the general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.