LEXON LA131 Tamo Portable Bluetooth Speaker Instruction Manual

LEXON LA131 Tamo Portable Bluetooth Speaker

Product Information

Specifications

• Model: LA131
• Brand: TAMO
• Designers: Manuel Simonelli & Andrea Quaglio
• Charging: USB Type-C cable or wireless charging pad
• Charging Time: Approximately 3 hours for a full charge
• Network Connectivity: Unified Audio Network
• LED Indicators: Pairing status, Charging status

Product Usage Instructions

Charging
Charging via USB-C cable:

1. Plug the provided USB Type-C cable into the charging port of Tamo.
2. Plug the other end of the cable into any computer or DC 5V power charger.
3. Check the charging LED to confirm Tamo is properly charging.
4. A full charge takes approximately 3 hours.
5. Remove the device once the battery is fully charged.

Charging via a wireless charging pad:

1. Place Tamo in the center of the wireless charging pad (not included).
2. Ensure the charging LED indicates proper charging status.

Pairing

1. Press and hold Tamo’s power button for 3 seconds to turn it on.
2. Follow the pairing instructions and start playing music.

Unified Audio Network

1. Pair multiple Tamo speakers by following pairing instructions.
2. To create a unified audio network, switch on multiple Tamo speakers and press the button twice on the first paired device.
3. Master device controls audio functions like play/pause, track change, and volume adjustment.
4. To disconnect the network or remove a speaker, follow the specified button operations.

Operations
Button operations:

• Turn ON/OFF speaker: Press & hold
• Audio network pairing: Double press the master device button
• Unpairing: Double press on the device to be removed from the network

Touch operations:

• Play / Pause (A): Short touch
• Next track (B): Double touch
• Volume adjustment (C): Touch & hold
• Answer / End a call: Short touch

LED Information

• Pairing status:
  • Ready to pair: Blue LED flashing slowly
  • Connected / Master device: Blue LED ON
• Charging status:
  • Charging: Red LED ON
  • Fully charged: Red LED OFF

Frequently Asked Questions (FAQ)

Q: How do I know if my Tamo speaker is fully charged?
A: The red LED indicator will turn off when the Tamo speaker is fully charged.

Q: Can I add more speakers to the unified audio network after initial setup?
A: Yes, you can add additional speakers by simply switching them on; they will pair up automatically.

IN THE BOX

• 1x Tamo
• 1x USB-C charging cable
• 1x User manual

OVERVIEW

1. Speaker
2. Touch area
3. Wireless charging receiver
4. Button
5. LED for Bluetooth® & Charging status
6. USB-C port
7. Microphone

CHARGING via USB-C cable

1. Plug the provided USB Type-C cable into the charging port of Tamo.
2. Plug the other end of the cable into any computer or any DC 5V power charger.

A full charge takes approximately 3 hours.

CHARGING via a wireless charging pad

1. Place Tamo in the center of the wireless charging pad (not included). Check the charging LED to confirm TAMO is properly charging
2. Remove the device once the battery is fully charged.

PAIRING

1. Enable Bluetooth® on your mobile device.
2. Press and hold Tamo’s power button for 3 seconds.
3. Select “LEXON TAMO” from the Bluetooth® list on your mobile device.
4. Start playing music.

UNIFIED AUDIO NETWORK

To create a unified audio network, follow the instructions below:

1. Follow the pairing instructions described above.
2. Then switch on as many Tamo speakers as you want and press the button twice on the first Tamo you’ve paired. The other devices will automatically connect to the same network.
3. Once the audio network is established, the Tamo speaker you’ve first paired (Master device) will remain illuminated, while the LEDs on the other speakers will flash slowly.

Once the network has been successfully set up, you can add other speakers to the network by simply switching them ON. They’ll pair up automatically.
Important note: Only the Master device with the continuously illuminated Blue LED can control audio functions. Use the master device for actions like play/pause, track change, or volume adjustment.
To completely disconnect the network, press the master device button twice. To remove a speaker from the network, double-press the button on the speaker you wish to remove.

OPERATIONS

Short touch
Take a photo| Short press| Next track (B)| Double touch
Audio network pairing| Double press the master device| Volume adjustment (C)| Touch & hold
Unpairing| Double press| Answer / End a call| Short touch

LED INFORMATION

Red LED OFF

SAFETY PRECAUTIONS

• Make sure to respect the technical specifications for charging and never use a power adapter delivering more voltage output than the one indicated to avoid any irreversible damage to the internal circuit (DC Input: 5V)
• Do not place the device near heat sources such as heaters or radiators.
• Do not expose the device to water and keep away from corrosive liquids.
• Do not open the device or attempt to disassemble the internal parts or modify it in any way.

PRODUCT SPECIFICATIONS

• Material: Aluminum / ABS / Silicone
• Weight: 0.12 lbs / 55 g
• Dimensions: Ø2.09 x 1.65″ / Ø5.3x 4.2cm
• Speaker power: 3W
• Bluetooth® version: 5.0
• Bluetooth® range: 10m
• Frequency range: 2.402 – 2.480 GHz
• Battery capacity: 300 mAh
• Battery voltage: 3.7V
• Input voltage: 5V
• Playtime: 3h
• Charging time: 1h
• Charging system:  USB Type-C or wirelessly
• Operating temperature: 0°C – 35 °C
• International warranty: 1 year

EUROPEAN UNION
CE DIRECTIVE
This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. This restriction will be applied to all Member States of European Union. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Declaration of Conformity
Hereby, LEXON declares that the product type LA131 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.lexon- design.com/assets/certifications-ce-tamo.pdf

UK CONFORMITY ASSESSMENT
The device is in compliance with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations SI 2017:1206 (as amended).
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Declaration of Conformity:
Hereby, LEXON declares that the product LA131 is in compliance with the following Regulations: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electrical Equipment 2012. The Full test of the UK declaration of conformity is available at the following internet address: https://www.lexon-design.com/assets/certifications-uk-ca-tamo.pdf

WPT:

• RX Frequency Range: 110-148 KHz
• Bluetooth:
• Transmitter power: 4.59dBm(for EU/UK only)
• RX Frequency Range: 2400-2480MHz

DISPOSAL AND RECYCLING INFORMATION
After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies: electrical and electronic devices may not be
disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic device at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.

USA – FCC STATEMENT
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Notice:

Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

RF exposure statements
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

CANADIAN COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

125, Avenue des Champs-Elysees – 75008 Paris – FRANCE
All trademarks, logos and brand names are the property of their respective owners.
Pictures and specifications are not contractual. Assembled in China.
lexon-design.com
@lexondesign

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>