HAMRON 010934 Glow Strip Instruction Manual
- June 4, 2024
- HAMRON
Table of Contents
HAMRON 010934 Glow Strip Instruction Manual
Care for the environment!
Recycle discarded product in accordance with local regulations. Julia reserves the right to make changes. For latest version of operating instructions, see www.jula.com
Safety Instruction
Symbols
| Read the instructions.
---|---
| Approved in accordance with the relevant directives.
| Recycle discarded product in accordance with local regulations.
Technical Data
- Voltage Size: 12 V
- Size: L2 m
- Colour of glow strip
- 010934: Blue
- 010935: Red
- 010936: White
INSTALLATION
-
Disconnect the glow strip from the actuator.
FIG. 1
-
Place the glow strip at the required place in the vehicle (for example in a slot by the sun roof or dashboard, door covering, center panel etc.). Use a suitable tool (sold separately) to press it in so that it is flush with the surrounding surface.
-
Route the cables so they cannot be seen and connect the glow strip to the actuator.
-
Connect the actuator cables to the vehicle battery with the correct polarity.
-
The product goes on when the vehicle is started or the actuator is connected to supply voltage