LIVEX LIGHTING 46170 4-Light 25-Inch Shiny Black with Polished Brass Accents Incandescent Flush Mount Light Instruction Manual
- June 8, 2024
- Livex Lighting
Table of Contents
46170 4-Light 25-Inch Shiny Black with Polished Brass
Accents Incandescent Flush Mount Light
Instruction Manual
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
- WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
- ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.
ASSEMBLING THE FIXTURE
-
Shut off the power at the circuit breaker box. Remove old fixture and all hardware from Junction Box.
-
Carefully unpack your new fixture and lay out all the parts on a clear area. Be care not to lose any small parts necessary for installation.
-
Attach the crossbar to the Junction Box with the two junction box screws as shown. The side of the cross bar marked “GND” must face out. The junction box is not included.
-
While holding the lamp body(C) towards the ceiling, connect the electrical wires as Shown in Fig.2, making sure that all wire nuts are secured. You may have to wrap the connections with electrical tape.
If your outlet has a ground wire (green or bare copper), connect the fixture ground wire to it. Otherwise connect fixture’s ground wire directly to the Mounting plate with the green screw provided. After wires are connected, tuck them carefully inside the Junction Box. -
Install lamp body(C) onto the junction box, aligning screw hole on crossbar with mounting holes in canopy and lock it securely with the screws (D).
-
Install the light bulbs(not included) in accordance with the fixture’s specifications. NOTE: DO NOT EXCEED THE SPECIFIED WATTAGE!
-
Raise the end thread of the pipe(A) insert to the top thread hole of the lamp body(C), by turn it clockwise until tight. Raise the end thread of the pipe(B) insert to the bottom adjacent thread hole of the pipe(A), by turn it clockwise until tight. Assembled using the same method the others pipes(order: A, B, A,B……).
Your installation is now complete. Return power to the junctionbox and test the fixture.
Thank you for purchasing a LIVEX product.
Need assistance with parts or assembly? Please call customer service at:
800-761-8056
Or visit us online at: WWW.LIVEXLIGHTING.COM
COPYRIGHT ALL RIGHTS RESERVED.LIVEX LIGHTING,
INC. DOC20220146170
Documents / Resources
|
LIVEX LIGHTING 46170 4-Light 25-Inch Shiny Black with Polished Brass Accents
Incandescent Flush Mount
Light
[pdf] Instruction Manual
46170 4-Light 25-Inch Shiny Black with Polished Brass Accents Incandescent
Flush Mount Light, 46170, 4-Light 25-Inch Shiny Black with Polished Brass
Accents Incandescent Flush Mount Light, Polished Brass Accents Incandescent
Flush Mount Light, Brass Accents Incandescent Flush Mount Light, Accents
Incandescent Flush Mount Light, Incandescent Flush Mount Light, Flush Mount
Light, Mount Light, Light
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>