MICCELL BH20 True Wireless Earphone User Manual
- June 1, 2024
- MICCELL
Table of Contents
MICCELL BH20 True Wireless Earphone
- Please read this instruction carefully before use, and keep it in a safe place for future reference.
Basic parameters
- Pairing name: BH20
- Frequency: 2402~ 2480MHz
- Working environment: 5~40°C
- Use time: 2~3 hours
- Charging interface: Type-C
- Headphone charging time: 1 h
- Headphone battery capacity: 25mAh*2
- Charging compartment battery capacity: 230mAh
- Headphone rated input: 5V==20mA
- Charging compartment rated input: 5V=200mA
- Product size: 525527mm
- Version: BT 5.3
- Horn specification: 13mm
- Working distance: 10 meters
- Standby time: ~180 days
- Product weight: 28g
- Charging bin charging time: 21 h
Product Description
Charge the charging case
Please use the Type-C charging cable to connect the charging case to the 5V
power adapter
- Rated input: 5V 20mA (headphone), 5V 200mA (charging compartment)
Charging instructions
-
Charge the earphones: put the earphones into the charging compartment, the earphones will automatically enter the charging state, and the charging compartment and the earphones will be green when charging.
The light is always on, and the green light is off when fully charged. -
Charging the charging case: Use the Type-C charging cable included in the package to charge the charging case, and the white light flashes when charging. The white light turns off when fully charged.
-
The battery of the headset is low: the voice prompt of the headset is [Low battery].
Warn:
Please use a 5V-1A charger to charge this product, do not use fast charging, otherwise there will be risks such as short circuit explosion.
Product Operating Instructions
- Boot
- Method 1: Open the cover of the charging compartment and take out the earphones;
- Method 2: In the off state, press and hold the multi-function button of the headset for 5 seconds.
- Shutdown
- Method 1: Put the headset into the charging compartment, close the cover of the charging compartment, and turn off the headset;
- Method 2: In the power-on state, it will automatically shut down if there is no connection for 3 minutes.
- Pairing
- Method 1: Take the earphones out of the charging compartment, and the earphones will automatically turn on and connect.
- Method 2: Open the Bluetooth list of the smart device, search [ BH20 ] for pairing, and you will hear a prompt tone after the connection is successful.
If the distance is exceeded, it will return to the effective distance within 2.5 minutes after disconnection, and the device will be automatically connected.
Touch Operation Instructions
- Voice Assistant: Press and hold the multi-function button for 2s on any side, and click Cancel.
- Pause/Play: Click the multi-function button on any side.
- Next song: Double-click the multi-function button of the right earphone.
- Previous song: Double-click the multi-function button of the left earphone.
- Increase the volume: triple-click the multi-function button of the right earphone.
- Decrease the volume: triple-click the multi-function button on the left earphone.
- Answer the call: In the incoming call state, click the multi-function button on any side.
- Hang up the phone: In the call state, double-click the multi-function button on any side.
- Reject the call: In the incoming call state, press the multi-function button three times on any side.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used under the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>