EMERSON Update Advisory Supervisory Control Platform Firmware 2.23F02 User Guide

EMERSON Update Advisory Supervisory Control Platform Firmware 2.23F02

User Guide

Update Advisory Supervisory Control Platform Firmware 2.23F02 Release

Notes

A new general release version of the Supervisory controller firmware version 2.23F02 has been released and is available for customer upgrade. For more information, visit the Supervisory Control page on the Emerson website:

https://climate.emerson.com/en-us/products/controls-monitoring-systems/ facility-controls-electronics/facility-and-system-controls/lumity- supervisory- controls-platform

_ _IMPORTANT__ :

• **Reset or power cycle an upgraded E3 approximately10 minutes after the upgrade is

**

Figure 2 – Site Supervisor Controller

Who Should Update

Emerson recommends that all customers upgrade their Supervisory controllers and PCs running Connect+ to the latest version to take advantage of the latest fixes and enhancements listed in Table 3.
All customers who use any of the features below are advised to upgrade to Supervisory controller 2.23F02, and customers using any of the features listed in Table 3 .

• Processor

Interface Board (PIB)

• R448A Refrigerant
• Floor Plans
• REST
• Logs

                      Figure 1 – E3 Controller

CONNECT+ UPDATE RECOMMENDED

Table 1 – Supervisory Controller and Connect+ Compatibility Matrix It is recommended to upgrade to the latest Connect+ version. If you plan to upgrade Supervisory controllers and Connect+ at the same time, upgrade Connect+ to the latest version first, then update the Supervisory controllers. Contact Emerson for more information about upgrading.

CONTROLLER FIRMWARE COMPATIBILITY

Table 2 – Firmware Platform Mapping

__

Feature and Fix Descriptions

| Supported in Supervisory Controllers 2.23F02
---|---
Feature|
System

DHCP & NTP: If the DHCP lease includes the NTP server IP address when enabled:

a.         At least one IP will be checked to verify if there is a valid NTP server IP.

b.        If at least one IP is a valid NTP server IP, the existing NTP server configuration will be replaced with these new IPs.

| __

__

ü

Fixes|
E3 Processor Interface Board (PIB)

Ø  Added time stamp to PIB log.

Ø  Added new PIB log report.

Ø  PIB will no longer intermittently restart for “socket error -5”

| __

ü

REST Reset Advisory (Service Log)

Ø  If advisories are reset by the REST interface, memory leak will not occur.

| ü
Refrigerants

Ø  R448A refrigerant is now converting correctly.

| ü
System Logs

Ø  The PIB Error Log will no longer appear truncated.

| ü
Floor Plans

Ø  File size limit has been increased.

| ü

** Table 3 – Supervisory Controller 2.23F02 Feature _and

Fix Matrix_**

Document Part # 026-4083 Rev 2

©2023 Emerson Digital Cold Chain, Inc. This document may be photocopied for personal use.
Visit our website at www.climate.emerson.com for the latest technical documentation and updates.

Update Supervisory Controller Firmware

__

For more information on firmware upgrades, see the 026-4184 Upgrade Advisory: https://climate.emerson.com/documents/026-4184-upgrade-advisory-for-all- supervisory-controller-versions-before-2-19f01-en- 7981974.pdf
For more information on E3 firmware upgrades before 2.20F03, see the 026-4185 Upgrade Advisory
https://climate.emerson.com/documents/026-4185-upgrade-advisory-for-e3 -controller-versions-below-2-20f03-en-8070726.pdf

Supported Browsers

• Microsoft Edge v88 and later
• Mozilla Firefox 11 and later
• Google Chrome 0 and later
• Apple Safari® on iOS10 (iPhone® 5C, iPad® 4) and later
• Webview on Android 5.0 (Samsung Galaxy S4) and later

For Emerson Digital Cold Chain Technical Support

• 833-409-7505
• Co TechnicalServices@Emerson.com

Document Part # 026-4083 Rev 2 Page 3 of 3

This document may be photocopied for personal use.
Visit our website at www.climate.emerson.com for the latest technical documentation and updates.
Join Emerson Technical Support on Facebook http://on.fb.me/WUQRnt

For Technical Support call833-409-7505 or email ColdChain.TechnicalServices@Emerson.com

__The contents of this publication are presented for informational purposes only and they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. Emerson reserves the right to modify the designs or specifications of such products at any time without notice. Responsibility for proper selection,

use and maintenance of any product remains solely with the purchaser and end-user. ©2023 Emerson is a trademark of Emerson Electric Co

__

Read More About This Manual & Download PDF:

References

• Log into Facebook | Facebook
• Copeland | Copeland US
• Controls & Monitoring Systems | Copeland US
• Lumity Supervisory Control Platform | Copeland US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>