ORTECH TF-2×2-3CCT+W LED Troffer Panel Lights Instruction Manual

ORTECH TF-2×2-3CCT+W LED Troffer Panel Lights

Product Specifications

• Model: TF-2×2-3CCT+W | TF-2×4-3CCT+W
• Suitable for dry and damp locations
• Installation by a qualified electrician required
• Power: 12V
• Color Temperature Control (CCT)

Product Usage Instructions

1. Ensure installation is carried out by a qualified electrician.
2. Disconnect power before installation or maintenance to prevent electric shock.
3. Keep the LED panels away from corrosive substances and clean them with a dry cloth.
4. Unscrew the driver cover.
5. Connect the conduit to the driver box.
6. Connect other wires separately following the provided color codes.
7. Secure the driver cover back in place with screws.
8. Replace existing lighting fixture with LED Troffer.
9. Use protective brackets for safety.
10. Remove the PC cover and rubber plug from the sensor.
11. Connect the sensor terminals to the 12V terminal wire in the lamp body.
12. Install the PC cover to complete the sensor installation.
13. Secure troffer on the ceiling replacing the existing fixture.

FAQ

• Q: Can I install the LED Troffer Panel Lights myself?
• A: No, the installation must be carried out by a qualified electrician to ensure safety and proper functioning.
• Q: What should I do if I encounter any issues during installation?
• A: If you have any doubts or encounter difficulties during installation, consult a competent electrician for assistance to prevent injuries or damage.

MODEL

• TF-2×2-3CCT+W | TF-2×4-3CCT+W

WARNING

WARNING — THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

1. LED Back Lit Panels are suitable for using in dry and damp locations
2. Please keep the LED Back Lit Panels away from any corrosive substance, and please use dry cloth when you clean it
3. LED Back Lit Panels can only be installed by a qualified electrician
4. Before installation or maintenance, please disconnect the power to prevent electric shock
5. Make sure the distances between live part and metal part of LED troffer can satisfy reinforced or double insulation.

CAUTION

• PLEASE READ THE INSTRUCTIONS BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCE.
• Electrical products can cause death injury, or property damage.
• If in any doubt about the installation or use of this product, consult a competent electrician.

INSTALLATION GUIDE

1. Unscrew the driver cover.
2. Connect the conduit to the driver box.
3. Connect other wires separately.
4. Put back the driver cover and fix it with a screw.

RECESSED INSTALLATION

1. Replace the existing lighting fixture from the ceiling with LED Troffer.
2. Replace the existing lighting fixture from the ceiling with LED Troffer.
3. Use the protective brackets for the sake of safety.

PNP-SENSOR-DS INSTALLATION

1. Remove the PC cover of the fixture, and take off the rubber plug fixed on the sensor of the Troffer body;
2. Connect the terminals of the sensor to the 12V terminal wire reserved in the lamp body by plugging it in；
3. Install the PC cover, the sensor installation is complete；
4. Install the troffer on the ceiling by replacing the existing fixture on the ceiling;
5. After connecting the wires well put back the terminal box lid and tighten a screw on the terminal box lid.
6. Please use a protective bracket for safety. Finally, the installation of the sensor is complete.

ORTECH reserves the right to modify at any time, without notice, any or all of our product’s features, designs, components, and specifications to meet market changes.

CONTACT

• info@ortechindustries.com
• www.ortechindustries.ca
• 13376 Comber Way
• Surrey BC V3W 5V9
• 205 Summerlea Rd,
• Brampton, ON L6T 4E5
• 1-888-543-6473
• 1-888-541-6474

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>