ORTECH UFO-150-3CCT+W LED UFO High Bays Owner’s Manual
- May 15, 2024
- Ortech
Table of Contents
ORTECH UFO-150-3CCT+W LED UFO High Bays
WARNING
WARNING — THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.
- LED UFO High Bays must be grounded
- Please keep the LED UFO High Bays away from any corrosive substance, and please use dry or wet cloth when you clean it
- LED UFO High Bays can only be installed by a qualified electrician
- Before installation or maintenance, please disconnect the power to prevent electric shock
- Always keep the lens/diffuser of the LED UFO High Bay cleaned to maintain good light transmission
- At all times, keep the shell of the LED UFO High Bay cleaned to retain good heat dissipation
CAUTION
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.
Electrical products can cause death or injury, or damage to property.
If in any doubt about the installation or use of this product, consult a competent electrician.
INSTALLATION GUIDE
Hook type Installation
-
Tighten the hook clockwise
-
Tighten the screw
-
Hang the light
-
Tighten the screw
CUSTOMER SUPPORT
ORTECH reserves the right to modify at any time, without notice, any or all of our product’s features, designs, components and specifications to meet market changes.
13376 Comber Way 205 Summerlea Rd
Surrey BC V3W 5V9 Brampton, ON L6T 4E5
info@ortechindustries.com
www.ortechindustries.ca
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>