behringer MIC LINK Compact Dynamic Microphone Booster User Guide

: June 16, 2024
: Behringer

Table of Contents

behringer MIC LINK Compact Dynamic Microphone Booster
Product Information
H00K UP
Features
Operation
Specifications
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

behringer MIC LINK Compact Dynamic Microphone Booster

Product Information

Specifications

Product Name: MIC LINK
Type: Compact Dynamic Microphone Booster
Preamp: High-Quality Preamp
Version: 1.0

Safety Instructions

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Use only attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE).
The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
Do not install in a confined space, such as a bookcase or similar unit.
Do not place naked flame sources, such as lighted candles, on the apparatus.

Hook-up
For microphone connection and usage, follow these steps:

Connect the XM8500 Dynamic Microphone to the MIC LINK using an XLR cable.
Ensure that the MIC LINK is powered on and connected to the desired audio equipment.
If using a mixer, connect the MIC LINK output to one of the mixer’s input channels.
If phantom power is required for the microphone, make sure it is enabled on the audio equipment or mixer.
Adjust the microphone gain on the MIC LINK to achieve the desired level.
You can now use the microphone connected to the MIC LINK for various applications such as recording, live performances, broadcasting, etc.

Safety Instruction

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Use only attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on theenvironment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
Do not install in a confined space, such as a book case or similar unit.
Do not place naked flame sources, such as lighted candles, on the apparatus.

H00K UP

Features

Dynamic mic booster adds extra gain to your sound
High-quality preamp provides up to +27 dB of gain
Phantom powered with no need for external power supply
Works with almost any dynamic or passive ribbon microphone
Rugged, road-worthy construction for years of dependable use

Operation

Gently plug your dynamic or ribbon microphone into MIC LINK’s
female XLR receptacle, and then plug the female end of your XLR mic
cable into MIC LINK’s male XLR receptacle. Then, plug the XLR cable’s
male end into your mixer. Once the XLR plug is firmly connected to the
mixer, activate phantom power on your mixer or mic preamp.

Specifications

Amplifier
- Class A FET
Gain
- +27 dB with 10 kΩ load
Compatibility
- Dynamic or ribbon microphones
Input
- XLR, balanced, 40 kΩ
CMRR
- Typically -50 dB
Maximum input level
- -14 dBu
Output
- XLR, balanced, 2.5 kΩ
Maximum output level
- +13 dBu with 10 kΩ load
EIN noise
- -127 dBu with 10 kΩ load
Frequency response
- 10 Hz to 50 kHz (±0.5 dB)
Distortion
- <0.3% @ 1 kHz, 0 dBu output
Power requirements
- +24 V to +48 V phantom power
Operating Temperature
- 5° C – 45° C (41° F – 113°F)
Dimensions
- (L x W x H) 77.35 x 23.28 x 26.33 mm (3.05 x 0.92 x 1.04″)
Weight
- 63 g (2.23 oz)

Hereby, Music Tribe declares that this product is in compliance with Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directiv 1907/2006/EC, and this passive product is not applicable to EMC Directive 2014/30/EU, LV Directive 2014/35/EU. Full text of EU DoC is available at https://community.musictribe.com/ EU Representative: Music Tribe Brands DK A/S Address: Gammel Strand 44, DK-1202 København K, Denmark UK Representative: Music Tribe Brands UK Ltd. Address: 8th Floor, 20 Farringdon Street London EC4A 4AB, United Kingdom

FAQ

Q: Can I use the MIC LINK near water?

A: No, it is not recommended to use the MIC LINK near water to avoid potential damage or electric shock.

Q: Can I clean the MIC LINK with a wet cloth?

A: No, you should only clean the MIC LINK with a dry cloth to prevent any moisture from entering the device.

Q: Can I install the MIC LINK near heat sources?

A: No, it is advised to keep the MIC LINK away from heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat to prevent any damage to the device.

Q: Can I dispose of the MIC LINK with household waste?

A: No, the MIC LINK should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE) to ensure proper disposal and minimize the impact on the environment and human health.