COOPER Lighting Solutions CLS-1TLB-RL-W Digital Wired Wallstation with Icannet Communication Installation Guide

: June 15, 2024
: COOPER Lighting Solutions

Table of Contents

Top Product Features
Product Features
Dimensional Details
Mounting Height
Order Information
Overview
Product Specifications
Wiring Diagram
Supplied Parts
System architecture
Sample System Topology:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

COOPER Lighting Solutions CLS-1TLB-RL-W Digital Wired Wall station with Icannet Communication

Top Product Features

Configurable through software, no physical adjustments necessary
Create virtual groups for flexible configurations
Suitable for standard single or multi-gang NEMA wall zone or area

Product Features

Wave Linx Wired 5-Wire Bus
Manual Dimmer
Task Tuning

Dimensional Details

10 standard button configurations
Mounts to standard NEMA style Backbox, standard decorator insert size

Mounting Height

Order Information

SAMPLE ORDER NUMBER: CLS-1TLB-RL-W

Catalog Number

Series| Number of Buttons| Button Size| Raise/Lower/ON/OFF| Color| Button Engraving
---|---|---|---|---|---
CLS = INEO Series| 1-3 = Large Buttons (TLB), no Raise/Lower, On/Off
1-2 = Large Buttons (TLB), Raise/Lower, On/Off
2-6 = Small Buttons (TSB), no Raise/Lower, On/Off
2-4 = Small Buttons (TSB), Raise/Lower, On/Off| TLB = Large Buttons
TSB = Small Buttons| Blank = No Raise/Lower/ON/OFF
RL = Raise/Lower/ON/OFF| W = White B = Black V = Ivory| BLANK = Standard Engraving

ENGRV = Customer Specified Engraving

For custom configurations or custom engraving, use the configurator tool within the FlashPro tool.

Buttons Only

Catalog Number

Series| Number of Buttons| Button Size| Raise/Lower/ON/OFF| Color| Button Engraving
---|---|---|---|---|---
CLS-BTS =

INEO Series – BUTTONS ONLY

| 1-3 = Large Buttons (TLB), no Raise/Lower, On/Off

1-2 = Large Buttons (TLB), Raise/Lower, On/Off

2-6 = Small Buttons (TSB), no Raise/Lower, On/Off

2-4 = Small Buttons (TSB), Raise/Lower, On/Off

| TLB = Large Buttons

TSB = Small Buttons

| Blank = No Raise/Lower/ON/OFF

RL = Raise/Lower/ON/OFF

| W = White B = Black V = Ivory| BLANK = Standard Engraving

ENGRV = Customer Specified Engraving

For custom configurations or custom engraving, use the configurator tool within the FlashPro tool.

Description	Image
1 Large Button CLS-1TLB-W
1 Large Button Raise & Lower ON/OFF CLS-1TLB-RL-W
2 Large buttons CLS-2TLB-W
2 Large buttons Raise & Lower ON/OFF CLS-2TLB-RL-W
3 Large buttons ON/OFF CLS-3TLB-W
2 Small Buttons CLS-2TSB-W
2 Small buttons ON/OFF Raise & Lower CLS-2TSB-RL-W
4 Small buttons CLS-4TSB-W
4 Small buttons ON/OFF Raise & Lower CLS-4TSB-RL-W
6 Small buttons CLS-6TSB-W

*One single gang color matching wallplate included

Overview

Ineo is the specification grade range of wall stations that combine the easiest user interface in the industry with a large circular ON/OFF button, a universal module with up to 10 button configurations, large or small button options, and engraving.
Designed to fit with standard decorator wall plates, Ineo wall stations can be ganged together to meet specific project needs. Individual buttons have backlight indicator lights and strong tactile feedback.
Ineo is the clean, elegant, and simple way to control lighting on your project.

Product Specifications

Functionality

4 different styles of button caps that can be used to construct a wide range of derivatives:
- Scene
- Raise
- Lower
- ON/OFF
Choice of large or small button caps
Buttons available with standard or custom engraving
ON/OFF switch (Lightbulb icon – certain configurations)
- Double tap of the On/Off switch overrides the fade time
Flash memory for future proof upgradeability
Variable fade times programmable from 0.1 seconds to 60 minutes per button
Network Communication using iCANnet (iCANbus)
A range of ten standard wall station templates can be selected via the Source Controller for easy configuration
Using software each button can be configured to perform the following functions:
- Scene Selection
- Scene Raise/Lower
- Zone/Channel Raise/Lower
- Toggle ON/OFF
- Open/Close (for curtains, blinds, and partitions)
- Raise/Lower (motorized screens/blinds)
- Sequence control (16 sequences with up to 128 steps)

Operating Environment: 32° F to 104° F (0° C to 40° C) Humidity: 0% – 95% non-condensing

Suitable for standard single and multi-gang NEMA wall box with decorator style wall plate
All plastic construction with a separate decorator style snap on surround

Electrical

12 VDC supply voltage via the network
Digital network connection: Screw terminals with two part connectors,
able to accept 16 AWG (1.5mm) stranded or solid wire
Tested to withstand 12kV electro-static discharge without damage or memory loss
Configuration: Universal module allows for 10 unique button inserts to be added at anytime and configured through software

Standards/Ratings

Manufactured in an ISO 9001 certified factory
Meets ASHRAE Standard 90.1 requirements
Meets IECC 2015 requirements
Meets CEC Title 24 requirements

Warranty
Five year warranty standard

Mechanical

Note : Use of ammonia based or VOC cleaners on this device must be avoided. Prolonged use may cause loss of integrity and expose electrified components. If this occurs, turn OFF power to the unit and replace.

Wiring Diagram

Wave Linx Wired Network cable type – Cooper LCCNP (Non Plenum) Cable or LCCP (Plenum) or Belden 1502R (Non Plenum) or 1502P (Plenum)
CLS Wall stations require power from a Source Controller or Area Controller or a 15 VDC External Power Supply. Each Source Controller or Area Controller can power up to 10 wall stations/devices over a 1000 foot distance. For more than 10 wall stations/devices per Source Controller or Area Controller add a 15 VDC External Power Supply. For wall stations/devices further than 1000 feet from a Source Controller or Area Controller add a 15 VDC External Power Supply.
100 Devices per physical segment on the WaveLinx Wired Network, maximum segment distance of 1000m/3200ft. A network bridge (BN-2-NA) can be added to combine more than 100 devices together (up to 65,000 total) and to extend network cable distance.

Supplied Parts

System architecture

Complete WaveLinx Wired system

System architecture

Sample System Topology:

This diagram shows the main components of the WaveLinx wired and PRO wireless connected lighting system.
The WaveLinx PRO wireless system communicates using wireless mesh technology based on the IEEE 802.15.4 standard.
A PoE LAN connection for each WaveLinx Area Controller (WAC) is required for power and data access to the building lighting network.
The WaveLinx wired system controls the devices using relay, 0-10V, DMX and the WaveLinx wired digital local bus. The WaveLinx wired system connects to the building LAN using the EG2 module. Each WaveLinx wired area controller communicates on the WaveLinx wired network.
WaveLinx Area Controllers (WAC) and WaveLinx Ethernet Gateways (EG2) communicate with WaveLinx CORE over the Ethernet network.
Please refer to the WaveLinx PRO Wireless Network and IT Guidance Technical Guide and WaveLinx Wired Network and IT Guidance Technical Guide for more information.

https://www.cooperlighting.com/api/assets/v1/file/Signify/content/6cdb55a185e741af9f7ead40016a9c9f /wavelinx-network-it-guidance-tech-guide.PDF

Sample System Topology: