ORTECH FIRE DAMPER-PB Fire Dampers Instruction Manual
- May 15, 2024
- Ortech
Table of Contents
ORTECH FIRE DAMPER-PB Fire Dampers
WARNING
THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED TECHNICIAN
- Please WEAR GLOVES during the installation
- Please REMOVE the CORRUGATED BOARD before installation
- Fire Dampers can only be installed by a qualified electrician
CAUTION
PLEASE READ THE INSTRUCTIONS BEFORE COMMENCING INSTALLATION AND RETAIN THEM
FOR FUTURE REFERENCE. Failure to do so can cause death injury, or property
damage. If in any doubt about the installation or use of this product, consult
a competent technician.
INSTALLATION GUIDE
- please wear gloves during the installation
- Please remove the corrugated board before installation
Assembly Instructions
- Slide the adapter’s hemmed edges onto the fan housing flanges (see fig.1 and fig.2)
- Pinch the grille springs on the sides of the grille assembly
- Position the grille into the housing with the grille springs in the appropriate slots of the Damper Assembly
- Push the grille assembly towards the ceiling to secure it (see fig.3)
ORTECH reserves the right to modify at any time, without notice, any or all of our product’s features, designs, components and specifications to meet market changes.
13376 Comber Way
Surrey BC V3W 5V9
info@ortechindustries.com
www.ortechindustries.ca
205 Summerlea Rd
Brampton, ON L6T 4E5
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>