SENCORE SDC 7600Qi Digital Alarm Clock With Quick Wireless Charger User Manual

SENCORE SDC 7600Qi Digital Alarm Clock With Quick Wireless Charger

SAFETY INFORMATION

• We strongly recommend that you read this “User’s Guide” and keep it on a safe place.
• Do not subject this device to excessive force, shock, dust, temperature or humidity.
• Do not cover the ventilation openings with objects such as newspapers, curtains, etc.
• Do not immerse this device in water. If you spill liquid on it, dry it immediately with a soft cloth without fluff.
• Do not clean the device with abrasive or corrosive materials.
• Do not damage the internal components of the device. This would void the warranty.
• Use only new batteries. Do not mix old batteries with new ones.
• Use only accessories/accessories specified by the manufacturer.
• The images shown in this manual may differ from the actual appearance.
• When disposing of this product, ensure that it is handed over for special disposal.
• Dispose of discarded batteries according to the instructions.
• This product is intended for use only with the supplied adapter.
• WARNING! There is a risk of explosion if the battery is replaced with the wrong type.
• Batteries must not be exposed to high or low extreme temperatures and low airflow when using, storing or transporting at high altitudes. In case of non-compliance following this instruction may result in an explosion or leakage of flammable liquid or gas.
• Disposing of the battery by throwing it into a fire, placing it in a hot oven or mechanical crushing, etc cutting the battery may cause an explosion.
• Do not swallow the battery, there is a danger of chemical burns.
• Keep new and old batteries out of the reach of children.
• If it is not possible to safely close the battery compartment, stop using the product and keep it out of reach of children.
• If you suspect that the battery has been swallowed or that the battery has entered any part body, seek immediate medical attention.
• The main socket must be located near the device and must be easily accessible.
• It is forbidden to reproduce the contents of this manual without the consent of the manufacturer.
• The technical data and contents of the user manual of this product are subject to change without prior notice.
• If it is necessary to use spare parts, make sure that the service technician uses spare parts intended for by the manufacturer, which have the same characteristics as the original parts. Unauthorized replacements may cause fire, electric shock or other hazard.
• This product is not a toy. Keep it out of the reach of children.

Please read this manual carefully and thoroughly to familiarize yourself with the functions as well as possible. and features of your new alarm clock. This device requires power from a 9 VI2 A mains adapter. When connected to mains power, the device automatically switches to standby mode. To permanently disconnect the device from the mains supply, pull out the mains adapter from the mains socket. Warning: Before using this device, check that the local mains power supply meets the requirements of this device device. Do not connect or disconnect the adapter with wet hands. If you are not going to use the device for a long time (e.g. during vacation), disconnect the adapter from the main socket. DC (direct current) battery for clock backup: Connect two 1.5V AAA batteries (not included accessories) to the battery terminals in the BATTERY COMPARTMENT. They help maintain proper function hours in the event of a mains power failure. During a power outage, the time will not be displayed on the display, but the clock will still keep ticking right time. Wireless charging: Place your smartphone with wireless charging support on WIRELESS CHARGER. After about a second, the wireless charging icon will light up. If this icon does not light up, adjust the position of your smartphone so that its charging coil is aligned with WIRELESS CHARGER.

• If there is any metal object lying on the wireless charger and it is not a device with wireless charging, the wireless charging icon will flash.
• DO NOT use in high temperature, humidity or corrosive environments.
• DO NOT place the wireless charger too close to magnetic strips or tip cards.
• Do not place this alarm clock close to magnetic cards (ID cards, bank cards, etc.) with magnetic strips or chips to prevent damage to the card.
• Using the USB charging output: The USB 5V/2A charging port is widely used to charge other mobile devices.
• USB charging supplies a maximum of 1-2 A current to mobile devices, depending on the specific specifications of mobile devices.
• SAFETY PRECAUTIONS: For the diho device to function reliably, do not expose it to extreme temperatures or high humidity.
• For example, never place it in or near bathing areas stoves or radiators.If the device does not work properly, please take it to the nearest service centre. Don’t try to repair it yourself. To prevent fire or electric shock, do not expose the device to rain or moisture.
• To avoid electric shock, do not open the cover of the device. Always ask for a fix qualified service technician. Keep out of reach of children. Ensure that children are kept a safe distance from this alarm clock.
• Please keep between this wireless charger and medical implants (cardiostimulators, cochlear implants, etc.) a distance of at least 20 cm to avoid damage to medical devices.
• Before cleaning this alarm clock, ensure that the power source is disconnected. Always use sparingly to clean roll up a soft cloth. Do not use cleaning preparations or cleaning agents with abrasive effects. Operating temperature: 0-40 °C. Operating humidity: 20-85%.

DEVICE DESCRIPTION

1. Display
2. Mobile phone wireless charging area (Qi standard)
3. Connector for connecting the power adapter (DC 9 V)
4. USB-A for charging a mobile device (5 V/2 A)
5. Alarm set button (ALARM SET)
6. TIME SET button
7. The button clicks up
8. The whistle buttoned down
9. Display brightness adjustment/alarm snooze button
10. Alarm clock speaker
11. Battery compartment (2 x 1.5 V; AAA)

DISPLAY DESCRIPTION

1. morning (AM)
2. Afternoon (PM)
3. Snooze alarm clock
4. -si bia s N- deadlock | TUE – Tuesday | WED – Wednesday | THR – strok I FRI – salary / SAT
5. Hours
6. Minutes
7. Alarm clock 1 (AL1)
8. Alarm clock 2 (AL2)
9. Wireless charging

COMMISSIONING

• Read the safety instructions before using and starting the alarm clock with wireless charging for the first time in this manual.
• Connect the AC/DC power adapter first to the alarm clock and then to the 100-240 V 50/60 Hz network. Wake-up switches to standby mode – the display lights up.
• Warning: the alarm clock/power adapter may, depending on the load (phone charging, lighting display, etc.) make beeping sounds.

BACKUP BATTERY

• Insert 2 AAA 1.5 V batteries into the alarm clock at the bottom, which are used to back up the time.
• Finish it the polarity of the battery and the displayed polarity of the contacts according to the picture from the outside of the battery compartment.
• Do not use rechargeable batteries. Check the batteries several times a year as needed. If the batteries show damage to the packaging or signs of electrolyte leakage, replace them.

WIRELESS CHARGING
The alarm clock enables the charging function of Qi mobile phones that support wireless charging. First of all check if your phone supports wireless charging and find out your exact location charging coil. Then place the phone in the location of the charging coil as accurately as possible in the area wireless charging on the alarm clock. The charging process will be indicated on the display in the lower right corner with the icon c. 9 in the picture “description of the display”. At the same time, the mobile phone should indicate the charging process. If there is sudden heating during charging, the charging process will end. Pick up the phone from the charging area and return it after cooling to complete the charging process.
Wireless charging ICON

• No light – not placed No phone/charging completed
• On – The charging process is in progress
• Blinking – Unauthorized device placed (phone does not support wireless charging)

Notice
Do not have any equipment around the induction coil that could be magnetically affected, for example, magnetic cards, watches, etc. During wireless charging, there is natural heating like a phone, as well as the alarm clock itself. Heating up the phone can significantly shorten the phone’s battery life. On some mobile devices, the indication may not correctly display the status of the completed wireless charging.

USB – A CHARGING PORT
There is a USB-A port on the back of the alarm clock, which serves to power/charge various devices with parameters from 5 V/2 A. Connect the device to be charged or powered by the USB port to the port.
Notice
We do not recommend having a device permanently connected to the port, always after charging/powering is finished remove your device from the charging port.

DISPLAY INTENSITY SETTING

• In the basic state, press the red button c repeatedly. 9 (device description) to change the intensity of lighting. The alarm clock offers 5 lighting intensity options and the option to turn off the display.

TIME AND DATE SETTING

1. Press the TIME SET button and hold it for about 1 second to enter the clock setting mode.
2. Set the year by pressing UP or DOWN and press TIME SET to confirm.
3. Set the month by pressing UP or DOWN and press TIME SET to confirm.
4. Set the day by pressing UP or DOWN and press TIME SET to confirm.
5. Select 24H or 12H by pressing UP or DOWN and press the TIME SET button to confirm.
6. Set the hour counter by pressing the UP or DOWN button and press TIME SET to confirm.
7. Set the number of minutes by pressing the UP or DOWN button and press TIME SET to confirm.
8. Confirm completion by pressing the TIME SET button.

Note
After setting the time, the display shows the current time. With one press of the TIME SET button, you can 5 seconds to display the current date.

SETTING THE ALARM CLOCK

1. Two alarm settings are available – AL1 and AL2.
2. Press and hold the ALARM SET button for about 1 second to enter the setting mode alarm clock.
3. The AL 1 icon starts flashing. Set the AL 1 alarm clock by pressing the UP button (up arrow) or DOWN, and press the ALARM SET button to confirm.
4. Set the AL 1 alarm clock minutes by pressing the UP (Up Arrow) or DOWN (Down Arrow) button, and press the ALARM SET button to confirm.
5. Selecting the alarm clock mode: Press the UP (Up arrow) or DOWN (Down arrow) button to select the option* Once/Every Day/Weekdays/Weekends and press the button ALARM SET to confirm.
6. Repeat steps 3~5 above to set the AL2 alarm
7. After the setting is completed, alarm clocks AL1 and AL2 are activated. Both the AL1 and AL2 icon will light up. Select the required alarm mode by pressing the ALARM SET button repeatedly. After disabling the function alarm icon AL1 or AL2 goes out.

SPECIFICATION

• Wireless fast charger: Qi 5W~10W
• Output power of the wireless charger: 10 W (max.)
• Supported devices: Products conforming to the Qi standard
• Charging efficiency: 70%
• Charging distance’: ≤ 8 mm
• Frequency: 110 – 205 kHz
• USB charger: 5 V/2 A (USB-A)
• USB output power: 10 W (max.)
• Power adapter: DC 9 VI2 A (included in the package)
• Energy consumption: 18 W (max.)
• Backup battery: 2× 1.5 V type AAA (batteries are not part of the package)
• Package contents: power adapter, digital alarm clock, user manual
• Dimensions: 165 × 92 × 72 mm (w/w/h)
• Weight: 355 g (without adapter)

CHARGING ADAPTER

• Manufacturer’s name or trademark, business registration number and address: Dongguan Jiayi Electric Co., Ltd., No. 356, Flower West Road, Libeiling Village, Dalang Town, Dongguan, 523773, Guangdong, P.R. Cina
• Model identification mark: JY18-090-200
• Input voltage: AC 100 – 240V
• Input frequency: 50/60 Hz
• Output voltage: DC 9.0V
• Output current: 2.0 A
• Output power: 18.0 W
• Average efficiency in active mode : 85, 16%
• Efficiency at low draft (10%): 80.09 %
• Power consumption in no-load state: ≤ 0.08 W

INSTRUCTIONS AND INFORMATION FOR THE DISPOSAL OF DISPOSED PACKAGING MATERIALS
Hand over the packaging material to a collection yard for disposal.
DISPOSAL OF DISCONTINUED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol placed on the product, accessory or packaging warns that the product must not be treated as normal household waste. dispose of please this product in a collection yard designated for the recycling of electrical and electronic equipment furnished. In some states of the European Union or in some European countries you can return your products to a local when purchasing an equivalent new product to the seller. By properly disposing of this product, you are helping to protect valuable natural resources and prevent possible negative impacts on the environment and human health, which could occur as a result of improper waste disposal. More details you will be provided by the local authorities or the nearest collection yard for waste disposal. Incorrect disposal of this type of waste may be subject to a fine by law.

For companies in the European Union
If you need to dispose of electrical or electronic equipment, ask you sales or the supplier for the necessary information.
Disposal in countries outside the European Union
If you want to dispose of this product, ask for the necessary information about the correct one method of disposal by local authorities or your dealer This product meets EU requirements.

• The company FAST CR, a. s., declares that the SDC 7600 Qi radio device complies with the directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address:  www.sencor.cz.
• Text, design and technical data are subject to change without prior notice and we reserve the right to do so
• the right to make these changes.
• The original version is in the Estonian language.
• Manufacturer’s address: FAST CR, a.s., U Sanitasu 1621, Ricany 251 01, Czech Republic
• Distributor: FAST PLUS a.s., VIcie hrdlo 324/90, 821 07 Bratislava, phone: 249 105 890
• Service center: FAST PLUS, a.s., Na pantoch 18, Bratislava 831 06, Slovakia; phone: 02 49 1058 53-54

Warranty conditions

The warranty card is not part of the device package.
The seller provides the buyer with a 24-month warranty on the product from the time it is taken over by the buyer. It will be guaranteed provides further under the conditions stated below. The warranty applies only to consumer goods sold to the consumer for free home use. Rights from liability for errors (complaints) can be exercised by the buyer either at the seller from whom the product was purchased or at the authorized service listed below. The buyer is obliged to apply the complaint without undue delay, so that the error does not worsen, but no later than the end of the Zarun era. The buyer is obliged to cooperate in verifying the existence of the claimed defect. Only complete and uncontaminated due to compliance with hygiene regulations are accepted for the advertised process product. In the case of a justified complaint, the warranty period is extended by the period from the moment of application of the complaint until the moment of handing over the repaired product to the buyer, when the buyer is obliged to return the product after the repair is completed convert. The buyer is obliged to prove his right to complain (proof of purchase of the product, warranty card, proof of on putting the product into operation).

The warranty does not cover

errors for which discounts were granted; wear and tear caused by the normal use of the product; damage to the product due to unprofessional or incorrect installation, use of the product contrary to the instructions for use with valid legal regulations and generally known and customary ways of use, as a result use of the product for a purpose other than that for which it is intended; damage to the product due to neglected or improper maintenance; damage to the product caused by its pollution, accident and force majeure (natural event, fire, water ingress); product functionality errors caused by inappropriate signal quality, disruptive electromagnetic waves, etc.; mechanical damage to the fabric (e.g. broken gombik, fall); damage caused by the use of unsuitable media, voltage, consumables (batteries) or unsuitable operating conditions (e.g. high ambient temperatures, high environmental humidity, shocks); damage, modification or other intervention in the product caused by an unauthorized or unauthorized person (service) cases when the buyer does not demonstrate the validity of his rights during the claim (when and where claimed vrobok bought); cases when the data in the submitted documents differ from the data indicated on the product; cases when the advertised product does not match the product listed in the documents with which the buyer proves his right to complain (e.g. damage to the serial number or warranty seal of the device, transcribed data in documents).

CONTACT

• Distributor: FAST PLUS a.s., Vicie šilo 324/90, 821 07 Bratislava, phone: 249 105 890
• Service center: FAST PLUS, a.s., Na pantoch 18, Bratislava 831 06, Slovakia; phone: 02 49 1058 53-54
• You can find more information at www.sencor.sk.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>