T-nB HPCOLORBL Enceinte Bluetooth Speaker Instruction Manual

June 4, 2024
T-nB

ENCEINTE BLUETOOTH®
Bluetooth® speaker
Frequency Range : 2.402GHz – 2.480GHz
Maximum power: 3.64 dBmTnB HPCOLORBL Enceinte Bluetooth
Speaker

Instruction Manual

TnB HPCOLORBL Enceinte Bluetooth Speaker - fig

HPCOLORBL Enceinte Bluetooth Speaker

  1. ON/OFF / menu / TWS function
  2. Decrease volume / Previous track
  3. Play / Pause – TWS
  4. Increase volume / Next track
  5. CD card reader
  6. Micro-USB charging port
  7. 3.5-mm jack input

OUR THANKS

Congratulations on your purchase and thank you for the trust you have placed in T’nB. Our products comply with all relevant regulations and standards. Before using this equipment, we recommend that you read the instructions and safety instructions carefully and keep this manual for future reference.

IMPORTANT SAFETY INSTRUCTIONS

  • No guarantee will apply in case of misuse.
  • T’nB accepts no liability if the safety instructions are not respected.
  • Handle the device with care.
  • The power supply of your device must match the initially specified characteristics
  • The socket of the electrical equipment must be located near the said equipment and easy to get to.
  • Keep the device away from flammable objects, explosive substances or dangerous objects.
  • Use and store your device in an environment where the temperature is between 0°C and 40°C.
  • Store your device out of the reach of children.
  • This device is not designed to be used by persons (including children) whose physical, sensory or mental capacities are reduced, or persons without experience or knowledge, except if they are supervised or receive prior instruction on using the device by a person in charge of their safety.
  • Do not disassemble your device and do not attempt to repair or modify it yourself.
  • Stop using your device if it has been hit or damaged.
  • To avoid the risk of electric shock, disconnect your device from the mains and from any other device before cleaning it or when not in use.
  • Only use the supplied accessories and connectors. The use of any other type of accessory not intended for this purpose may irremediably damage your device.
  • Make sure the appliance is switched off and cold before cleaning. Do not use any product or lubricant which may damage the appliance.
  • T’nB accepts no liability for damage caused by misuse of the product or by use of an incompatible electrical device.
  • Unless otherwise stated, never use your device in rain, in damp places, or near a water source.
  • Unless otherwise stated, this product is for indoor use only.
  • Do not leave wireless products near credit cards or other data storage devices.
  • Avoid using your wireless devices near sources of interference, such as power supply cables, microwave ovens, fluorescent lamps, wireless video cameras, and wireless domestic telephones.
  • To improve the quality and strength of the wireless signal, reduce the number of devices operating on the same wireless frequency.

Note: This speaker complies with standard IPX4, which means that it is protected from water splashes. NB: this does not mean that it can withstand being immersed in water.
Check that the silicone cover protecting the JACK and USB input sockets are tightly sealed if the speaker comes into contact with water. If the product is used incorrectly, and these conditions are not respected, there is a risk that it may be damaged.

PAIRING

Stage 1: Press and hold the (1) button for about 3 seconds to switch on the speaker. It will automatically switch to Bluetooth mode and will be ready to be connected to a device.
Stage 2: Open the Bluetooth menu of your smartphone or computer and select TNB COLOR in the list of Bluetooth devices.
Stage 3: The speaker will emit a sound, and the LED will stay blue once the pairing has been successful. If pairing fails, switch off the speaker and hold down (1) and restart the pairing process from the beginning.

BASIC FUNCTIONS

Switching the speaker on and off: Press the (1) button to switch on / off the speaker  Audio mode: Press the (1) briefly to select the desired mode between Bluetooth / 3.5 mm wire jack input / SD card / FM radio Adjusting the volume: Press and hold down the (2) or (4) button to lower or increase the volume Resetting the speaker: hold down the (1) button for 10 seconds

BLUETOOTH MODE / SD CARD / FM RADIO / 3.5 MM WIRE JACK INPUT

  1. Bluetooth mode SD card
    Press the (3) button briefly to start or pause your music.
    Press the (2) button briefly to play the previous track.
    Press the (4) button to skip to the next track.
    When you receive a call, press the (3) button briefly to pick up or hang up, or press and hold down the same button to reject the call.

  2. FM radio mode
    Press the (3) button once to switch off the sound of the speaker, and press and hold down this (3) button to search for available radio stations. The device will stop searching once all the stations have been found.
    Press the (2) button briefly to go to the previous station.
    Press the (4) button briefly to skip to the next station.

  3. Wire mode
    The speaker also has a 3.5-mm audio jack input. Just connect the 3.5-mm audio jack cable provided with the audio jack output (mobile telephone / MP3 player / PC /  laptop) to start up this mode automatically.

HOW DO I CONNECT 2 SPEAKERS TO EACH OTHER (TWS FUNCTION)?

  1. To connect both COLOR speakers to each other, turn on both speakers and hold down the (1) button for 3 seconds.
  2. Then press the same button (1) twice on one of the speakers for around 3 seconds. A tone will confirm that they are connected to each other.

FEATURES

Bluetooth 5.0
Range: 10 m
Sound power: 3W
Sound frequency range: 100 – 20.000 Hz
Integrated battery lithium-ion polymer: 3.7 V, 1200 mAh
Playtime: 8 hours (50% volume)
Charging time: 3 hours with a micro USB
Input (DC): micro USB 5V =0.5A
SD card reader up to 32 Gb max compatible with the following formats: MP3, WAV,
WMA up to 512 Kb/sec

NEED HELP?
Concerned about the satisfaction of our customers, you can contact us at info@t-nb.com. For maintenance, troubleshooting, and miscellaneous information about this product, please visit our website: www.t-nb.com

| Direct current To indicate on the rating plate that the equipment is suitable for direct current only; to identify relevant terminals.
---|---
| Prolonged listening at full volume can damage the user’s ear.

t-nb.com
Rue Nicolas Joseph Cugnot
NOTICE_HPCOLOR.indd 34
11/03/2022 17:15

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals