Satel SO-PRG MIFARE Card Programmer Installation Guide
- June 15, 2024
- Satel
Table of Contents
Satel SO-PRG MIFARE Card Programmer
Important Information
The SO-PRG programmer is used to program the MIFARE® cards (CR SOFT program required). It can also be used to read the numbers of programmed cards and write them to another program (the HID keyboard mode).
Connecting to the computer
Connect the programmer USB port with the computer USB port. Use a USB cable suitable for data transfer. The Windows operating system will automatically detect the device and install appropriate drivers. When the drivers are installed, a virtual serial COM port and a HID-compliant keyboard will be available on the computer.
After the programmer is connected to the computer, all the programmer LED indicators will be flashing for several seconds to indicate start-up.
The HID-compliant keyboard is not available when the programmer is connected with the CR SOFT program.
The declaration of conformity may be consulted at www.satel.pl/ce
Customers Support
Full manual is available on www.satel.pl. Scan the QR
code to go
to our website and download the manual.
SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND
tel. +48 58 320 94 00
www.satel.pl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>