kjell 33131 Wake Up Light Alarm Clock Instruction Manual

kjell 33131 Wake Up Light Alarm Clock

Product Information

Specifications:

• Power input: USB-C charger 18 W (9 V/2 A), sold separately
• Bed lamp power (at max): 4 W
• Color temperature: 4000 K
• Charging output: 10 W (5 V/2 A)
• Features: Alarm clock with wake-up light, USB-A port, 10 sleep sounds, 5 ringtones, sleep timer, breathing light, 3 brightness levels

Product Usage Instructions

Setting an Alarm:
To set an alarm, follow these steps:

1. Press the Alarm button (14).
2. The LED indicator (3) will light up and flash to show the set alarm time and the selected alarm.
3. Press the button again to switch between showing alarm 1 or 2.
4. Press the Up button (11) to activate the selected alarm, and use the Down button (12) to deactivate it.
5. The LED indicator will be solid when the alarm is active and turn off when it’s off.
6. To enter alarm settings, press and hold the Alarm button for 2 seconds.
7. Adjust the hour and minutes using the Up and Down buttons.
8. Set the alarm volume from V01 (lowest) to V12 (highest).
9. Select your preferred alarm sound from the available options.
10. Confirm your settings by pressing the Alarm button.

Snooze Function:
The snooze function allows you to pause the alarm sound for 10 minutes. To snooze or turn off the alarm, follow these steps:

1. When the alarm is active, press the Snooze button (10).
2. To turn off the alarm sound for the day, hold the Snooze button or snooze three times in a row.
3. The alarm will repeat the next day at the set time.
4. To turn off the bed lamp, tap the LED bed lamp ring.

Backlight Settings:
You can adjust the backlight settings by following these steps:

1. When the display shows the current time, press the Snooze button multiple times.
2. The backlight settings will cycle through brightest, medium bright, slightly dimmed, and off.

FAQ:

• Q: How do I change the alarm sound?
  A: To change the alarm sound, enter the alarm settings by holding the Alarm button for 2 seconds, then select your preferred sound using the Up and Down buttons.

• Q: Can I use my own music as an alarm sound?
  A: No, this device comes with preset sounds for alarms, and you cannot use your own music as an alarm sound.

Overview

1. LED bed lamp
2. Control panel
3. LED indicators
4. Time display
5. USB-C power input
6. USB-A output charging port
7. Speaker
8. Sleep sound on/next/off
9. Time settings
10. Snooze/pause alarm
11. Up
12. Down
13. Sleep timer
14. Alarm
15. AM/PM markers
16. Alarm markers

Specifications

• Power input: USB-C charger 18 W (9 V/2 A), sold separately
• Bed lamp power (at max): 4 W
• Color temperature: 4000 K
• Features: Alarm clock with snooze, wake-up light, 10 sleep sounds and 5 ringtones (all 15 can be used as alarm sounds), sleep timer, breathing light, 3 brightness levels, USB-A port

Charging output: 10 W (5 V/2 A)
In the box: Alarm clock with wake-up light, USB-C charging cable (1 m), manual

Use

Power on/off
Connect the included USB-C charging cable between the USB-C power input (5) and a USB charger (sold separately). The wake-up light time display (4) lights up and shows the set time.

Note!
The USB charger needs to support an output of at least 9 V/2 A (18 W). If the charger doesn’t meet the requirements, the wake-up light LED bed lamp may start to flicker during use, light up with weak light or cause the sound from the speaker to distort.

The requirements are most commonly found in chargers that are certified to charge devices using QC (quick charge) or PD (power delivery). We do not recommend using a multi-port USB charger, as connecting more devices may lower the output power of the charger. Contact the place of purchase if you’re unsure if your USB charger meets the requirements.

Setting the time

• Press and hold the Time settings button (9) for 2 seconds. The hour starts flashing. Change the value using the Up and Down buttons (11, 12). Press the button again to move on to setting the minute using the Up and Down buttons. Press the Time settings button to return to displaying the time, the wake-up light emits a chime sound to confirm the time has been set.
• Press the Time settings button when the current time is shown to change between 12/24-hour format. In the 12-hour format, the corresponding LED indicators (3) below the AM/PM markers (15) light up to show the time of day.

Alarms
The wake-up light has 2 alarms available. The corresponding LED indicators (3) light up in front of the alarm markers (16) to show which alarm is currently being set or is active. The type of sound and its volume can be set in the settings.

• Alarm 1 plays a sound when it is activated.
• Alarm 2 slowly turns on the LED bed lamp (1) 10 minutes before the set alarm, plays a sound, or can combine the two functions when it is activated.

Setting an alarm
Press the Alarm button (14), and the LED indicator (3) lights up and flashes to show the set alarm time and which alarm is currently selected. Press the button again to change between showing alarm 1 or 2. Press the Up button (11) to turn on the selected alarm, and press the Down button (12) to turn the alarm off. The LED indicator lights up with a solid light when the alarm is active, and turns off when the alarm is off.

Note! The wake-up light returns to showing the time after 5 seconds of inactivity.

Press and hold the Alarm button for 2 seconds to enter the alarm settings. The time starts flashing on the display along with the indicator for the selected alarm. Press the Up button (11) to select alarm 1, and press the Down (12) button to select alarm 2. Press the Alarm button to enter the settings for the alarm shown on the display. Hour starts flashing, change the hour using the Up and Down buttons. Press the Alarm button, and set the minutes. Press the Alarm button to confirm. Set the alarm volume using the Up and Down buttons, from “V01” (lowest) to “V12” (highest), and press the Alarm button to confirm.

Set the alarm sound using the Up and Down buttons, from 01–15 with the available built-in sounds:

1. Piano Lullaby
2. Marimba
3. Old telephone
4. Calm melody
5. Lively melody
6. Bird song
7. Ocean waves
8. Babbling brook
9. Bonfire
10. Summer night
11. Thunderstorm
12. Electric fan
13. Rain
14. Music box
15. Ticking clock

Press the Alarm button, or wait 10 seconds, to confirm and exit the alarm settings. The wake-up light emits a chime sound and returns to displaying the time.
Note! If you want alarm 2 to wake you using only the LED bed lamp, set the volume to “V00” when setting the alarm.
When the alarm is activated, the alarm sounds for 30 minutes, until it is turned off, or paused using the Snooze button (10).

Snooze

• When the alarm is activated, press the Snooze button (10) to pause the sound for 10 minutes. Press and hold the button, or snooze the alarm 3 times in a row, to turn off the alarm sound for the day. The alarm repeats again the next day at the set time.
• Tap the LED bed lamp ring to turn off the bed lamp for the day.

Backlight settings
When the display is displaying the current time, press the Snooze button multiple times to change the display backlight. The settings cycle in the following order: brightest, medium bright, slightly dimmed, and off.

Light

• Touch anywhere on the LED bed lamp (1) to manually turn on the light. Press the LED bed lamp ring multiple times to set the light to any of the 3 available light levels: slightly dimmed, medium bright and brightest. Tap the bed lamp again at the brightest setting to turn it off.
• Touch and hold your finger on the LED bed lamp ring for 2 seconds to activate the breathing light effect, press and hold again for 2 seconds to turn the effect off.

Sleep timer
Press the Sleep sound button (8) to start playing the built-in sounds, and press multiple times to change between the available sounds (listed as 06–15 under “Setting an alarm”). Press and hold the button to turn the sleep sounds off. Press the Sleep timer button (13) multiple times when a sleep sound is playing to set the sleep timer to 30/60/90 minutes. Press again after 90 to stop the sleep timer. The LED indicator (3) on the far left of the display lights up and the wake-up light emits a chime sound to confirm sleep timer is active. Use the Up and Down buttons (11, 12) to adjust the volume. Press the Sleep timer button to show the remaining time, or press it quickly again to change the timer to the next setting.

When the countdown timer reaches 0, the sounds stop.

Note!
If you enable the LED bed light before setting the sleep timer, the light is also turned off when the sleep timer countdown finishes.

Time backup
The wake-up light has a built-in backup that helps keep the time settings in case of a power outage or if the wake-up light is disconnected from power. When the power sup-ply is restored, the wake-up light resumes as if it had been connected to power during the outage. The backup lasts up to 3 hours, depending on how long the wake-up light has been connected to power before the power outage.

Troubleshooting

• The LED bed lamp flickers, the light is low, or the sound is distorted.
• The USB charger doesn’t meet the power requirements. The USB charger needs to deliver at least 9 V/2 A (18 W). The requirements are most commonly found in chargers that are certified to charge devices using QC (quick charge) or PD (power delivery).
• We do not recommend using a multi-port USB charger, as connecting more devices may lower the output power of the charger. Contact the place of purchase if you’re unsure if your USB charger meets the requirements.

Contact Information

• www.rubicson.com
• Box 50435 Malmö Sweden

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>