Moon Sport M02 Sport Handlebar Mount User Manual
- June 13, 2024
- moon sport
Table of Contents
Moon Sport M02 Sport Handlebar Mount
Read this manual carefully before installation and keep for future reference. Visit www.moon-sport.com for manual updates.
CONTENTS
- M-02 (Handlebar Mount)
- RB-28 (MOON light adopter for GoPro mount)
- M-01-J (GoPro mount joint)
- M-GA (Garmin insert)
OPTIONAL ACCESSORIES:
RB-27 (MOON light adapter for GoPro mount) M-BR (BRYTON insert)
COMPATIBILITY
- 31.BMM HANDLEBARS
- GARMIN EDGE 520, 510, 500
- WAHOO ELEMNT BOLT, ELEMNT MINI
- GOPRO-STYLE ACTION CAMERAS
- MOONLIGHT MODELS USING RB-25/ RB-26 HANDLEBAR BRACKET
WEIGHT:
45g (excluding RB-28 & M-01-J)
INSTALLATION
HANDLEBAR MOUNT
- Open the upper clamp by removing the bolt.
- Install the mount onto the handlebar.
- Close the clamp.
- Install and tighten the bolt back into the clamp.
MOONLIGHT
- Removing the bolt on GoPro mount.
- Install the RB-28 onto the GoPro mount
- Install the bolt back into the GoPro mount
- Slide the MOON light into the RB-28 until clicks into place
- Adjust the light to desire angle, then tighten the bolt.
COMPUTER
GOPRO CAMERA
- Removing the bolt on GoPro mount.
- Attach camera to the GoPro mount in desired direction.
- Tighten the bolt.
Warning
The setup procedures are serving for a bike only.
Any improper setup or installation that does not follow original design
intentions may result in damage of bike and/or personal injury.
Check and torque all bolts periodically.
WARRANTY
MOON Products are covered by a ONE YEAR LIMITED WARRANTY from the date of
purchase is free from defects in material and workmanship. This warranty does
not apply to damage due to heat, physical damage resulting from abuse,
neglect, improper repair, improper fit, or alterations of the fixture.
For more information, please contact us at cs@moon-sport.com
ONLINE WARRANTY REGISTRATION
Visit www.moon-sport.com for online warranty
registration.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>