Kjell 47978 Heated Throw Blanket Instruction Manual
- June 5, 2024
- Kjell
Table of Contents
Kjell 47978 Heated Throw Blanket
Overview
❶ Temperature display
❷ Temperature button
❸ Time button
❹ High temp. butto
❺ Time display 0 Power plug
❻ Off G Latch
❼ On G Power socket
❽ Off
❾ Power plug
❿ Latch
⓫ Power socket
Specifications
| Input voltage: | 230V |
|---|---|
| Power | 120W |
| Cleaning | Washing machine, 40 °c |
| Remote control: | 9 heat levels, 1-9 hours timer |
| Cable length: | 2 metres |
| Size | 180×130 cm |
Included
- Heating blanket
- Wired remote control with power plug
- Manual
Use
Plug in cable and blanket
The power cable must not be connected to a wall socket before assembling the
blanket.
Connect the power plug (91to the blankets power socket (11). The power
plug is connected properly when you hear it click. Connect the other side of
the cable to a wall socket.
The blanket is now ready for use.
Unplug cable and blanket
Disconnect the cable from the wall socket first. Disconnect the blanket by lifting the latch (10) and pull out the power plug (9) from the power socket (11 ).
Turn on/off
Move the power switch to On (7) to turn on the blanket. The display (1,
5) turns on.
Move the power switch up or down to Off (6, 8) to turn off the blanket.
Set temperature
Press the Temperature button (2) to set the desired temperature level. The levels are shown on the Temperature display (1) which are “L, 1, 2, 3, 4, 5, 6, 7, H”. To instantly set the highest temperature (H), press the High tempreature button (4).
Set timer
Press the Time button (3) to set a timer from 1 to 9 hours. The blanket turns off automatically when the set time has elapsed.
Overheating protection
If the blanket gets overheated the blanket will automatically turn off. When the blanket reaches a lower temperature it will automatically turn back on.
Cleaning and maintenance
Before cleaning, disconnect the power plug (9) from both the blanket power
socket (11) and the wall socket.
Place the blanket in a net bag if you are using a washing machine. Use a small
amount of detergent and choose a gentle programme with a maximum temperature
of 40 °C.
When the washing machine is finished, remove the blanket from the net bag and
hang it from a clothesline and let the blanket dry by itself. Do not use
clothespins, do not wring the blanket, do not use a dryer and do not iron the
blanket. Do not plug in the power in order to dry the blanket through its own
heating. Do not use a hairdryer or similar appliances. Never use the blanket
if it is damp or wet.
Washing advice
- Do not use a bleach
- Do not use a dryer
- Do not iron
- Do not dry clean
- Maximum temperature 40 °C, gentle cycle
Storage
Let the blanket cool before storing it. Fold it carefully and store in a clean
and dry place.
Make sure that the blanket is completely dry before storing it and do not
place other objects on top of the blanket.
Error codes
Error code P, E or C shows on the display if the blanket is not functioning
correctly.
P: The remote control connector is not fastened properly, check
connection and turn on the heating again. If the error code does not disappear
after reconnecting, the blanket may be faulty.
E: The blanket has suffered a short circuit and can no longer be used.
Contact the place of purchase.
C: The remote control is overheated. Disconnect the blanket from the wall
socket and let it to cool down before using it again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>