Kjell 48846 Rubicson Hearing Aid User Manual
- June 6, 2024
- Kjell
Table of Contents
Kjell 48846 Rubicson Hearing Aid
EUROPEAN REPRESENTATIVE
Shanghai international Holding Corp gmbh
www.rubicson.com
Box 50435. Malmo. Sweden 2019-12-30
Specifications
-
Frequency
320 -3200 Hz -
Harmonic wave distortion
<10% -
Max sound output
< 133+3dB -
Sound gain:
<37+3dB -
Input noise
<33+3 dB
Voltage
1.5 V DC -
Current
<4.5mA
Power on/off
To start the hearing aid, press the switch to N from 0. Adjust the volume with the volume wheel. It’s recommended to keep the volume at level 1 when turning on the hearing aid to not feel discomfort.
Use
Make sure the ear plug is inserted securely into the ear. If it isn’t inserted properly you might hear a whistling sound. Adjust the volume on the hearing aid with the volume wheel. 1 is the lowest setting and 4 is the highest. You can also change the size of the ear piece, three sizes are included in the package.
Battery
The hearing aid is powered by a LR48/SR48/393/LR754/SR754 battery, one is included in the package. Open the battery hatch at the bottom of the device and take note of the polarity when inserting the battery. Remove the battery if the hearing a int won’t be used for longer periods.
Safety information
Do not use the hearing aid if suffering of tympanitis or ear pyogenesis. Do not use the hearing aid at high volume for longer periods of time, there is a high risk for ear injuries. Stop using the hearing aid immediately if you feel discomfort.Exhausted batteries are to be removed and replaced by correct type of batteries. Dispose of used batteries according to the local regulations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>