LG 55UN7300PUC LED TV Owner’s Manual
- June 16, 2024
- LG
Table of Contents
55UN7300PUC LED TV
Product Information
Specifications:
-
Model: 43UN7300PUF, 43UN7300PUC, 43UN7300AUD, 43UN7300PUD,
43UN7100PUA, 43UN7000PUB, 43UN6950ZUA, 43UN6951ZUA, 49UN7300PUC,
49UN7300PUF, 49UN7300AUD, 49UN7300PUB, 49UN7100PUA, 49UN7000PUB,
50UN8050PUD, 50UN8000PUB, 50UN7300PUF, 50UN7300PUC, 50UN7300AUD,
50UN7300PUB, 50UN7000PUC, 50UN6950ZUF, 50UN6951ZUF, 55UN8050PUD,
55UN8000PUB, 55UN7300PUF, 55UN7300PUC, 55UN7300AUD, 55UN7300PUB,
55UN7310PUC, 55UN7100PUA, 55UN7000PUB, 55UN6950ZUA, 55UN6951ZUA,
60UN7300PUA, 60UN7310PUA, 60UN7000PUB, 60UN6950ZUA, 60UN6951ZUA,
65UN8500PUI, 65UN8500AUJ, 65UN8050PUD, 65UN8000PUB, 65UN7300PUF,
65UN7300PUC, 65UN7300AUD, 65UN7300PUB, 65UN7310PUC, 65UN7100PUA,
65UN6950ZUA, 65UN6951ZUA, 70UN7370PUC, 70UN7370AUD, 70UN7370PUB,
70UN7100PUA, 70UN7070PUA, 75UN8570PUC, 75UN7370PUE, 75UN8000PUB,
75UN8570AUD, 75UN7370AUH, 75UN7370PUB, 75UN7100PUD, 75UN7070PUC,
75UN6950ZUD, 75UN6951ZUD, 82UN8570PUC, 82UN8570PUB, 82UN8570AUD,
86UN8570PUC, 86UN8570PUB, 86UN8570AUD -
Screen Type: LCD with LED backlights
Product Usage Instructions
Important Safety Instructions:
Please read the following safety instructions before operating
your TV:
-
If the power cord or plug is damaged, liquid has been spilled
on the TV, objects have fallen into the TV, the TV does not operate
normally, or the TV has been dropped, do not use it and contact
customer service immediately. -
Do not open the TV. There are no user-serviceable parts inside.
Refer to qualified service personnel for any repairs. -
Do not expose the TV to rain or moisture to reduce the risk of
fire and electric shock. -
In case of an emergency, the power plug must remain readily
accessible as it acts as the disconnecting device.
Remote Control Buttons:
- A (Arrow Key / Right Key)
- < (Arrow Key / Left Key)
- Power
- Mute
- Input
- SLEEP
- TV, TV/RAD
- – (Number Key 0 – 9)
- Q.View / Flashback
- FAV (Favorite Channel)
- Text (Teletext)
- T. Opt (Teletext Option)
- Return (BACK)
- AV (Audio / Video) Mode
- Caption/Subtitle
- V (Arrow Key / Cursor Down)
- My Apps
- Menu / Settings
- OK / Enter
- Q.Menu
- List, –
- PICTURE
- SOUND
Frequently Asked Questions (FAQ):
Q: What should I do if my TV is not operating normally?
A: If your TV is not operating normally, please follow these
steps:
-
Check if the power cord is properly connected and the TV is
receiving power. -
Make sure the remote control has functioning batteries.
-
If the issue persists, refer to the troubleshooting section in
the user manual or contact customer service.
Q: Can I open the TV to perform repairs?
A: No, the TV should not be opened as there are no
user-serviceable parts inside. Please refer to qualified service
personnel for any repairs.
OWNER’S MANUAL
Safety and Reference
LED TV*
- LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.
43UN7300PUF 43UN7300PUC 43UN7300AUD 43UN7300PUD 43UN7100PUA 43UN7000PUB 43UN6950ZUA 43UN6951ZUA 49UN7300PUC 49UN7300PUF 49UN7300AUD 49UN7300PUB 49UN7100PUA 49UN7000PUB 50UN8050PUD 50UN8000PUB
50UN7300PUF 50UN7300PUC 50UN7300AUD 50UN7300PUB 50UN7000PUC 50UN6950ZUF 50UN6951ZUF 55UN8050PUD 55UN8000PUB 55UN7300PUF 55UN7300PUC 55UN7300AUD 55UN7300PUB 55UN7310PUC 55UN7100PUA 55UN7000PUB 55UN6950ZUA 55UN6951ZUA
60UN7300PUA 60UN7310PUA 60UN7000PUB 60UN6950ZUA 60UN6951ZUA 65UN8500PUI 65UN8500AUJ 65UN8050PUD 65UN8000PUB 65UN7300PUF 65UN7300PUC 65UN7300AUD 65UN7300PUB 65UN7310PUC 65UN7100PUA 65UN6950ZUA 65UN6951ZUA
70UN7370PUC 70UN7370AUD 70UN7370PUB 70UN7100PUA 70UN7070PUA 75UN8570PUC 75UN7370PUE 75UN8000PUB 75UN8570AUD 75UN7370AUH 75UN7370PUB 75UN7100PUD 75UN7070PUC 75UN6950ZUD 75UN6951ZUD
82UN8570PUC 82UN8570PUB 82UN8570AUD 86UN8570PUC 86UN8570PUB 86UN8570AUD
MFL71437832
(2004-REV01)
Copyright © 2020 LG Electronics Inc. All Rights Reserved.
ENGLISH _Index
Important Safety Instruction
· Readtheseinstructions. · Keeptheseinstructions. · Heedallwarnings. ·
Followallinstructions. · Donotusethisapparatusnearwater. ·
Cleanonlywithdrycloth. ·
Donotblockanyventilationopenings.Installinaccordancewiththemanufacturer’sinstructions.
·
Donotinstallnearanyheatsourcessuchasradiators,heatregisters,stoves,orotherapparatus(includingamplifiers)thatproduceheat.
· Donotdefeatthesafetypurposeofthepolarizedorgrounding-
typeplug.Apolarizedplughastwobladeswithonewiderthantheother.A
groundingtypeplughastwobladesandathirdgroundingprong.Thewidebladeorthethirdprongareprovidedforyoursafety.Iftheprovided
plugdoesnotfitintoyouroutlet,consultanelectricianforreplacementoftheobsoleteoutlet.
·
Protectthepowercordfrombeingwalkedonorpinchedparticularlyatplugs,conveniencereceptacles,andthepointwheretheyexitfromthe
apparatus. · Onlyuseattachments/accessoriesspecifiedbythemanufacturer. ·
Useonlywiththecart,stand,tripod,bracket,ortablespecifiedbythemanufacturer,orsoldwiththeapparatus.Whenacartisused,use
cautionwhenmovingthecart/apparatuscombinationtoavoidinjuryfromtip-over.
· Unplugthisapparatusduringlightningstormsorwhenunusedforlongperiodsoftime. ·
Referallservicingtoqualifiedservicepersonnel.Servicingisrequiredwhentheapparatushasbeendamagedinanyway
,suchaspower-supply
cordorplugisdamaged,liquidhasbeenspilledorobjectshavefallenintotheapparatus,theapparatushasbeenexposedtorainormoisture,
doesnotoperatenormally,orhasbeendropped.
Byusingthisproduct,youagreethatalldisputesbetweenyouandLGarisingoutoforrelatinginanywaytothisproduct(includingbutnot
limitedtowarrantydisputes)shallberesolvedexclusivelythroughbindingarbitrationonanindividualbasis.Thetermsofthearbitration
agreement(includingdetailsontheprocedureforresolvingdisputes)isavailableatwww.lg.com/us/arbitration(USA)orwww.lg.com/ca_en/
arbitration(Canada). 2
ENGLISH _Index
Warning! Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION:TOREDUCETHERISKOFELECTRICSHOCKDONOT
REMOVECOVER(ORBACK).NOUSERSERVICEABLEPARTSINSIDE.
REFERTOQUALIFIEDSERVICEPERSONNEL.
Thesymbolisintendedtoalerttheusertothepresenceof
uninsulateddangerousvoltagewithintheproduct’s
enclosurethatmaybeofsufficientmagnitudetoconstitutearisk
ofelectricshocktopersons. Thesymbolisintendedtoalerttheusertothepresenceof
importantoperatingandmaintenance(servicing)
instructionsintheliteratureaccompanyingthedevice.
WARNING:TOREDUCETHERISKOFFIREANDELECTRICSHOCK,DO
NOTEXPOSETHISPRODUCTTORAINORMOISTURE.
· TOPREVENTTHESPREADOFFIRE,KEEPCANDLESOROTHERITEMS
WITHOPENFLAMESAWAYFROMTHISPRODUCTATALLTIMES.
· Do not place the TV and/or remote control in the following environments: –
Keeptheproductawayfromdirectsunlight. – Anareawithhighhumiditysuchasabathroom
– Nearanyheatsourcesuchasstovesandotherdevicesthat produceheat. –
Nearkitchencountersorhumidifierswheretheycaneasilybe exposedtosteamoroil. –
Anareaexposedtorainorwind. –
Donotexposetodrippingorsplashinganddonotplaceobjects
filledwithliquids,suchasvases,cups,etc.onoroverthe
apparatus(e.g.,onshelvesabovetheunit). –
Nearflammableobjectssuchasgasolineorcandles,orexpose
theTVtodirectairconditioning. – Donotinstallinexcessivelydustyplaces.
Otherwise,thismayresultinfire,electricshock,combustion/
explosion,malfunctionorproductdeformation.
· Ventilation – InstallyourTVwherethereisproperventilation.Donotinstallin
aconfinedspacesuchasabookcase. – Donotinstalltheproductonacarpetorcushion. –
Donotblockorcovertheproductwithclothorothermaterials whileunitispluggedin.
· Takecarenottotouchtheventilationopenings.Whenwatching
theTVforalongperiod,theventilationopeningsmaybecomehot.
· Protectthepowercordfromphysicalormechanicalabuse,suchas
beingtwisted,kinked,pinched,closedinadoor,orwalkedupon.
Payparticularattentiontoplugs,walloutlets,andthepointwhere
thecordexitsthedevice.
· DonotmovetheTVwhilstthePowercordispluggedin. ·
Donotuseadamagedorlooselyfittingpowercord. ·
Besuretograsptheplugwhenunpluggingthepowercord.Donot
pullonthepowercordtounplugtheTV. ·
DonotconnecttoomanydevicestothesameACpoweroutletas
thiscouldresultinfireorelectricshock. · Disconnecting the Device from the Main
Power
– Thepowerplugisthedisconnectingdevice.Incaseofan
emergency,thepowerplugmustremainreadilyaccessible.
· DonotletyourchildrenclimborclingontotheTV.Otherwise,the
TVmayfallover,whichmaycauseseriousinjury.
· Outdoor Antenna Grounding(Candifferbycountry): –
Ifanoutdoorantennaisinstalled,followtheprecautionsbelow.
Anoutdoorantennasystemshouldnotbelocatedinthevicinity
ofoverheadpowerlinesorotherelectriclightorpowercircuits,
orwhereitcancomeincontactwithsuchpowerlinesorcircuits
asdeathorseriousinjurycanoccur. Besuretheantennasystemisgroundedtoprovidesome
protectionagainstvoltagesurgesandbuilt-upstaticcharges.
Section810oftheNationalElectricalCode(NEC)intheU.S.A.
providesinformationwithrespecttopropergroundingofthe
mastandsupportingstructure,groundingofthelead-inwire
toanantennadischargeunit,sizeofgroundingconductors,
locationofantennadischargeunit,connectiontogrounding
electrodesandrequirementsforthegroundingelectrode.
AntennagroundingaccordingtotheNationalElectricalCode, ANSI/NFPA70
3
ENGLISH _Index
· Grounding (Exceptfordeviceswhicharenotgrounded.) – TVwithathree-
pronggroundedACplugmustbeconnectedto athree-
pronggroundedACoutlet.Ensurethatyouconnectthe
earthgroundwiretopreventpossibleelectricshock.
· Nevertouchthisapparatusorantennaduringalightningstorm. Youmaybeelectrocuted.
· MakesurethepowercordisconnectedsecurelytotheTVandwall
socketifnotsecureddamagetothePlugandsocketmayoccurand
inextremecasesafiremaybreakout.
· Donotinsertmetallicorinflammableobjectsintotheproduct.Ifa
foreignobjectisdroppedintotheproduct,unplugthepowercord
andcontactthecustomerservice.
· Donottouchtheendofthepowercordwhileitispluggedin.You maybeelectrocuted.
· If any of the following occur, unplug the product
immediately and contact your local customer service.
– Theproducthasbeendamaged. –
Ifwateroranothersubstanceenterstheproduct(likeanAC
adapter,powercord,orTV). – IfyousmellsmokeorotherodorscomingfromtheTV –
Whenlightningstormsorwhenunusedforlongperiodsoftime.
EventheTVisturnedoffbyremotecontrolorbutton,ACpower
sourceisconnectedtotheunitifnotunpluggedin. ·
DonotusehighvoltageelectricalequipmentneartheTV(e.g.,a
bugzapper).Thismayresultinproductmalfunction. ·
Donotattempttomodifythisproductinanywaywithoutwritten
authorizationfromLGElectronics.Accidentalfireorelectricshock
canoccur.Contactyourlocalcustomerserviceforserviceorrepair.
Unauthorizedmodificationcouldvoidtheuser’sauthorityto operatethisproduct. ·
Useonlyanauthorizedattachments/accessoriesapprovedby
LGElectronics.Otherwise,thismayresultinfire,electricshock,
malfunction,orproductdamage.
· NeverdisassembletheACadapterorpowercord.Thismayresultin fireorelectricshock.
· Handletheadaptercarefullytoavoiddroppingorstrikingit.An
impactcoulddamagetheadapter.
· Toreducetheriskoffireorelectricalshock,donottouchtheTV
withwethands.Ifthepowercordprongsarewetorcoveredwith
dust,drythepowerplugcompletelyorwipedustoff.
· Batteries – Storetheaccessories(battery,etc.)inasafelocationoutofthe
reachofchildren. – Donotshortcircuit,disassemble,orallowthebatteriesto
overheat.Donotdisposeofbatteriesinafire.Batteriesshould
notbeexposedtoexcessiveheat. –
Caution:Riskoffireorexplosionifthebatteryisreplacedbyan incorrecttype.
· Moving – Whenmoving,makesuretheproductisturnedoff,unplugged,
andallcableshavebeenremoved.Itmaytake2ormorepeople
tocarrylargerTVs.Donotpressorputstressonthefrontpanel
oftheTV.Otherwise,thismayresultinproductdamage,fire hazardorinjury.
· Keepthepackinganti-moisturematerialorvinylpackingoutofthe reachofchildren.
· Donotallowanimpactshock,anyobjectstofallintotheproduct,
anddonotdropanythingontothescreen.
· Donotpressstronglyuponthepanelwithahandorasharp
objectsuchasanail,pencil,orpen,ormakeascratchonit.Itmay cause damagetoscreen.
· Cleaning – Whencleaning,unplugthepowercordandwipegentlywitha
soft/drycloth.Donotspraywaterorotherliquidsdirectlyonthe
TV.DonotcleanyourTVwithchemicalsincludingglasscleaner,
anytypeofairfreshener,insecticide,lubricants,wax(car,
industrial),abrasive,thinner,benzene,alcoholetc.,whichcan
damagetheproductand/oritspanel.Otherwise,thismayresult
inelectricshockorproductdamage.
4
ENGLISH _Index
Preparing
Optional Extras
· WhentheTVisturnedonforthefirsttimeafterbeingshipped
fromthefactory,initializationoftheTVmaytakeapproximately oneminute.
· ImageshownmaydifferfromyourTV. ·
YourTV’sOSD(OnScreenDisplay)maydifferslightlyfromthat
showninthismanual. · Theavailablemenusandoptionsmaydifferfromtheinputsource
orproductmodelthatyouareusing. · NewfeaturesmaybeaddedtothisTVinthefuture. ·
Thedevicemustbeeasilyaccessedtoalocationoutletnearthe
access.Somedevicesarenotmadebyturningon/offbutton,
turningoffthedeviceandunpluggingthepowercord. ·
Theitemssuppliedwithyourproductmayvarydependingupon themodel. ·
Productspecificationsorcontentsofthismanualmaybechanged
withoutpriornoticeduetoupgradeofproductfunctions. ·
Foranoptimalconnection,HDMIcablesandUSBdevicesshould
havebezelslessthan10mm(0.39inches)thickand18mm(0.7 inches)width. ·
UseanextensioncablethatsupportsUSB2.0iftheUSBcableor
USBflashdrivedoesnotfitintoyourTV’sUSBport. ·
UseacertifiedcablewiththeHDMIlogoattached.Ifyoudonotuse
acertifiedHDMIcable,thescreenmaynotdisplayoraconnection errormayoccur. ·
RecommendedHDMIcabletypes(3m(9.84feet)orless) – UltraHighSpeedHDMIcable®/TM
B A
B *A<=10mm(0.39inches)
A
*B<=18mm(0.7inches)
Optionalextrascanbechangedormodifiedforqualityimprovement
withoutanynotification.Contactyourdealerforbuyingtheseitems.
Thesedevicesworkonlywithcertainmodels.
Themodelnameordesignmaybechangedduetothemanufacturer’s
circumstancesorpolicies.
Magic Remote Control
(Dependinguponmodel)
MR20GA CheckwhetheryourTVmodelsupportsBluetoothintheWireless
ModuleSpecificationtoverifywhetheritcanbeusedwiththeMagic Remote.
Wall Mounting Bracket
(Dependinguponmodel) MakesuretousescrewsandwallmountbracketthatmeettheVESA
standard.Standarddimensionsforthewallmountkitsaredescribedin
thefollowingtable.
A B
Model
VESA (A x B) (mm) Standard screw Number of screws Wall mount bracket
(optional)
43/50UN69 43/50UN70 43UN71 43/50UN73 50UN80* 200×200 M6 4 LSW240B MSW240
55UN69 49/55UN70 49/55UN71 49/55UN73 55UN80* 300×300 M6 4 OLW480B MSW240
5
ENGLISH _Index
Model
VESA (A x B) (mm) Standard screw Number of screws Wall mount bracket
(optional)
60/65UN69 60UN70 65UN71 60/65UN73 65UN80 65UN85 300×300 M6 4
OLW480B
75UN69 70/75UN70 70/75UN71 70/75UN73 75UN80 75/82/86UN85 600×400 M8 4
LSW640B
Lifting and moving the TV
WhenmovingorliftingtheTV,readthefollowingtopreventtheTV
frombeingscratchedordamagedandforsafetransportationregardless
ofitstypeandsize.
· ItisrecommendedtomovetheTVintheboxorpackingmaterial
thattheTVoriginallycamein.
· BeforemovingorliftingtheTV,disconnectthepowercordand allcables.
· WhenholdingtheTV,thescreenshouldfaceawayfromyouto avoiddamage.
· UseatleasttwopeopletomovealargeTV. ·
WhentransportingtheTVbyhand,holdtheTVasshowninthe
followingillustration.
· WhentransportingtheTV,donotexposetheTVtojoltsor excessivevibration.
· WhentransportingtheTV,keeptheTVupright;neverturntheTV
onitssideortilttowardstheleftorright.
· WhenhandlingtheTV,becarefulnottodamagetheprotruding buttons. ·
Avoidtouchingthescreenatalltimes,asthismayresultin damagetothescreen. ·
Donotplacetheproductonthefloorwithitsfrontfacing
downwithoutpadding.Failuretodosomayresultin damagetothescreen. ·
WhenattachingthestandtotheTVset,placethescreen
facingdownonacushionedtableorflatsurfacetoprotect thescreenfromscratches.
Mounting on the Table
· HoldthetopandbottomoftheTVframefirmly.Makesurenotto holdthetransparentpart,speaker,orspeakergrillearea.
1 LiftandtilttheTVintoitsuprightpositiononatable. · Leaveaminimumof10cm(4inches)spacefromthewallfor properventilation.
10cm
(4inches)
10cm
10cm 10cm
10cm
(Dependinguponmodel) 2 Connectthepowercordtoawalloutlet.
6
ENGLISH _Index
· Donotapplyforeignsubstances(oils,lubricants,etc.)to
thescrewpartswhenassemblingtheproduct. (Doingsomaydamagetheproduct.)
· IfyouinstalltheTVonastand,youneedtotakeactions
topreventtheproductfromoverturning.Otherwise,the
productmayfallover,whichmaycauseinjury.
· Donotuseanyunapproveditemstoensurethesafetyand productlifespan.
· Anydamageorinjuriescausedbyusingunapproveditems arenotcoveredbythewarranty.
· Makesurethatthescrewsarefastenedtightly.(Ifthey
arenotfastenedsecurelyenough,theTVmaytiltforward afterbeinginstalled.)
· Donotfastenthescrewswithexcessiveforceotherwise theymaystripandbecomeloose.
Securing TV to the Wall
Mounting to the Wall
AnoptionalwallmountcanbeusedwithyourLGTelevision.Consult
withyourlocaldealerforawallmountthatsupportstheVESA
standardusedbyyourTVmodel.Carefullyattachthewallmount
bracketattherearoftheTV.Installthewallmountbracketonasolid
wallperpendiculartothefloor.IfyouareattachingtheTVtoother
buildingmaterials,pleasecontactqualifiedpersonneltoinstallthe
wallmount.Detailedinstructionswillbeincludedwiththewallmount.
WerecommendthatyouuseanLGbrandwallmount.TheLGwall
mountiseasytoadjustortoconnectthecables.Whenyoudonotuse
LG’swallmountbracket,useawallmountbracketwherethedeviceis
adequatelysecuredtothewallwithenoughspacetoallowconnectivity toexternaldevices
.Ifyouareusinganon-adjustablemount,attachthe
mounttothewall.AttachthecablestotheTVfirst,thenattachtheTV tothemount.
(Dependinguponmodel)
1 Insertandtightentheeye-bolts,orTVbracketsandboltsontheback oftheTV. ·
Ifthereareboltsinsertedattheeye-boltsposition,removethe boltsfirst.
2 Mountthewallbracketswiththeboltstothewall.Matchthe
locationofthewallbracketandtheeye-boltsontherearoftheTV.
3 Connecttheeye-boltsandwallbracketstightlywithasturdyrope.
Makesuretokeeptheropehorizontalwiththeflatsurface. ·
Useaplatformorcabinetthatisstrongandlargeenoughto supporttheTVsecurely. ·
Brackets,boltsandropesarenotprovided.Youcanobtain
additionalaccessoriesfromyourlocaldealer.
10cm(4inches)
10cm
10cm
10cm
10cm
(Dependinguponmodel)
· RemovethestandbeforeinstallingtheTVonawall
mountbyperformingthestandattachmentinreverse.
· Formoreinformationofscrewsandwallmountbracket, refertotheSeparatepurchase.
· Ifyouintendtomounttheproducttoawall,attachVESA
standardmountinginterface(optionalparts)totheback
oftheproduct.Whenyouinstallthesettousethewall
mountingbracket(optionalparts),fixitcarefullysoas nottodrop.
· WhenmountingaTVonthewall,makesurenottoinstall
theTVbyhangingthepowerandsignalcablesonthe backoftheTV.
· Donotinstallthisproductonawallifitcouldbeexposed
tooiloroilmist.Thismaydamagetheproductandcause ittofall.
7
ENGLISH _Index
· Wheninstallingthewallmountingbracket,itisrecommendedto
coverthestandholeusingtape,inordertopreventtheinfluxof
dustandinsects,(Dependinguponmodel).
Standhole
Connections
YoucanconnectvariousexternaldevicestotheTV.Formore
informationonexternaldevice’sconnection,refertothemanual
providedwitheachdevice.
Antenna/Cable
Connectanantenna,cable,orcableboxtowatchTVwhilereferringto
thefollowing.Theillustrationsmaydifferfromtheactualitemsandan
RFcableisoptional.
· MakesurenottobendthecopperwireoftheRFcable.
Copperwire · Completeallconnectionsbetweendevices,andthenconnectthe
powercordtothepoweroutlettopreventdamagetoyourTV. ·
Useasignalsplittertouse2TVsormore. · DTVAudioSupportedCodec:MPEG,DolbyDigital
· ThisTVcannotreceiveULTRAHD(3840x2160pixels)broadcasts
directlybecausetherelatedstandardshavenotbeenconfirmed.
Other connections
ConnectyourTVtoexternaldevices.Forthebestpictureandaudio
quality,connecttheexternaldeviceandtheTVwiththeHDMIcable.
HDMI
· WhenconnectingtheHDMIcable,theproductandexternaldevices
shouldbeturnedoffandunplugged.
· HDMIAudioSupportedFormat: (Dependinguponmodel) TrueHD(48kHz),
DolbyDigital/DolbyDigitalPlus(32kHz/44.1kHz/48kHz),
PCM(32kHz/44.1kHz/48kHz/96kHz/192kHz)
· [Picture] [AdditionalSettings] [HDMIUltra HDDeepColor]
(ForUN69/UN71/UN73/UN80series) – On:Support4K@50/60Hz(4:4:4,4:2:2,4:2:0) –
Off:Support4K@50/60Hz(4:2:0) (ForUN85series) –
On:Support4K@50/60Hz(4:4:4,4:2:2,4:2:0),
<3,4portOnly>4K@100/120Hz(4:4:4,4:2:2,4:2:0) – Off:Support4K@50/60Hz(4:2:0)
IfthedeviceconnectedtoInputPortalsosupportsUltraHDDeep
Color,yourpicturemaybeclearer.However,ifthedevicedoesn’t
supportit,itmaynotworkproperly.Inthatcase,changetheTV’s
[HDMIUltraHDDeepColor]settingtooff. –
Thisfeatureisavailableonlyoncertainmodelswhichsupport HDMIUltraHDDeepColor.
External Devices
Supportedexternaldevicesare:Blu-rayplayer,HDreceivers,DVD
players,VCRs,audiosystems,USBstoragedevices,PC,gamingdevices,
andotherexternaldevices.Formoreinformationonexternaldevice’s
connection,refertothemanualprovidedwitheachdevice.
· IfyourecordaTVprogramonaBlu-ray/DVDrecorderorVCR,make
suretoconnecttheTVsignalinputcabletotheTVthroughaDVD
recorderorVCR.Formoreinformationaboutrecording,refertothe
manualprovidedwiththeconnecteddevice.
· Theexternaldeviceconnectionsshownmaydifferslightlyfrom
illustrationsinamanual.
· ConnectexternaldevicestotheTVregardlessabouttheorderof theTVport.
8
ENGLISH _Index
· IfyouconnectagamingdevicetotheTV,usethecablesupplied withthegamingdevice.
· Refertotheexternalequipment’smanualforoperating instructions.
· InPCmode,theremaybenoiseassociatedwiththeresolution,
verticalpattern,contrastorbrightness.Ifnoiseispresent,change
thePCoutputtoanotherresolution,changetherefreshrateto
anotherrateoradjustthebrightnessandcontrastonthe[Picture]
menuuntilthepictureisclear.Dependinguponthegraphicscard,
someresolutionsettingsmaynotallowtheimagetobepositioned onthescreenproperly.
· SomeUSBHubsmaynotwork.IfaUSBdeviceconnectedthrough
aUSBHubisnotdetected,connectitdirectlytotheUSBporton theTV.
· WhenconnectingviaawiredLAN,itisrecommendedtouseaCAT 7cable.
· TheTVmaybecapableofoperatingwithoutaset-top-boxfroma
multichannelvideoprogrammingdistributor(MVPD).
Using Button
YoucansimplyoperatetheTVfunctions,usingthebutton.
Basic functions
Remote RS-232C setup
ToobtaintheRS-232Cexternalcontrolsetupinformation,please
visitwww.lg.com.Downloadandreadthemanual,(Dependingupon model).
· Donotdroptheproductorletitfalloverwhenconnecting
externaldevices.Otherwise,thismayresultininjuryor damagetotheproduct.
· Whenconnectingexternaldevicessuchasvideogame
consoles,makesuretheconnectingcablesarelong
enough.Otherwise,theproductmayfallover,whichmay causeinjuryordamagetheproduct.
PowerOn(Press) PowerOff1(PressandHold) MenuControl(Press2)
MenuSelection(PressandHold3) 1 Allrunningappswillclose. 2
Youcanaccessandadjustthemenubypressingthebuttonwhen TVison. 3
Youcanusethefunctionwhenyouaccessmenucontrol.
Adjusting the menu
WhentheTVisturnedon,pressthe buttononetime.Youcanadjust
theMenuitemsusingthebutton.
Turnsthepoweroff. Changestheinputsource. Adjuststhevolumelevel.
Scrollsthroughthesavedchannels.
9
ENGLISH _Index
Using Remote Control
To use the button, press and hold for more than 1 second.
(Dependinguponmodel)
Thedescriptionsinthismanualarebasedonthebuttonsontheremote
control.PleasereadthismanualcarefullyandusetheTVcorrectly.
Toinstallbatteries,openthebatterycover,replacebatteries(1.5VAAA) matchingthe
and endstothelabelinsidethecompartment,
andclosethebatterycover.Toremovethebatteries,performthe
installationactionsinreverse.Thisremoteusesinfraredlight.Whenin
use,itshouldbepointedinthedirectionoftheTV’sremotesensor.
Makesuretopointtheremotecontroltowardtheremotecontrolsensor ontheTV.
1
1
1
(POWER)TurnstheTVonoroff. ReturnstothelastTVchannel.
(SEARCH)Checkforrecommendedcontent.(Some
recommendedservicesmaynotbeavailableinsomecountries.) Showsthesearchmode.
Activatesordeactivatesthesubtitles.
(Q. Settings)AccessestheQuickSettings. (INPUT)Changestheinputsource. Number
buttonEntersnumbers. Accessesthe[QuickHelp]. (DASH)Insertsa
betweennumberssuchas2-1and2-2.
Accessesthesavedchannelslist. (MORE
ACTIONS)Displaysmoreremotecontrolfunctions.
EditsQUICKACCESS.
– QUICKACCESSisafeaturethatallowsyoutoenteraspecifiedapp
orLiveTVdirectlybypressingandholdingthenumberbuttons. Adjuststhevolumelevel.
Accessesyourfavoritechannellist.
Displaystheprogrameventaccordingtotimescheduler.
(MUTE)Mutesallsounds.
(MUTE)Accessesthe[Accessibility]menu. Scrollsthroughthesavedchannels.
Movestothepreviousornextscreen. 1 Streaming Service
buttonsConnectstotheVideoStreaming Service. (HOME)AccessestheHomemenu.
(HOME)Showstheprevioushistory. Returnstothepreviousscreen. Clearson-
screendisplaysandreturnstolastinputviewing. Navigation
button(up/down/left/right)Scrollsthroughmenus oroptions.
(OK)Selectsmenusoroptionsandconfirmsyourinput.
Showsinformationonthecurrentprogram. EnablesSAP(SecondaryAudioProgram)Feature.
Startstorecord.(OnlyTimeMachineReadysupportedmodel)
(Control buttons)Controlbuttonsformedia contents.
, , , Theseaccessspecialfunctionsinsomemenus.
(Somebuttonsandservicesmaynotbeprovideddependingupon modelsorregions.)
10
ENGLISH _Index
Using Magic Remote Control To use the button, press and hold for more than 1 second.
(Dependinguponmodel)
Thedescriptionsinthismanualarebasedonthebuttonsontheremote
control.PleasereadthismanualcarefullyandusetheTVcorrectly.
Whenthemessage[Magicremotebatteryislow.Pleasechangethe
battery.]isdisplayed,replacethebatteries.
Toinstallbatteries,openthebatterycover,replacebatteries(1.5VAA) matchingthe
and endstothelabelinsidethecompartment,
andclosethebatterycover.Besuretopointthemagicremotetoward
theremotecontrolsensorontheTV.Toremovethebatteries,perform
theinstallationactionsinreverse.Thisremoteusesinfraredlight.When
inuse,itshouldbepointedinthedirectionoftheTV’sremotesensor.
1
1
1
(Somebuttonsandservicesmaynotbeprovideddependingupon modelsorregions.)
(POWER)TurnstheTVonoroff.
(STB POWER)Youcanturnyourset-topboxonoroffbyadding theset-
topboxtotheuniversalremotecontrolforyourTV. Number buttonsEntersnumbers.
Accessesthe[QuickHelp]. (DASH)Insertsa betweennumberssuchas2-1and2-2.
Accessesthesavedchannelslist. (MORE
ACTIONS)Displaysmoreremotecontrolfunctions.
EditsQUICKACCESS.
– QUICKACCESSisafeaturethatallowsyoutoenteraspecifiedapp
orLiveTVdirectlybypressingandholdingthenumberbuttons.
SAP(SecondaryAudioProgram)Featurecanalsobe
enabledbypressingthe button. Adjuststhevolumelevel.
(MUTE)Mutesallsounds.
(MUTE)Accessesthe[Accessibility]menu. Scrollsthroughthesavedchannels.
(Voice recognition)Networkconnectionisrequiredtousethe
voicerecognitionfunction.
Checkforrecommendedcontent.(Somerecommendedservicesmay
notbeavailableinsomecountries.)
(Voice recognition)Speakwhilepressingandholdingthe
buttontousethevoicerecognitionfeature.
(HOME)AccessestheHomemenu.
(HOME)Showstheprevioushistory.
(Q. Settings)AccessestheQuickSettings.
(Q. Settings)Displaysthe[AllSettings]menu.
Wheel (OK)PressthecenteroftheWheelbuttontoselecta
menu.Youcanchangechannelsbyusingthewheelbutton.
(up/down/left/right)Presstheup,down,leftorright
buttontoscrollthemenu.Ifyoupress buttonswhilethe
pointerisinuse,thepointerwilldisappearfromthescreenandMagic
Remotewilloperatelikeageneralremotecontrol.Todisplaythe
pointeronthescreenagain,shakeMagicRemotetotheleftandright.
(BACK)Returnstothepreviousscreen. (BACK)Clearson-
screendisplaysandreturnstolastinput viewing.
Displaystheprogrameventaccordingtotimescheduler. 1 Streaming Service
buttonsConnectstotheVideoStreaming Service.
(INPUT)Changestheinputsource.
(INPUT)Accessesthe[HomeDashboard]. , , ,
Theseaccessspecialfunctionsinsomemenus. , (Control
buttons)Controlsmediacontents.
11
ENGLISH _Index
Registering Magic Remote Control User Guide
How to register the Magic Remote Control
TousetheMagicRemote,firstpairitwithyourTV.
1 PutbatteriesintotheMagicRemoteandturntheTVon. 2
PointtheMagicRemoteatyourTVandpressthe Wheel (OK)on
theremotecontrol. * IftheTVfailstoregistertheMagicRemote,tryagainafterturning
theTVoffandbackon.
How to deregister the Magic Remote Control
Pressthe (BACK)and (HOME)buttonsatthesametime,for
fiveseconds,tounpairtheMagicRemotewithyourTV.
- Pressandholdthe buttonformorethan5secondstodisconnect andre-registertheMagicRemoteatthesametime. · Donotmixnewbatterieswitholdbatteries.Thismay causethebatteriestooverheatandleak. · Failuretomatchthecorrectpolaritiesofthebattery maycausethebatterytoburstorleak,resultinginfire, personalinjury,orambientpollution. · Thisapparatususesbatteries.Inyourcommunitythere mightberegulationsthatrequireyoutodisposeofthese batteriesproperlyduetoenvironmentalconsiderations. Pleasecontactyourlocalauthoritiesfordisposalor recyclinginformation. · Batteriesinsideorinsidetheproductshallnotbeexposed toexcessiveheatsuchassunshine,fireorthelike.
FormoreinformationaboutthisTV,readtheUSERGUIDEembeddedin theproduct.
· ToopentheUSERGUIDE [Support] [UserGuide] Troubleshooting
CannotcontroltheTVwiththeremotecontrol. ·
Checkifanythingsuchastapehasbeenplacedoverthereceiver. ·
Checkifthereisanyobstaclebetweentheproductandtheremote control. ·
Replacethebatterieswithnewfreshones.
Noimagedisplayandnosoundisproduced. · Checkiftheproductisturnedon. ·
Checkifthepowercordisconnectedtoawalloutlet. ·
Checkifthereisaprobleminthewalloutletbyconnectingother products.
TheTVturnsoffsuddenly. · Checkthepowercontrolsettings.Thepowersupplymaybe
interrupted. · Checkiftheauto-offfunctionisactivatedinthesettingsmenu. ·
IfthereisnosignalwhiletheTVison,theTVwillturnoff
automaticallyafter15minutesofinactivity.
12
ENGLISH _Index
Abnormal Display
· IftheTVfeelscoldtothetouch,theremaybeasmallflickerwhen
itisturnedon.Thisisnormal;thereisnothingwrongwithTV.
Someminutedotdefectsmaybevisibleonthescreen,appearing
astinyred,green,orbluespots.However,theyhavenoadverse
effectontheTV’sperformance.AvoidtouchingtheLCDscreenor
holdingyourfinger(s)againstitforlongperiodsoftime.Doingso
mayproducesometemporarydistortioneffectsonthescreen.
· Thispanelisanadvancedproductthatcontainsmillionsofpixels.
Inaveryfewcases,youcouldseefinedotsonthescreenwhile
you’reviewingtheTV.Thosedotsaredeactivatedpixelsanddonot
affecttheperformanceandreliabilityoftheTV.
· Displayingastillimageforaprolongedperiodoftimemaycause
animagesticking.AvoiddisplayingafixedimageontheTVscreen
foraextendedlengthoftime.
Generated Sound
· Cracking noiseAcrackingnoisethatoccurswhenwatchingor
turningofftheTVisgeneratedbyplasticthermalcontractiondue
totemperatureandhumidity.Thisnoiseiscommonforproducts
wherethermaldeformationisrequired.
· Electrical circuit humming/panel buzzingAlowlevelnoise isgeneratedfromahigh-
speedswitchingcircuit,whichsuppliesa
largeamountofcurrenttooperateaproduct.Itvariesdepending
upontheproduct.Thisgeneratedsounddoesnotaffectthe
performanceandreliabilityoftheproduct.
· Whencleaningtheproduct,becarefulnottoallowany
liquidorforeignobjectstoenterthegapbetweenthe
upper,leftorrightsideofthepanelandtheguidepanel, (Dependinguponmodel).
· Makesuretowringanyexcesswaterorcleanerfromthe cloth.
· DonotspraywaterorcleanerdirectlyontotheTVscreen. ·
Makesuretosprayjustenoughofwaterorcleanerontoa
dryclothtowipethescreen.
13
ENGLISH _Index
Specifications
Productspecificationsmaybechangedwithoutpriornoticeduetoupgradeofproductfunctions.
EstimatedyearlyenergyconsumptionindicatedontheFTClabelismeasuredinaccordancewiththeTestProceduresforTelevisionSets(USAonly).
Theactualenergyconsumptiondependsontheusageenvironment(Thecontentwatched,TVsettings,etc.).
·
Forinformationofthepowersupplyandpowerconsumption,refertothelabelattachedtotheproduct.
–
ThetypicalpowerconsumptionismeasuredinaccordancewithIEC62087oreachcountry’senergyregulations.
- Onsomemodels,thelabelisinsidetheexternaldeviceconnectionterminalcover. * Dependinguponthemodelorcountry,thetypicalpowerconsumptionmaynotbeonlabel.
(Dependinguponcountry)
Television system Program coverage
(Band) External antenna
impedance
Broadcasting Specifications ATSC/NTSC-M,64&256QAM
VHF2-13,UHF14-69,DTV2-69,CATV1-135,CADTV1-135
75
(ForUN85Series)
Wireless module (LGSBWAC92) Specifications
WirelessLAN(IEEE802.11a/b/g/n/ac)
FrequencyRange
OutputPower(Max.)
2,400to2,483.5MHz 5,150to5,725MHz 5,725to5,850MHz
18dBm 18dBm 18dBm
Bluetooth
FrequencyRange
OutputPower(Max.)
2,400to2,483.5MHz
8dBm
Asbandchannelscanvarypercountry,theusercannotchangeoradjusttheoperatingfrequency.Thisproductisconfiguredfortheregional frequencytable. Forconsiderationoftheuser,thisdeviceshouldbeinstalledandoperatedwithaminimumdistanceof20cm(7.8inches)betweenthedevice andthebody. FCCID:BEJLGSBWAC92 IC:2703H-LGSBWAC92
14
ENGLISH _Index
(ForUN71/UN73/UN80Series)
Wireless module (LGSBWAC02) Specifications
WirelessLAN(IEEE802.11a/b/g/n/ac)
FrequencyRange
OutputPower(Max.)
2,400to2,483.5MHz 5,150to5,725MHz 5,725to5,850MHz
18.5dBm 17dBm 18.5dBm
Bluetooth
FrequencyRange
OutputPower(Max.)
2,400to2,483.5MHz
8.5dBm
Asbandchannelscanvarypercountry,theusercannotchangeoradjusttheoperatingfrequency.Thisproductisconfiguredfortheregional frequencytable. Forconsiderationoftheuser,thisdeviceshouldbeinstalledandoperatedwithaminimumdistanceof20cm(7.8inches)betweenthedevice andthebody. FCCID:BEJLGSBWAC02 IC:2703H-LGSBWAC02
(ForUN69/UN70Series)
Wireless module (LGSWFAC81) Specifications
WirelessLAN(IEEE802.11a/b/g/n/ac)
FrequencyRange
OutputPower(Max.)
2,400to2,483.5MHz 5,150to5,725MHz 5,725to5,850MHz
20dBm 15dBm 14.5dBm
Asbandchannelscanvarypercountry,theusercannotchangeoradjusttheoperatingfrequency.Thisproductisconfiguredfortheregional frequencytable. Forconsiderationoftheuser,thisdeviceshouldbeinstalledandoperatedwithaminimumdistanceof20cm(7.8inches)betweenthedevice andthebody. FCCID:BEJLGSWFAC81 IC:2703H-LGSWFAC81
Operating Temperature Operating Humidity Storage Temperature Storage Humidity
Environment condition 0°Cto40°C(32°Fto104°F) Lessthan80% -20°Cto60°C(-4°Fto140°F) Lessthan85%
15
ENGLISH _Index
Open Source Software Notice Information
Regulatory
ToobtainthesourcecodeunderGPL,LGPL,MPL,andotheropensource
licenses,thatiscontainedinthisproduct,pleasevisithttp://opensource. lge.com.
Inadditiontothesourcecode,allreferredlicenseterms,warranty
disclaimersandcopyrightnoticesareavailablefordownload.
LGElectronicswillalsoprovideopensourcecodetoyouonCD-ROM
forachargecoveringthecostofperformingsuchdistribution(such
asthecostofmedia,shipping,andhandling)uponemailrequestto
opensource@lge.com.
Thisofferisvalidforaperiodofthreeyearsafterourlastshipmentof
thisproduct.Thisofferisvalidtoanyoneinreceiptofthisinformation.
Licenses
–
–
–
–
(MagicRemotesupportedmodelsonly)
16
ENGLISH _Index
(1)
(2)
(3)
(4)
NOTE TO CABLE/TV INSTALLER
(ForUSAandCanada) ThisreminderisprovidedtocalltheCATVsysteminstaller’sattentionto Article820-40oftheNationalElectricCode(U.S.A.).Thecodeprovides guidelinesforpropergroundingand,inparticular,specifiesthat thecablegroundshallbeconnectedtothegroundingsystemofthe building,asclosetothepointofthecableentryaspractical.
17
ENGLISH _Index
WARNING!
Neverplaceatelevisionsetinanunstablelocation.Atelevisionsetmay
fall,causingseriouspersonalinjuryordeath.Manyinjuries,particularly
tochildren,canbeavoidedbytakingsimpleprecautionssuchas:
· Usingcabinetsorstandsrecommendedbythemanufacturerofthe televisionset.
· Onlyusingfurniturethatcansafelysupportthetelevisionset. ·
Ensuringthetelevisionsetisnotoverhangingtheedgeofthe
supportingfurniture. · Notplacingthetelevisionsetontallfurniture(forexample,
cupboardsorbookcases)withoutanchoringboththefurnitureand
thetelevisionsettoasuitablesupport. ·
Notplacingthetelevisionsetonclothorothermaterialsthatmay
belocatedbetweenthetelevisionsetandsupportingfurniture. ·
Educatingchildrenaboutthedangersofclimbingonfurnitureto
reachthetelevisionsetoritscontrols.
Ifyourexistingtelevisionsetisbeingretainedandrelocated,thesame
considerationsasaboveshouldbeapplied.
Symbols
Referstoalternatingcurrent(AC). Referstodirectcurrent(DC).
ReferstoclassIIequipment.
Referstostand-by.
Refersto”ON”(power).
Referstodangerousvoltage.
18
ENGLISH _Index
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES
· Manufacturers, retailers and the rest of the consumer electronics industry
are committed to making home entertainment safe and enjoyable. · As you enjoy
your television, please note that all televisions new and old- must be
supported on proper stands or installed according to the manufacturer’s
recommendations. Televisions that are inappropriately situated on dressers,
bookcases, shelves, desks, speakers, chests, carts, etc., may fall over,
resulting in injury.
TUNE IN TO SAFETY
· ALWAYS follow the manufacturer’s recommendations for the safe installation
of your television. · ALWAYS read and follow all instructions for proper use
of your television. · NEVER allow children to climb on or play on the
television or the furniture on which the television is placed. · NEVER place
the television on furniture that can easily be used as steps, such as a chest
of drawers. · ALWAYS install the television where it cannot be pushed, pulled
over or knocked down. · ALWAYS route cords and cables connected to the
television so that they cannot be tripped over, pulled or grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
· ALWAYS contact your retailer about professional installation if you have any
doubts about your ability to safely mount your television. · ALWAYS use a
mount that has been recommended by the television manufacturer and has a
safety certification by an independent laboratory (such as UL, CSA, ETL). ·
ALWAYS follow all instructions supplied by the television and mount
manufacturers. · ALWAYS make sure that the wall or ceiling where you are
mounting the television is appropriate. Some mounts are not designed to be
mounted to walls and ceilings with steel studs or cinder block construction.
If you are unsure, contact a professional installer. · Televisions can be
heavy. A minimum of two people is required for a wall or ceiling mount
installation.
MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME
· Many new television buyers move their older CRT televisions into a secondary
room after the purchase of a flat-panel television. Special care should be
made in the placement of older CRT televisions. · ALWAYS place your older CRT
television on furniture that is sturdy and appropriate for its size and
weight. · NEVER place your older CRT television on a dresser where children
may be tempted to use the drawers to climb. · ALWAYS make sure your older CRT
television does not hang over the edge of your furniture.
CE.org/safety
19
Supplier`s Declaration of Conformity
Trade Name Responsible Party
Address
LG
LG Electronics USA, Inc.
1000 Sylvan Ave Englewood Cliffs, NJ 07632
Telephone
(201)266-2215
The model and serial number of the product are located on the back and on one
side of the product. Record them below in case you ever need service.
Model Serial No.
LG Customer Information Center For inquires or comments, visit www.lg.com or call;
1-800-243-0000 1-888-865-3026 1-888-542-2623
USA, Consumer User USA, Commercial User CANADA
Register your product Online! www.lg.com
OWNER’S MANUAL
EXTERNAL CONTROL DEVICE SETUP
Please read this manual carefully before operating the set and retain it for
future reference.
www.lg.com P/NO : MFL71445401 (1901-REV00)
ENEGNLGISH
2 KEY CODES
KEY CODES
· This feature is not available for all models.
Code (Hexa)
Function
00 CH +, PR +
01 CH -, PR –
02 Volume +
03 Volume –
06 > (Arrow Key / Right Key)
07 < (Arrow Key / Left Key)
08 Power
09 Mute
0B Input
0E SLEEP
0F TV, TV/RAD
10 – 19 * Number Key 0 – 9
1A Q.View / Flashback
1E FAV (Favorite Channel)
20 Text (Teletext)
21 T. Opt (Teletext Option)
28 Return (BACK)
30 AV (Audio / Video) Mode
39 Caption/Subtitle
40 (Arrow Key / Cursor Up)
41
V (Arrow Key / Cursor Down)
42 My Apps
43 Menu / Settings
44 OK / Enter
45 Q.Menu
4C List, –
4D PICTURE
52 SOUND
Note
R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button
R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button
R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button
R/C Button
R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button
Code (Hexa)
Function
53 List
5B Exit
60 PIP(AD)
61 Blue
63 Yellow
71 Green
72 Red
79 Ratio / Aspect Ratio
91 AD (Audio Description)
9E LIVE MENU
7A User Guide
7C Smart / Home
7E SIMPLINK
8E (Forward)
8F (Rewind)
AA Info
AB Program Guide
B0 (Play)
B1 (Stop / File List)
B5 RECENT
BA
(Freeze / Slow Play / Pause)
BB Soccer
BD (REC)
DC 3D
99 AutoConfig
9F App / *
9B TV / PC
Note
R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button
R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button
R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button
R/C Button
R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button
- Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel. (For South Korea, Japan, North America, Latin America except Colombia models)
ENEGNLGISH
EXTERNAL CONTROL DEVICE SETUP 3
EXTERNAL CONTROL DEVICE SETUP
· Image shown may differ from your TV.
Connect the USB to Serial(RS-232C) converter/RS-232C(Serial) input jack to an
external control device (such as a computer or an A/V control system) to
control the product’s functions externally.
Note: The type of control port on the TV can be different between model
series.
- Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB to Serial(RS-232C) converter with USB Cable
USB Type
(PC)
(TV)
USB IN
· LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008)
USB to serial(RS-232C) converter which is not made nor provided by LG.
· It can be purchased from computer stores that carry accessories for IT
support professionals.
RS-232C(Serial) With RS-232C(Serial) Cable
DE9 (D-Sub 9pin) Type · You need to purchase the RS-232C (DE9, D-Sub 9pin
female-to-female type) to RS-232C(Serial) cable
required for the connection between the PC and the TV, which is specified in
the manual.
(PC)
RS-232C IN
(CONTROL & SERVICE)
(TV)
The connection interface may differ from your TV.
ENEGNLGISH
4 EXTERNAL CONTROL DEVICE SETUP
Phone jack Type
· You need to purchase the phone-jack to RS-232 cable required for the
connection between the PC and the TV, which is specified in the manual.
- For other models, connect to the USB port. * The connection interface may differ from your TV.
SERVICE ONLY
1 3
(PC)
(TV)
2
– or
(PC)
1 3
2
RS-232C IN
(CONTROL & SERVICE)
(TV)
Customer Computer
1
5
RS-232C configurations
3-Wire Configurations(Not standard)
RXD
PC 2
TV 2 TXD
TXD 3 GND 5
1 RXD 3 GND
6
9
RS-232C (Serial port)
RXD TXD GND
OR 3 2 5
D-Sub 9
2 1 3 Phone
TXD RXD GND
Set ID For Set ID number, see “Real Data Mapping” on p.6
1. Press SETTINGS to access the main menus. 2. Press the Navigation buttons to scroll to (*General About this TV or OPTION) and press OK. 3. Press the Navigation buttons to scroll to SET ID and press OK. 4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99. 5. When you are finished, press EXIT.
- (Depending on model)
ENEGNLGISH
EXTERNAL CONTROL DEVICE SETUP 5
Communication Parameters
· Baud rate : 9600 bps (UART) · Data length : 8 bits · Parity : None
Command reference list
(Depending on model)
· Stop bit : 1 bit · Communication code : ASCII code · Use a crossed (reverse) cable.
COMMAND1
COMMAND2
DATA (Hexadecimal)
COMMAND1
COMMAND2
DATA (Hexadecimal)
01. Power* k
02. Aspect Ratio
k
03. Screen Mute
k
04. Volume Mute
k
05. Volume Control
k
06. Contrast k
07. Brightness
k
08. Color/ Colour
k
09. Tint
k
10. Sharpness
k
11. OSD Select
k
12. Remote Control Lock k Mode
13. Treble k
a
00 to 01
15. Balance k
t
16. Color
c
(p.7)
(Colour)
x
u
Temperature
17. ISM
d
(p.7)
Method (Only j
p
Plasma TV)
e
00 to 01
18. Equalizer j
v
f
00 to 64
19. Energy Saving
j
q
g
00 to 64
20. Tune Command
m
a
21. Channel m
b
h
00 to 64
(Programme)
Add/Del(Skip)
i
00 to 64
22. Key
m
c
23. Control m
g
j
00 to 64
Backlight, Control Panel
Light
k
00 to 32
24. Input
x
select (Main)
b
l
00 to 01
25. 3D (Only x 3D models)
t
26. Extended x
v
m
00 to 01
3D (Only 3D
models)
27. Auto
j
u
r
00 to 64
Configure
00 to 64 00 to 64
(p.8) (p.9) 00 to 05 (p.9) 00 to 01
Key Codes 00 to 64
(p.11) (p.11) (p.12)
(p.12)
14. Bass
k
s
00 to 64
- Note: During playing or recording media, all commands except Power (ka) and Key (mc) are not executed and treated as NG. With RS232C cable, TV can communicate “ka command” in power-on or power-off status. but with USB-to-Serial converter cable, the command works only if TV is on.
ENEGNLGISH
6 EXTERNAL CONTROL DEVICE SETUP
Transmission / Receiving Protocol
Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x)
[Command 2] : Second command to control the TV. [Set ID]
: You can adjust the [Set ID] to choose desired monitor ID number in option menu.
Adjustment range in TV is 1 to 99. If [Set ID] value is selected to `0′, every connected set
can be controlled.
- [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on
transmission/receiving protocol.
[DATA]
: To transmit command data (hexadecimal). Transmit `FF’ data to read status of command.
[Cr]
: Carriage Return – ASCII code `0x0D’
[ ]
: Space ASCII code `0x20′
OK Acknowledgement [Command2][ ][Set ID][ ][OK][Data][x] * The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.
Error Acknowledgement [Command2][ ][Set ID][ ][NG][Data][x] * The set
transmits ACK (acknowledgement) based on this format when receiving abnormal
data from non-viable functions or communication errors.
Data 00: Illegal Code
Real data mapping (Hexadecimal b Decimal)
- When you enter the [data] in hexadecimal, refer to following conversion table. * Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.
00 : Step 0 01 : Step 1 (Set ID 1) … 0A : Step 10 (Set ID 10) … 0F : Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) …
32 : Step 50 (Set ID 50) 33 : Step 51 (Set ID 51) … 63 : Step 99 (Set ID 99) … C7 : Step 199 C8 : Step 200 …
FE : Step 254 FF : Step 255 … 01 00 : Step 256 … 27 0E : Step 9998 27 0F : Step 9999 …
ENEGNLGISH
EXTERNAL CONTROL DEVICE SETUP 7
- Commands may work differently depending on model and signal.
01. Power (Command: k a) To control Power *On or Off of the set.
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
01 : *Power On
Ack [a][ ][Set ID][ ][OK/NG][Data][x] To Show TV is Power On or *Off
Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x]
- Similarly, if other functions transmit `FF’ data based on this format, Acknowledgement feedback presents status about each function.
Ack [d][ ][Set ID][ ][OK/NG][Data][x] * In case of video mute on only, TV will
display On Screen Display(OSD). But, in case of Screen mute on, TV will not
display OSD.
04. Volume Mute (Command: k e) To control volume mute on/off.
You can also adjust mute using the MUTE button on remote control. Transmission
[k][e][ ][Set ID][ ][Data][Cr] Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on) Ack [e][ ][Set ID][ ][OK/NG][Data][x]
02. Aspect Ratio (Command: k c) (Main Picture Size)
To adjust the screen format. (Main picture format) You can also adjust the
screen format using the Aspect Ratio in the Q.MENU. or PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal screen 07 : 14:9
(4:3)
(Europe, Colombia, Mid-East,
02 : Wide screen Asia except South Korea and
(16:9)
Japan)
04 : Zoom
09 : * Just Scan
05 : Zoom 2
0B : Full Wide
(Latin America
(Europe, Colombia, Mid-
except Colombia East, Asia except South
Only)
Korea and Japan)
06 : Set by Program/ 10 to 1F : Cinema Zoom 1 to 16
Original
0c : 21:9 (Depending on model)
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
- Using the PC input, you select either 16:9 or 4:3 screen aspect ratio.
- In DTV/HDMI/Component mode (high-definition), Just Scan is available.
- Full wide mode may work differently based on model and is supported for DTV fully, and ATV, AV partially.
03. Screen Mute (Command: k d) To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture
on) Video mute off
01 : Screen mute on (Picture off) 10 : Video mute on
05. Volume Control (Command: k f) To adjust volume.
You can also adjust volume with the volume buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [f][
][Set ID][ ][OK/NG][Data][x] 06. Contrast (Command: k g) To adjust screen
contrast.
You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set
ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [g][ ][Set ID][
][OK/NG][Data][x] 07. Brightness (Command: k h) To adjust screen brightness.
You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set
ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [h][ ][Set ID][
][OK/NG][Data][x]
ENEGNLGISH
8 EXTERNAL CONTROL DEVICE SETUP
08. Color/Colour (Command: k i) To adjust the screen Color(Colour).
You can also adjust colour in the PICTURE menu. Transmission [k][i][ ][Set
ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [i][ ][Set ID][
][OK/NG][Data][x] 09. Tint (Command: k j) To adjust the screen tint.
You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][
][Data][Cr] Data Red : 00 to Green : 64 Ack [j][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k) To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 32
Ack [k][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l) To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off
01 : OSD on
Ack [l][ ][Set ID][ ][OK/NG][Data][x]
12. Remote control lock mode (Command: k m) To lock the front panel controls
on the monitor and
remote control.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00 : Lock off
01 : Lock on
Ack [m][ ][Set ID][ ][OK/NG][Data][x]
- If you are not using the remote control, use this mode. When main power is off & on (plug-off and plug-in, after 20 – 30 seconds), external control lock is released.
- In the standby mode (DC off by off timer or
ka’,
mc’ command), and if key lock is on, TV will not turn on by power on key of IR & Local Key.
13. Treble (Command: k r) To adjust treble.
You can also adjust in the AUDIO menu.
Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
Ack [r][ ][Set ID][ ][OK/NG][Data][x] (Depending on model)
14. Bass (Command: k s) To adjust Bass.
You can also adjust in the AUDIO menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
Ack [s][ ][Set ID][ ][OK/NG][Data][x] (Depending on model)
15. Balance (Command: k t) To adjust balance.
You can also adjust balance in the AUDIO menu. Transmission [k][t][ ][Set ID][
][Data][Cr] Data Min : 00 to Max : 64 Ack [t][ ][Set ID][ ][OK/NG][Data][x]
16. Color(Colour) Temperature (Command: x u) To adjust colour temperature.
You can also adjust
Color(Colour) Temperature in the PICTURE menu. Transmission [x][u][ ][Set ID][
][Data][Cr] Data Min : 00 to Max : 64 Ack [u][ ][Set ID][ ][OK/NG][Data][x]
17. ISM Method (Command: j p) (Only Plasma TV) To control the ISM method. You
can also adjust
ISM Method in OPTION menu. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data
Min : 02: Orbiter
08: Normal 20: Color(Colour) Wash Ack [p][ ][Set ID][ ][OK/NG][Data][x]
ENEGNLGISH
EXTERNAL CONTROL DEVICE SETUP 9
18. Equalizer (Command : j v)
Adjust EQ of the set.
Transmission [j][v][ ][Set ID][ ][Data][Cr]
MSB
LSB
0000000 0
Frequency
Data
7 6 5 Frequency 4 3 2 1 0
Step
0 0 0 1st Band 0 0 0 0 0 0(decimal)
0 0 1 2nd Band 0 0 0 0 1 1(decimal)
0 1 0 3rd Band … … … … …
…
0 1 1 4th Band 1 0 0 1 1 19(decimal)
1 0 0 5th Band 1 0 1 0 1 20(decimal)
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
- It depends on model, and can adjust when sound mode is EQ adjustable value.
19. Energy Saving (Command: j q)
To reduce the power consumption of the TV. You can also adjust Energy Saving
in PICTURE menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr] Data 00 : Off 01 : Minimum 02 :
Medium 03 : Maximum 04 : Auto (For LCD TV / LED TV) / Intelligent sensor (For
PDP TV) 05 : Screen off
- (Depending on model)
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
20. Tune Command (Command: m a)
-
This command may work differently depending on model and signal.
· For Europe, Mid-East, Colombia, Asia except South Korea and Japan Model
Select channel to following physical number.
Transmission [m][a][ ][Set ID][ ][Data 00][ ] [Data 01][ ][Data 02][Cr] -
Analog Antenna/Cable
[Data 00][Data 01] Channel Data Data 00 : High byte channel data Data 01 : Low byte channel data
– 00 00 ~ 00 C7 (Decimal : 0 ~ 199)
Data 02 : Input Source (Analog) – 00 : Antenna TV (ATV) – 80 : Cable TV (CATV) -
Digital Antenna/Cable/Satellite
[Data 00][Data 01]: Channel Data Data 00 : High Channel data Data 01 : Low Channel data
– 00 00 ~ 27 0F (Decimal: 0 ~ 9999) Data 02 : Input Source (Digital)
– 10 : Antenna TV (DTV) – 20 : Antenna Radio (Radio) – 40 : Satellite TV (SDTV) – 50 : Satellite Radio (S-Radio) – 90 : Cable TV (CADTV) – a0 : Cable Radio (CA-Radio) -
Tune Command Examples: 1. Tune to the Analog antenna (PAL) Channel 10.
Set ID = All = 00 Data 00 & 01 = Channel Data is 10 = 00 0a Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00
2. Tune to the digital antenna (DVB-T) Channel 01. Set ID = All = 00 Data 00 & 01 = Channel Data is 1 = 00 01 Data 02 = Digital Antenna TV = 10 Result = ma 00 00 01 10
3. Tune to the satellite (DVB-S) Channel 1000. Set ID = All = 00 Data 00 & 01 = Channel Data is 1000 = 03 E8 Data 02 = Digital Satellite TV = 40 Result = ma 00 03 E8 40
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][x][a][ ][Set ID][ ][NG][Data 00][x] · For South Korea, North/Latin America except Colombia Model
To tune channel to following physical/major/minor number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01] [ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr] Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel from the Major / Minor number, the Physical number is not required when sending a command in Digital.
ENEGNLGISH
10 EXTERNAL CONTROL DEVICE SETUP
- Analog Antenna/Cable
Data 00 : Physical Channel Number – Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) – Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)
[Data 01 ~ 04]: Major/Minor Channel Number Data 01 & 02: xx (Don’t care) Data 03 & 04: xx (Don’t care) Data 05: Input Source (Analog)
– 00 : Antenna TV (ATV) – 01 : Cable TV (CATV) - Digital Antenna/Cable
Data 00 : xx (Don’t care)
[Data 01][Data 02]: Major Channel Number Data 01 : High byte Channel Data Data 02 : Low byte Channel Data
– 00 01 ~ 27 0F (Decimal: 1 ~ 9999) [Data 03][Data 04]: Minor Channel Number Data 03 : High byte Channel Data Data 04 : Low byte Channel Data
Data 05 : Input Source (Digital) – 02 : Antenna TV (DTV) Use Physical Channel Number – 06 : Cable TV (CADTV) Use Physical Channel Number – 22 : Antenna TV (DTV) Don’t Use Physical Channel Number – 26 : Cable TV (CADTV) – Don’t Use Physical Channel Number – 46 : Cable TV (CADTV) Use Physical/Major Channel Number Only (One Part Channel) – 66 : Cable TV (CADTV) Use Major Channel Number Only (One Part Channel) – 0b : Cable DTV Plus Use Physical Channel Number – 2b : Cable DTV Plus Don’t Use Physical Channel Number – 4b : Cable DTV Plus Use Physical/Major Channel Number Only (One Part Channel) – 6b : Cable DTV Plus Use Major Channel Number Only (One Part Channel)
Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0). - Tune Command Examples: 1. Tune to the Analog cable (NTSC) channel 35.
Set ID = All = 00 Data 00 = Channel Data is 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = Analog Cable TV = 01 Total = ma 00 23 00 00 00 00 01
2. Tune to the digital antenna (ATSC) channel 30-3. Set ID = All = 00 Data 00
= Don’t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 =
Minor is 3 = 00 03 Data 05 = Digital Antenna TV = 22 Total = ma 00 00 00 1E 00
03 22
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data
05] [x][a][ ][Set ID][ ][NG][Data 00][x] · For Japan Model To tune channel to
following physical/major/minor
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01] [ ][Data02][ ][Data03][
][Data04][ ][Data05][Cr] * Digital Antenna/Satellite Data 00: xx (Don’t care)
[Data 01][Data 02]: Major Channel Number Data 01: High byte Channel Data Data
02: Low byte Channel Data
– 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor/Branch Channel Number (Don’t care in Satellite)
Data 03: High byte Channel Data Data 04: Low byte Channel Data
Data 05 : Input Source (Digital/Satellite for Japan) – 02 : Antenna TV (DTV) –
42 : Antenna TV (DTV) Use Physical/Major Channel Number Only (One Part
Channel) – 62 : Antenna TV (DTV) Use Major Channel Number Only (One Part
Channel) – 07 : BS (Broadcasting Satellite) – 08 : CS1 (Communication
Satellite 1) – 09 : CS2 (Communication Satellite 2)
- Tune Command Examples: 1 Tune to the digital antenna (ISDB-T) channel 17-1.
Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 17 = 00 11 Data 03 & 04 = Minor/Branch is 1 = 00 01 Data 05 = Digital Antenna TV = 02 Total = ma 00 00 00 11 00 01 02
ENEGNLGISH
EXTERNAL CONTROL DEVICE SETUP 11
2. Tune to the BS (ISDB-BS) channel 30. Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Don’t Care = 00 00 Data 05 = Digital BS TV = 07 Total = ma 00 00 00 1E 00 00 07
- This feature is varied based on the model. Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05] [x][a][ ][Set ID][ ][NG][Data 00][x] 21. Channel(Programme) Add/Del(Skip) (Command: m b)
To skip current channel(programme) for next time. Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 00 : Del(ATSC,ISDB)/Skip(DVB) 01 : Add
Ack [b][ ][Set ID][ ][OK/NG][Data][x] * Set the saved channel status to del(ATSC, ISDB)/ skip(DVB) or add.
22. Key (Command: m c) To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code – p.2.
Ack [c][ ][Set ID][ ][OK/NG][Data][x] 23. Control Backlight (Command: m g) · For LCD TV / LED TV To control the backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x] Control Panel Light (Command: m g)
· For Plasma TV To control the panel light.
Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
24. Input select (Command: x b) (Main Picture Input)
To select input source for main picture.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data
00 : DTV
01 : CADTV
02 : Satellite DTV
10 : ATV
ISDB-BS (Japan)
03 : ISDB-CS1 (Japan)
04 : ISDB-CS2 (Japan)
11 : CATV
20 : AV or AV1
21 : AV2
40 : Component1 60 : RGB
41 : Component2
90 : HDMI1 92 : HDMI3
91 : HDMI2 93 : HDMI4
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
- This function depends on model and signal.
25. 3D(Command: x t) (only 3D models) (Depending on model)
To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] [ ][Data 02][ ][Data
03][Cr] (Depending on model) Data Structure [Data 00] 00 : 3D On
01 : 3D Off 02 : 3D to 2D 03 : 2D to 3D [Data 01] 00 : Top and Bottom 01 :
Side by Side 02 : Check Board 03 : Frame Sequential 04 : Column interleaving
05 : Row interleaving [Data 02] 00 : Right to Left 01 : Left to Right [Data
03] 3D Effect(3D Depth): Min : 00 – Max : 14 (transmit by Hexadecimal code)
ENEGNLGISH
12 EXTERNAL CONTROL DEVICE SETUP
- [Data 02], [Data 03] functions depend on model and signal.
- If [Data 00] is 00 (3D On), [Data 03] has no meaning.
- If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data 01], [Data 02] and [Data 03] have no meaning.
- If [Data 00] is 03 (2D to 3D), [Data 01] and [Data 02] have no meaning.
- If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data 03] works when 3D Mode (Genre) is manual only.
- All 3D pattern options ([Data 01]) may not be available according to broadcasting/video signal.
[Data 00] 00 01 02 03 [Data 01] O X X X
X : don’t care
[Data 02] O X X O [Data 03] O X X O
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] [Data03][x] [t][ ][Set ID][ ][NG][Data00][x]
26. Extended 3D(Command: x v) (only 3D models) (Depending on model)
To change 3D option for TV.
Transmission [x][v][ ][Set ID][ ][Data 00][ ] [Data 01][Cr] [Data 00] 3D
option 00 : 3D Picture Correction 01 : 3D Depth (3D Mode is Manual Only) 02 :
3D Viewpoint 06 : 3D Color Correction 07 : 3D Sound Zooming 08 : Normal Image
View 09 : 3D Mode (Genre)
[Data 01] It has own range for each 3D option determined by [Data 00].
-
When [Data 00] is 00 00 : Right to Left 01 : Left to Right
-
When [Data 00] is 01, 02 Data Min: 0 – Max: 14 (transmit by Hexadecimal
code) Data value range(0 – 20) converts Viewpoint range (-10 – +10) automatically (Depending on model) This option works when 3D Mode (Genre) is manual
only. -
When [Data 00] is 06, 07 00 : Off 01 : On
-
When [Data 00] is 08 00 : Revert to 3D video from 3D-to-2D converted 2D video 01 : Change 3D video to 2D video, except 2D-to-3D video
- If conversion condition doesn’t meet, command is treated as NG.
- When [Data 00] is 09
00 : Standard 02 : Cinema 04 : Manual
01 : Sport 03 : Extreme 05 : Auto
Ack [v][ ][Set ID][ ][OK][Data00][Data01][x] [v][ ][Set ID][ ][NG][Data00][x]
27. Auto Configure (Command: j u) (Depending on model)
To adjust picture position and minimize image shaking automatically. It works
only in RGB (PC) mode.
Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set Auto Configure
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
References
- LG Electronics & Home Appliances | Shop Now | LG USA
- Manual-Hub.com - Free PDF manuals!
- LG Electronics & Home Appliances | Shop Now | LG USA
- Consumer & Home Electronics from LG | LG CA
- Arbitration | LG USA
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>