Soundcore A3130 Portable Bluetooth Speaker User Manual
- June 1, 2024
- Soundcore
Table of Contents
Soundcore A3130 Portable Bluetooth Speaker
Specifications
- DC power input
- Battery capacity
- Audio output power
- Charging time
- Playtime (varies by volume level and music content)
Product Usage Instructions
Charging
Use a certified USB-C cable and charger to prevent any damage. Fully charge
this speaker before the first use to prolong the lifespan of the built-in
battery.
Powering On / Off
- Power On: Press the power button once for steady white light. The speaker will automatically power off after 20 minutes if no device is connected.
- Power Off: Press and hold the power button for at least 2 seconds until the light turns off.
Using Your Speaker
- Bluetooth Mode: Press once for flashing blue light to enter Bluetooth pairing mode. Enjoy music through your Bluetooth-enabled devices.
TWS (True Wireless Stereo) Mode
Pair two identical Motion X600 speakers for stereo sound. Connect one
speaker with your device, then press and hold the Bluetooth button on both
speakers for at least 2 seconds to enter TWS pairing mode.
Spatial Sound
- Turn Spatial Sound On/Off: Press once for steady white light to turn spatial sound on or off.
AUX Mode
Insert a 3.5mm AUX cable (not included) to play audio on an external
device. Control audio playback via the connected device when in AUX mode.
Button Controls
Various functions can be performed with different button presses, including
power on/off, Bluetooth pairing, TWS pairing, spatial sound control, BassUp
activation, volume control, playback control, and call handling.
App
For additional features and settings, use the soundcore app available from
respective app stores.
Frequently Asked Questions (FAQ)
-
Q: How do I reset the speaker?
A: Press and hold the Bluetooth button and volume up button simultaneously for at least 4 seconds to reset the speaker. -
Q: What is LDAC and how can I experience it?
A: LDAC is a codec for high-quality audio. To experience LDAC, use devices powered by Android 8.0 or later, open the soundcore app, go to Settings, click on Sound Mode, and select Preferred audio quality to switch to LDAC codec.
At a Glance
- Power
- Bluetooth
- Spatial Sound
- BassUp
- Volume Down
- Play / Pause
- Volume Up
- USB-C Charging Input
- AUX IN
Charging
- Use a certified USB-C cable and charger to prevent any damage.
- Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.
Powering On / Off
This speaker will power off automatically after 20 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled
devices
- To re-enter Bluetooth pairing mode, press the Bluetooth button once.
- This speaker can only play music on one mobile device at a time. To play from another connected device, pause the device that’s currently active first.
- Each time you power on your speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.
TWS (True Wireless Stereo) Mode
Two identical Motion X600 speakers can pair with each other for stereo sound. Both speakers can play the same audio (one as the left channel and the other as the right channel).
- Connect either speaker with your Bluetooth device.
- On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode
To exit TWS mode, press and hold the Bluetooth button for at least 2 seconds.
Spatial Sound
Spatial sound places sound all around you to create an immersive listening experience
LDAC
Use devices powered by Android 8.0 or later to experience LDAC-quality sound.
- Open the soundcore app.
- Go to the Settings icon on the home page.
- Click on “Sound Mode.”
- Select “Preferred audio quality” to switch to LDAC codec.
- It takes about 10 seconds to switch audio codecs. You may be requested to update the speaker’s firmware if available.
- LDAC provides higher-quality sound, increases power consumption, and reduces playtime.
- Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
AUX Mode
Insert a 3.5mm AUX cable (not included) to play audio on an external
device.
When using AUX mode, control audio playback via the connected device.
Button Controls
Reset
Press and hold the Bluetooth button and volume up button simultaneously for at
least 4 seconds to reset the speaker.
App
- Download the soundcore app to enhance your experience.
- Product information: Check the product name and software version, or read the user manual.
- Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker to the app.
- Battery status: Indicates the remaining battery level of your speaker.
- Volume control: Adjust the volume level via the app without pressing the buttons on the speaker.
- EQ settings: There are 6 EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.
- soundcore Signature: Standard EQ mode optimized for well-balanced sound.
- Voice: Voices stand out more clearly from other ambient sounds.
- Treble Boost: High frequencies are enhanced.
- Balance: No enhancement for high-frequency and low-frequency sounds.
- Custom: Customize the EQ setting to suit you in the app.
- BassUp: Turn on BassUp to enhance the low-frequency sound.
- Set auto-power off time: Set an auto-power off time (5 / 10 / 20 / 60 minutes, 20 minutes by default). The speaker will automatically power off when the time is up. Voice prompt: Mute or restore the voice prompt while powering on / off.
Specifications
Specifications are subject to change without notice
| DC power input | 5V 3A |
|---|---|
| Battery capacity | 6400mAh / 7.2V |
| Audio output power | 50W |
| Charging time | 6 hours |
| Playtime (varies by volume level and music content) | 12 hours |
| Waterproof level | IPX7 |
| Bluetooth version | 5.3 |
| Bluetooth range | 100m / 328ft |