kjell 23977 Bluetooth transceiver User Manual

Kjell 23977 Bluetooth transceiver

Overview

1. Display
2. Volume+
3. Next track
4. Volume
5. Power/play/pause/ answer/hang up
6. TX/RX/previous track
7. AUX port

Specifications

• Bluetooth version:
  5.1 (10 m range)

• Codecs:
  HFP, A2DP, AVRCP, AAC, SBC

• Charging time:
  Up to 3 hrs

• Working time:
  Up to 6 hrs (max. volume)

• Power input:
  5V DC, 500 mA

• Wireless frequency:
  2402 MHz-2480 MHz

• Transmission power:
  20 mW(max)

Power
Connect the included Micro-USB cable to the power input and a USB adapter to charge the transceiver.
Change mode
Press and hold the TX/RX button (6) for 3 seconds to change between transmitter and receiver mode. The chosen mode appears on the display as TX (transmitter) or RX (receiver).

Use as a transmitter (TX)

1. Connect the transceiver to your audio source with the included AUX cable. Make sure to connect the transceiver to the AUX port of your source.
2. Press and hold the Power button (5) to turn the transceiver on. Make sure it is in TX mode. The transceiver enters pairing mode automatically.
3. Power on your headphones or speaker and activate pairing mode.
4. The transceiver searches for devices nearby. A prompt shows on the display when the pairing is successful.
   To pair with a previously paired device, press and hold the TX/ RX button (6) while the transceiver is paired. A list of previously paired devices is displayed. Use the Next track/Mode buttons (3, 6) to navigate the list and confirm your choice with the Power button.
   Note! You cannot control music or calls with the transceiver in TX mode.

Use as a receiver (RX)

1. Connect the transceiver to your music system with the included audio cable. Connect the transceiver to the AUX port.
2. Press and hold the Power button (5) to turn the transceiver on. Make sure it is in RX mode. The transceiver enters pairing mode automatically.
3. Go to the Bluetooth settings on your Bluetooth device and pair to “BTA-10”. A prompt shows on the display when the pairing is successful.
4. Adjust the volume, change track, play or pause the music or control calls with the buttons on the transceiver.

Safety information

• The transceiver contains a rechargeable Li-ion battery that cannot be replaced.
• Do not disassemble the transceiver.
• Simplified EU Declaration of Conformity
• Kjell & Company hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of the
• EU declaration of conformity is available at www.kjell.com/23977

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>