Kjell 20563 Stabilizing Selfie Stick User Manual
- June 8, 2024
- Kjell
Table of Contents
Kjell 20563 Stabilizing Selfie Stick User Manual
OVERVIEW
Specifications
- Length: 195-716 mm
- Holder size: 60-120 mm
- Weight: 286 g (incl. remote)
- Battery time: Up to 4 h
- Charging time: Approx. 2 h
- Input, stabiliser: DC 5 V/1 A
- Input, remote: DC 5 V/1 A
- Remote distance: Approx. 10 m
- Wireless frequency: 2402-2480 MHz
- Transmission power: 20 mW (max)
Remote control
The remote control is stored on the selfie stick. Pull out the bottom of the remote control to take it off from the selfie stick. Put it back on by fixing the top of the remote into the holder and gently press the bottom of the remote in place.
Charging
Connect a Micro-USB cable to the remote control and a USB power adapter to charge the remote control. The power port is located on the bottom of the remote. The power indicator turns red when the battery level is low, and turns off when the remote is fully charged.
Bluetooth pairing
Connect the remote to your smartphone with Bluetooth. Press and hold the shutter button on the remote for 2 seconds until the indicator flashes green. Open the Bluetooth settings on your phone. Look for “Linocell selfie” and connect. The indicator turns steady green when the pairing is successful. Press and hold the shutter button for 2 seconds again to disconnect the remote.
The buttons
Press the shutter button to take a photo.
Press the rotation button to rotate the the stabiliser. The stabiliser turns
from portrait to landscape photography.
Stabiliser and selfie stick
Charging
Connect a Micro-USB cable to the stabiliser and a USB power adapter to charge the stabiliser. The power port is located on the side of the stabiliser. The indicator next to the power button flashes red when the battery level is low, and turns off when the stabiliser is fully charged.
Use
- Press and hold the power button on the stabiliser for 5 seconds to turn it on.
- Screw the stabiliser onto the selife stick.
- Place your phone in the phone holder and adjust the length and angle of the selfie stick.
- Pull the stabiliser upwards until you hear a click to unlock it. Now you can easily switch from portrait mode to landscape mode.
Press the shutter button on the remote control to take a picture. Press the rotation button to rotate the stabiliser. You can also rotate the stabiliser manually by pushing the phone holder approximately 45° to the left or right and hold it there for 2 seconds. The stabiliser then continues to rotate until it hits 90°.
Note! If the remote control disconnects from the stabiliser, it needs to be paired again. Turn off the stabiliser and remote. Turn on the stabiliser again. Press and hold the rotation button and the shutter button on the remote. The stabiliser and remote pairs again and the indicator on the stabiliser turns green for 5 seconds.
Tripod
The selfie stick can be used as both a selfie stick and a tripod. Fold out the tripod legs and adjust the length of the aluminium pole by pulling it up.
Safety Information
The product contains a rechargeabale Li-ion battery that cannot be replaced. Do not try to open or disassebly the product.
www.Iinocell.com
Box 50435 MaImb Sweden
2020-01-10