Kjell 47984 Heating Pad User Manual
- June 5, 2024
- Kjell
Table of Contents
Kjell 47984 Heating Pad
Specifications
Use
Place the heating pad on a bed or sofa. Make sure the heating pad is not wrinkled or folded. Connect the remote control to the heating pad. Connect the power plug to a wall socket. Press and hold the On/off button for 3 seconds to start the heating pad. The remote control emits 3 buzzing noises to confirm the pad is turned on. Press the TEMP button until the heating level is set to 6 and wait 10 minutes for the heating pad to heat up. When it is warm, adjust the temperature by pressing the TEMP button multiple times. The heating pad will turn off automatically after 90 minutes. Press and hold the On/off button for 3 seconds to turn off the heating pad manually. Remove the power plug from the wall socket when not using the heating pad.
Washing advice
- Disconnect and remove the remote control before washing
- Do not bleach
- Do not iron
- Do not dry clean
- Maximum temperature 40 °C
Error codes
Error code P, E, or C shows on the display if the heating pad is not
functioning correctly.
-
P: If the remote control connector is not fastened properly, check the connection and turn on the heating again. If the error code does not disappear after reconnecting, the blanket may be faulty.
-
E: The blanket has suffered a short circuit and can no longer be used. Contact the place
of purchase. -
C: The remote control is overheated. Disconnect the blanket from the wall socket and let it cool down before using it again.
Safety information
This appliance is only intended for household use and may only be used indoors. The appliance is not intended for professional use. Avoid dirty and/or dusty environments. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Never place the appliance close to an open fire, near heat sources, or in direct sunlight. Never use the appliance in damp areas or near a sink, washstand, bathtub, shower, etc. Never touch the appliance with wet hands. Do not touch a wet wall socket, power plug, or adapter; always switch off the electrical current by turning off the relevant fuse on the central switchboard first. See to it that the wall socket, power plug, and/or adapter are completely dry before switching on the electrical current again. Fluids and/or objects must not get inside the appliance. If fluids or objects do get inside, immediately disconnect the power and let a professional workshop examine the appliance. Always handle the appliance with care. See to it that it is free from dust and dirt. Do not use grinding sponges or detergents (e.g. acetone) to clean the appliance. A soft tissue that does not lint may be used for cleaning. Be careful so that moisture or water does not get into the appliance. Never use the appliance if it or the power cord, plug, or adapter has been damaged in any way or does not work as intended.
Repairing, such as disassembling and/or reassembling the appliance, is only allowed to skilled professionals. By repairing it yourself there is a risk of electric shock and short circuit. If the power cord or adapter is damaged, it must be replaced by the manufacturer, technician, or another qualified person. The appliance may not be used or stored in places with a risk of frost. Do not pierce and mind pointy objects. Do not use the pad folded.