neno Ivo Rotating Video Nanny User Manual

neno Ivo Rotating Video Nanny User Manual

Thank you for purchasing our Neno Ivo baby monitor.
With this device you can monitor your child’s sleep or play in another room in real time. Communication between the transmitter and receiver takes place via radio waves with a maximum distance of 500m (in open spaces). The digital connection ensures interference-free data transmission. The camera is equipped with IR LEDs that switch on automatically when light levels are insufficient. The two-way intercom allows you to talk to your child. You can also check the temperature and humidity in your child’s room at any time, thanks to the built-in sensor. The monitor has a built-in battery so you can always have it with you. Please read this user manual carefully before using the product.

CAUTION: Leave the charging cable in a safe place (position) out of the reach of the child. Failure to do so may put the child at risk of suffocation or other dangerous situations (e.g. electric shock).

BEFORE USE

The Neno Ivo baby monitor complies with all relevant EMF standards and is safe to use when used as described in the user guide.
In particular, pay attention to the following points:

1. Installation of the device must be carried out by an adult. Keep small parts away from children during installation.
2. This product is not a toy. Do not allow children to play with the device.
3. A baby monitor cannot fully replace adult supervision.
4. Do not place the camera or cables inside the cot or within reach of children. Leave a minimum distance of 1 m.
5. Keep cables out of the reach of children.
6. Do not keep the camera near water or heat sources.
7. Use only the original parts supplied with the product.
8. Do not touch the contacts of the power socket with sharp or metallic objects.
9. Do not attempt to open the device’s covers.

ATTENTION: The range of the device is affected by external factors (e.g. walls, high-voltage lines, other electrical equipment), so the actual range may be less than specified.

CONTENTS OF THE KIT

1. Monitor
2. Camera
3. Power supply x2
4. Flexible handle
5. Installation kit
6. Manual

01. PRODUCT DESCRIPTION

A. RECEIVER/MONITOR
SEE FIG. A

1. Charging indicator
2.  Zoom button
3. MENU and back button
4. Performance indicator
5. Control buttons (menu navigation/volume/brightness, camera rotation)
6. Confirmation button
7. Microphone
8. Two-way communication button
9. Lullabies
10. Antenna
11. USB-C charging port
12. Loudspeaker
13. Fold-out footplate
14. Reset button
15. Switch

B. TRANSMITTER/CAMERA
SEE FIG. B

1. Light sensor
2. Microphone
3. Reset button
4. Camera lens
5. Infrared LEDs
6. SD card slot
7. Call button
8. Loudspeaker
9. Temperature and humidity sensor
10. Power and pairing indicator
11. USB-C charging socket
12. Pairing button

02. INSTALLATION OF THE DEVICE

Before mounting the camera, check the preview to ensure that the frame fits and covers the required view.
Check for correct signal reception. If necessary, move the camera to get a better signal.

1. Connect the power supply to the camera and power source.
2. Connect the power cable to the monitor and power source, then switch on the screen. It is recommended to fully charge the battery before first use.
3. Place the camera in a convenient location. The camera can be stood, mounted on a flexible bracket or hung using the mounting kit. Disconnect the power supply before mounting and reconnect after correct installation.
4. Assembly methods:

Method 1: Place the camera on a flat, dry surface. SEE FIG.C
Method 2: The product comes with a kit with which you will mount the camera on the wall. Using screws and dowels, screw the cap onto the wall and then screw the camera onto the thread. Check that the camera is correctly fixed and will not fall out of the thread. SEE FIG.D
Method 3: A flexible bracket is included with the product, with which you mount the camera in the location of your choice. Wind the bracket and then screw the camera onto the thread. Check that the camera is correctly attached and will not fall out of the thread. SEE FIG.E

CAUTION: Ensure that the camera and power cable are mounted out of the reach of the child and do not create a hazard. Poor mounting can lead, for example, to a child being strangled by the cable.

03. SCREEN AND ICONS

SEE FIG. F

1. Date
2. Hour
3. Air humidity at the camera site
4. Temperature at the camera site
5. Night mode indicator
6. Indicator for motion detection function activated
7. Cry detection indicator on
8. Indicator showing feeding reminder activated
9. Indicator for activated or muted sounds
10. Signal strength indicator
11. Battery indicator
12. Volume indicator
13. Screen brightness indicator

04. RECEIVER MAIN MENU

SEE FIG. G
To enter the main menu, press the “MENU and return” button.

1. Camera
2. Feeding reminder
3. Event alarm
4. Temperature and humidity alarm
5. Lullabies
6. Display settings
7. Service
8. System settings

START OF CAMERA OPERATION WITH RECEIVER

05. PAIRING THE CAMERA WITH THE RECEIVER

The monitor and camera are paired with each other at the factory. They do not need to be paired with each other again unless there has been a loss of connection.
In this case, follow the instructions:

1. Press the MENU button to enter the main menu.
2. Select the “camera” icon and press “OK”.
3. Press “OK” again to start pairing.
4. You now have 30 seconds to hold down the pairing button on the camera until you hear a beep, about 3 seconds.
5. After successful pairing, the receiver will return to the home screen and display the image from the paired camera.

06. USE OF THE DEVICE

A. CAMERA HEAD CONTROL
When viewing the camera, you can rotate the head using the control buttons on the receiver within the range of head movement.

B. ZOOM
While viewing the camera, press the “Zoom” button on the monitor to zoom in on the preview image 2 or 4 times. Pressing the button again will increase the magnification and the next one will restore the initial state.

C. LULLABIES
While viewing the camera, press the “Lullabies” button on the monitor to switch them on. Pressing again will turn the melodies off.

D. TWO-WAY COMMUNICATION
While viewing the camera, press and hold the “Two-way communication” button on the monitor while speaking.

E. VOLUME SETTINGS
While viewing the camera, press the “OK” button and then use the up and down control buttons to adjust the preferred volume. The current level is displayed in the lower left corner of the receiver.

F. DISPLAY BRIGHTNESS SETTINGS
While viewing the camera, press the “OK” button and then use the left and right control buttons to adjust the preferred brightness. The current level is displayed in the lower right corner of the receiver.

G. MAIN MENU
Press the “MENU” button to enter the main menu, which contains 8 items:

• Camera
Press the “OK” button to proceed to pairing and disconnecting the camera.
If the camera is paired, you can disconnect it by holding the “OK” button for about 5 seconds.
If the camera is not connected to the receiver, press the “OK” button on the receiver and then press and hold the pairing button for 5 seconds within 30 seconds.

• Feeding reminder
Press the ‘OK’ button to access the feeding reminder option.
Use the right and left control buttons to select the reminder frequency. Once selected, press the right button until you get to the time, then set it using the down and up buttons.
After setting the time, press the “Menu and return” button to return to the Main Menu. The settings will be saved automatically.

• Event alarm
Press the ‘OK’ button to access the alarm options.
Select the sensitivity of the cry alarms using the right and left control buttons and confirm the preferred level using the ‘OK’ button.
Press the down control to select the sensitivity for motion detection and then the sensitivity level using the right and left control buttons. Confirm the level using the “OK” button.
Press the down control and then select the alarm volume using the right and left control buttons.
Confirm the level using the “OK” button
Once set, press the ‘Menu and Return’ button to return to the Main Menu.

• Temperature and humidity alarm
Press the ‘OK’ button to access the alarm options.
Select the minimum temperature using the up and down control buttons. Then press the right control button and similarly set the maximum sensitivity of the cry alarms using the right and left control buttons and confirm the preferred level using the ‘OK’ button.
Then use the control button right left to select and set the minimum and maximum humidity at the camera site analogously.
You can also select the temperature unit by confirming with the ‘OK’ button once selected. And you can also disable the alarms completely.
Once set, press the ‘Menu and Return’ button to return to the Main Menu.

• Lullabies
Press the ‘OK’ button to access the alarm options.
Use the control buttons to select the lullaby you wish to play, the possible option to repeat or loop the song, and the volume. Once selected, confirm each change with the “OK” button.

• Display settings
Press the ‘OK’ button to access the display setting options.
Use the right and left control buttons to select the screen refresh rate to reduce flicker or turn this function off. Confirm the change with the “OK” button.
Press the control down to select the time after which the receiver enters sleep mode when inactive. Confirm the change with the “OK” button.
Press the down control to select the brightness of the screen. Use the right and left control buttons to adjust the brightness and then confirm the change with the “OK” button.
Once set, press the ‘Menu and Return’ button to return to the Main Menu.

• Service
Press the ‘OK’ button to check the address of the website, where you will find contact details as well as a form to make a complaint.
Press the “Menu and Return” button to return to the Main Menu.

• System settings
Press the “OK” button to enter the system settings.
Press the “OK” button again to select the menu language. Select the language using the control arrows.
There are 8 languages to choose from: Polish, English, German, French, Czech, Spanish, Italian, Dutch. Confirm your choice by pressing the “OK” button. Then press the “Menu and back” button.
Press the control button to the right, then press the “OK” button to set the date, time and time zone.
Once the data has been set, confirm by selecting the “Save” button and pressing the “OK” button. Then press the “Menu and back” button.
Press the control button to the right and then press the “OK” button to check the model, firmware version, serial number or you can also restart the camera or reset it already. To select the restart or reset function, use the left and right control buttons to select the function and then confirm with the “OK” button. A reset requires confirmation again.
Press the control button to the right and then press the “OK” button to check the hardware version, software version, firmware version or you can also reset the receiver. To select the reset function, press the “OK” button twice and then confirm again by selecting “YES”.

START OF CAMERA OPERATION WITH TUYA APPLICATION

07. PAIRING THE CAMERA WITH THE APP

1. Download the application – SEE FIG. H
   Android/iOS: download the Tuya Smart app in the Google Play/ App Store
   H1 – download on Google Play
   H2 – download in the App Store

2. Registration and login
   Launch the app on your smartphone. Register and then log in to the account you have created.

3. Add device
   • Connect the camera to the power supply and wait until you hear an audible notification.
   • Make sure the phone is connected to the Wi-Fi network to which the device will be connected.
   • Note: a 2.4 GHz Wi-Fi network connection is required for the camera to operate correctly. The camera does not support 5 GHz networks.
   • Press the (+) symbol in the top right corner of the application interface or select “Add device”.
   • From the product categories, select “Camera and lock” and then “Wireless camera (Wi-Fi)”.
   • In the top right corner, select the camera’s network connection mode “QR code for camera” and proceed to the next step.
   • Once you have selected the connection mode, follow the instructions in the app.

4. Deletion of the device
   • On the home screen, hold down the name of any of the devices you have added. Then select one or more devices you want to delete and click the recycle bin icon.

NOTE: After pairing the camera with the application, the camera and the receiver may disconnect. In this case, the camera must be paired with the receiver again.

08. FUNCTIONS OF THE APPLICATION

1. Home screen
a. Full screen WATCH FIG. I.1
The function enables full-screen viewing.
Additional functions under this tab:

manual control of the camera head. SEE FIG. J.1

video recording – when this function is activated, video recording is started. By default, the device saves recordings in the phone gallery (Android) or app (iOS). When activated by the user, it is also possible to save recordings to the cloud. SEE FIG. J.2

communication (Speak) – depending on the selected settings, the button is responsible for one-way or two-way audio communication. For one-way communication, press the button; when two-way communication is selected in the application settings, hold down the button to communicate using the unit’s built-in speakers. SEE FIG. J.3
taking photos (Screenshot) – when selected, the camera will take and save a photo to the phone
memory or to the cloud. SEE FIG. J.4

recording quality – SD/HD, HD recommended. SEE FIG. J.5

Surround listening – press to listen to the camera’s surroundings SEE FIG. J.6

b. Taking a picture (Screenshot) SEE FIG. I.2
When selected, the camera will take and save a photo to the phone’s memory or to the cloud.

c. Communication (Speak) See FIG. I.3
Depending on the settings selected, the button is responsible for one-way or two-way audio communication.
For one-way communication, press the button; when two-way communication is selected in the application settings, hold down the button to communicate via the unit’s built-in speakers.

d. Video recording (Record) SEE FIG. I.4
When the function is activated, the recording of the video will start. By default, the device saves recordings in the phone gallery (Android) or app (iOS). Once activated by the user, it is also possible to save recordings to the cloud.

e. Vertical view FIG. I.5

f. Playback SEE FIG. I.6
This function allows you to playback recordings stored on the SD card. Use an SD card formatted in
the FAT32 file system.

g. Gallery FIG. I.7
The function allows you to view photos stored in your phone’s memory or in the cloud.

h. Theme colour SEE FIG. I.8
Changing the background colour.

i. Private mode SEE FIG. I.9
Camera preview sleep mode.

j. Night mode SEE FIG. I.10
Night mode with IR LED illumination.

k. Anti-Flicker FIG. I.11
Flicker reduction function. Set the screen refresh rate or turn it off.

l. Device Volume See FIG. I12
Set the volume.

m. Motion detection FIG. I.13
Motion detection mode. When activated and motion is detected, it sends a notification.

n. Temperature FIG. I.14
Allows the unit of temperature displayed to be changed.

o. Lullaby SEE FIG. I.15
Use this function to select the lullaby you want to play, the possible option to repeat or loop the song, as well as the volume.

p. Edit SEE FIG. I.16
Allows button management.

q. Messages SEE FIG. I.17
Information on recent notifications.

r. Direction FIG. I.18
Manual control of the camera head.

s. Features FIG. I.19
Return to the main control MENU.

09. SETTINGS

You can access the settings by clicking on the three dots icon in the top right-hand corner of the screen.

a. Device information
Information on the device owner’s account, the IP address the camera is connected to, the device ID, time zone and Wi-Fi signal strength.

b. Press to start scenes
Switch previews between other devices added to the Tuya app.

c. Hibernation
Hibernation of the camera.

d. Basic function settings
Settings: control/reverse screen/audio mode – we recommend two-way audio/Anti- flicker

e. IR night vision function

Settings for IR night-vision operation – on/off or automatic mode.

f. Alarm detection settings
Activation/deactivation of motion detection, tracking and in-app notifications.

g. Sound
Adjust the volume of the device.

h. Alarm detection settings
Motion alarm sensitivity settings/Cry alarm sensitivity settings/Alarm settings/Alarm siren

i. Phone notifications
Access to shopping on the Tuya app.

j. SMS notifications
Access to shopping on the Tuya app.

k. Offline notifications
On/off.

l. FAQ and Feedback
Questions and answers about the device. Default inactive.

m. Shared devices
Setting up the sharing of a device with other users.

n. Add voice assistant to home screen
Shortcut settings for quick access to the device interface from the phone’s home screen.
o. Device update
p. IPC computer client
q. Device reset
r. Remove device

10. CALL BUTTON

To make a call using the camera, press the ‘Call’ button on the camera for about 2 seconds and it will make the call using the Tuya app on the phone paired with the camera.

11. SPECIFICATION

Display: 5 inches
Camera and monitor input: DC 5V 1A
Input voltage for power supplies: 220-240V 50-60 Hz
Signal range: up to 500m (outdoor), up to 100m (indoor)
Monitor resolution: HD, 1280×720
Camera resolution: Full HD 1080p
Camera viewing angle: 110 °C
Camera rotation angle: 355’ horizontally, 55’ up and down
Built-in battery (monitor): 3000mAh
Memory card support: up to 128 GB, class 10 and higher
Frequency range: 2412-2472 MHz and 864-866 MHz
Night mode: up to 5m
Operating temperature: -10-50 °C
Light sensor: Yes
Temperature sensor: Yes
Humidity sensor: Yes
Maximum RF power emitted in the frequency range 2412-2472 MHz: Camera 13.22 dBm
Maximum RF power emitted in the frequency range 864-866 MHz: Camera 6.13 dBm; Monitor 5.78 dbm
Dimensions: monitor 16x8x1.6 cm, camera 8.2×8.5×11.9 cm
Weight: monitor 171g, camera 220g

12. WARRANTY CARD

The product comes with a 24-month guarantee.
Warranty conditions can be found at: https://neno.pl/gwarancja
Details, contact and service address can be found at:

KONTAKT

Specifications and contents are subject to change without notice. We apologise for any inconvenience.
KGK Trend declares that the Neno Ivo device complies with the essential requirements of Directive 2014/53/
EU. The full declaration can be found at the following link: https://neno.pl/download/DOC/deklaracja-CENeno-Ivo.pdf

The crossed out trash can symbol indicates that unusable electrical or electronic devices, its accessories (such as power supplies, cords) or components (for example batteries, if included) cannot be disposed of alongside with household waste. In order to dispose of the devices or its components (for example batteries) deliver the device to the collection point, where it will be accepted free of charge. Disposal is subject to the recast version of the WEEE Directive (2012/19/ EU) and the Directive on batteries and accumulators (2006/66 / EC).

Proper disposal of the device prevents degradation of the natural environment. Information about the collection points ot the facilities is issued by the competent local authorities. Incorrect disposal of waste is subject to penalties provided for by the law in force in the given area.

Producent:
KGK TREND Sp. z o.o.
ul. Ujastek 5b, 31-752 Kraków, Polska.
Wyprodukowano w PRC

Manufacturer:
KGK TREND Sp. z o. o.
Ujastek 5b, 31-752 Cracow, Poland.
Made in PRC

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>