CAS PW-II Portion Control Scale User Manual
- June 13, 2024
- CAS
Table of Contents
- PRECAUTIONS
- PREFACE
- NAMES AND FUNCTIONS
- DISPLAY & KEYBOARD
- OPERATIONS
- Simple Weighing Mode
- Weighing with Tare
- Changing Unit of Weight (Unit ver. only)
- Hold Function (Hold ver. only)
- How to Set Auto Power Off
- BATTERY MAINTENANCE
- ERROR MESSAGE
- SPECIFICATIONS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
**CAS PW-II Portion Control Scale User Manual
**
PRECAUTIONS
Warning
Precautions when installing the scale. To ensure that you get the most from
your scale, please follow these instruction.
Do not disassemble the scale.
When any damage or defect occurs, contact your CAS authorized dealer
immediately for proper repair.
Do not overload beyond the maximum weight limit.
Scale must be grounded to minimize electricity static.
This will minimize defect or electric shock.
Do not pull the plug by its cord when unplugging.
Damaged cord could cause electric shock or fire.
To prevent from fire occurring, Do not place or use the scale near flammable
or corrosive gas.
To reduce electric shock or incorrect reading, Do not spill water on the scale
or place itin humid condition.
Avoid placing the scale near heater or in direct sunlight.
Insert plug firmly to wall outlet to prevent electric shock.
Use proper Adapter.
Attention
Make sure to plug your scale into the proper power outlet. For maximum
performance, plug into a power outlet 30 minutes before the usage for warm up.
For consistent and accurate reading, maintain periodical check by your CAS
authorized dealer.
Avoid sudden shock to the scale.
Grab on the bottom of the scale when moving.
Keep the scale away from other electromagnetic enerating devices. This may
interfere with accurate reading.
Place the scale on firm and temperature consistent environment.
Avoid sudden shock to the scale.
Grab on the bottom of the scale when moving.
PREFACE
Thank you for purchasing CAS PW-II.
This model has been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your special departments can enjoy this high
quality reliable CAS product.
We believe that your needs will be satisfied and you will have proper
reliability.
This manual will help you with proper operation and care of the PW-II.
Please keep it handy for future reference.
NAMES AND FUNCTIONS
OVERALL VIEW
DISPLAY & KEYBOARD
HOLD Version
KEY FUNCTIONS
| KEYS | FUNCTIONS |
|---|---|
| Used to set the zero point. | |
| Used to input or cancel the weight of tare. | |
| Used to make the weight of commodity stable. This weight is average value. | |
| Used to turn on and off the scale. |
Unit Version (Option)
KEY FUNCTIONS
| KEYS | FUNCTIONS |
|---|---|
| Used to set the zero point. | |
| Used to input or cancel the weight of tare. | |
| Used to convert the unit of weight. | |
| Used to turn on and off the scale.. |
OPERATIONS
- Turn on the display by pressing key. Then, the display will show all the segments and count up “0” to “9”. You may stop this automatic counting by pressing the key.
- When you turn on the display, make sure that platter is empty. Otherwise, display will show “Err 1”, an error of initial zero range. Please refer to “ERROR MESSAGE” section for more information on page 11.
- When the weight becomes stable the display shows the stable sign ( ○ ) on.
- You may need to make it “0.000” by pressing key unless the display indicate “0.000” under the empty platter.
Simple Weighing Mode
-
Place a commodity on the platter.
-
Remove the commodity from the platter.
Weighing with Tare
- TARE means the weight of container being used for a commodity.
- TARE key function is to subtract the weight of the container from full weight loaded.
-
Place a container on the platter.
-
Press the key.
-
Place a commodity into the container, then the display will show only the weight of the commodity.
-
Remove container and commodity, then the display will show the weight of the container with “-” symbol.
-
Press the key, then display will show the “0.000”.
Changing Unit of Weight (Unit ver. only)
- Press the key in the simple weighing mode. You may select kg, lb, oz, or gram as the unit of weight.
Hold Function (Hold ver. only)
-
When the weight is unstable, press the key
-
“HOLD” will be displayed twice
-
The average weight will be displayed. The hold function will be automatically stopped after the commodity on the tray is removed or the average weight is blinked 6 times.
How to Set Auto Power Off
Auto-Power off function is to automatically power off as time is set. This function is helpful to save battery, which is not in use. The following is the setting procedure of Auto-power off.
-
When the scale is turned on press key, holding key. Then you will see the “AP-10”.(If you have set this before,display will show previous value.)
-
Press the key, then you will see the “AP-oF” (If you have set this before, display will show previous value.)
-
Press the key until the display shows the “AP-X0” that you wish to take. (Refer to TABLE 1.)
-
Press the key, and then the scale saves what you programmed and shows all the segments, counting up “0” to “9”.
TABLE 1.
| DISPLAY | FUNCTION |
|---|---|
| AP-oF | This function does not automatically power off |
| AP-10 | This function does automatically power off when the scale is not in use |
for 10 minutes
AP-30| This function does automatically power off when the scale is not in use
for 30 minutes.
AP-60| This function does automatically power off when the scale is not in use
for 60 minutes.
- “e” value may be various on capacity of product model.
Please refer to “SPECIFICATION” on page 16. For example, a product model which capacity is 2.000kg has 1g as “e” value
BATTERY MAINTENANCE
LOW BATTERY WARNING
When the battery is low the display shows the “BATT” sign. You can replace the
battery new one. If you still use the scale without replacing the battery the
scale may provide incorrect result on measurement.
※ Low Battery status.
※ Battery cut off display.
ERROR MESSAGE
| Error Message on Display | Description | Solution |
|---|---|---|
| “Err 0” | The “Err 0” occurs when scale is not stable. | Remove unstable facts. |
| “Err 1” | The “Err 1” occurs when a current zero point has shifted from the | |
| last span calibration. | Please call your CAS dealer. | |
| “Err 3” | The “Err 3” is an overload error. | Please remove the weight. |
SPECIFICATIONS
| MODEL | PW-II |
|---|---|
| Capacity / e | Dual Interval Max1/2kg e=0.5/1g |
| e=1/2g | Dual Interval Max 4/10kg e=2/5g |
| Internal Resolution | 1/60000 |
| External Resolution | 1/2000 |
| MAX Tare | -0.9995kg |
| Display | 91 x 36 [mm] / 3.6 x 1.5 [inch] 5 digits LCD |
| Symbols | STABLE, ZERO, TARE, g, Low Battery , (kg, lb, oz Only unit version) |
| Keys | ZERO, TARE, HOLD(Hold Ver.), UNIT(Unit Ver.), POWER |
| Functions | Hold(Hold Ver.), Unit Conversion(Unit Ver.) |
| Dimensions | 239(W) x 227(D) x 66(H) [mm] / 9.4(W) x 8.9(D) x 2.6(H) [inch] |
| Platter size | 222(W) x 151(D) [mm] / 8.7(W) x 5.9(D) [inch] |
| Weight | About 1.7kg / 3.8lb |
| Power | 1.5V x 6 units (AA size Battery) |
| Operation Time | Approx. 50hours (Manganese battery)/ 250hours (Alkaline at |
20°C /68°F)
Operating Temperature| -10°C ~ +40°C / 14°F ~ 104°F
Minimum Voltage Level of The Battery| About 5.5V
Option| 9V Adapter
※ Notice: Specifications are subject to change for improvement without notice.
CAS BLDG., # 440-1, SUNGNAE-DONG,
GANGDONG-GU, SEOUL, KOREA
TEL_ 82 2 2225 3500
FAX_82 2 475 4668
www.globalcas.com
Specifications are subject to change for improvement without prior notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>