hama 00014159 Bluetooth Receiver for Cars Instruction Manual

Hama 00014159 Bluetooth Receiver for Cars Instruction Manual

PRODUCT OVERVIEW

1. Multifunction button (MFB)
   Answer / Hang off
   Play / Pause
   Power on / Power off

2. Volume “+” button

3. Volume “–” button

4. Next track

5. Previous track

6. Status-LED
   

7. Micro USB port

8. Mic
   

9. Charging port for BT Receiver
   

10. max. 2.4A USB charging port
    

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Controls and displays

1. Multi-function key (Power/Play/Pause/Telephone/Pairing)
2. + button (louder)
3. – button (quieter)

4. button (next track)

5. < button (previous track)
6. Status LED
7. Micro-USB connection
8. microphone
9. Charging port for the BT receiver
10. 2 USB charging ports (max. 2.4A each).

Explanation of warning symbols and notes

Risk of electric shock

This symbol indicates a risk of electric shock from touching product parts carrying hazardous voltage.

Warning

This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note

This symbol is used to indicate additional information or important notes.

Package contents

• Bluetooth® receiver
• 12VUSB charger
• These operating instructions

Safety instructions

• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture and overheating and use it in dry environments only.
• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
• While driving a car or using sports equipment, do not allow yourself to be distracted by your product and keep an eye on the traffic situation and your surroundings.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits specified in the technical data.
• The battery is permanently installed and cannot be removed; dispose of the product as a whole in accordance with the statutory regulations.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• Do not modify the device in any way. Doing so voids the warranty.
• Use the product only for the intended purpose.
• Only use the article under moderate climatic conditions.
• Only use the article under moderate climatic conditions.
• Do not use the product in areas in which electronic products are not permitted.
• Do not incinerate the battery or the product.
• Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.
• Ensure that the product is securely mounted before every journey.
• Take care that components such as airbags, safety areas, controls, instruments, etc. and visibility are not blocked or restricted.
• As with all electrical products, this device should be kept out of the reach of children.
• Do not use the product in a damp environment and avoid splashing water.

Risk of electric shock (car)

• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the charging cable, adapter cable or power cable is damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Warning – rechargeable battery

• Only use suitable charging devices or USB connections to charge the product.
• Do not use defective chargers or USB ports and do not attempt to repair them.
• Do not overcharge the product or allow the battery to completely discharge.
• Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
• Charge regularly (at least quarterly) during periods of prolonged storage.
• Do not charge and discharge the product at the same time.

Note – 12Vline voltage

The charger is compatible with a line voltage of 12 V.

Note – car battery

With some vehicles, it can happen that power continues to be supplied even though the ignition has been switched off. You should therefore disconnect the product from the line connection when not in use to protect your car battery from being drained.

Getting started

• The Bluetooth® receiver has an integrated Li-Po rechargeable battery. Prior to initial commissioning, fully charge the Bluetooth® receiver via the supplied 12 V USB charger using the on-board electrical system.
• Insert the Bluetooth® receiver into the USB charger’s charging port (9). Then connect the USB charger to the vehicle’s 12 V socket.
• Alternatively, the device can also be charged via a micro-USB cable (not included in the extent of delivery) connected to a suitable power source (USB charger or USB port on a PC/notebook).
• The status LED lights up solid red during the charging process.
• The charging process begins and ends automatically.
• Once the charging process is complete, the status LED goes out – the battery is fully charged.

Operation

Initial connection via Bluetooth® (pairing)

Note

• Ensure your Bluetooth®-enabled device is switched on and that Bluetooth® is activated.
• For more information, please refer to the operating instructions of your device.
• Connect the Bluetooth® receiver using the 3.5 mm jack socket (or AUX) on the receiving device (e.g. on the car radio).
• Press the multi-function key (1) for 3 seconds to switch the Bluetooth® receiver on and to activate search mode (LED (6) flashes blue).
• Then activate the Bluetooth® function on your transmitting device (e.g. smartphone) and select the device “BT09”.
• The status LED (6) lights up solid blue – the device is paired and ready to use.

Note – Bluetooth® password

• Some devices requireapassword in order to connect to another Bluetooth® device.
• If your device requests a password to connect, enter the password 0000, 1234, 1111 or 8888.

Terminating the connection

• Press the multi-function key (1) for 3 seconds to terminate the connection and switch off the device.

Automatic connection

• For a further connection with the Bluetooth® receiver, you simply need to switch the device on.
  The last transmitting device is pre-set to ensure fast connectivity.

• If this does not work, establish a new connection (see Point 5.1 Initial connection via Bluetooth®).

Accepting calls

• Pressing the multi-function key (1) once allows you to accept a call.
• To end it, press the multi-function key again.
• To reject a call, press the multi-function key for around 2 seconds.

Power-saving

• • If the Bluetooth® receiver is not connected to a Bluetooth® device, it switches itself off within 10 minutes of not being used in order to protect the integrated rechargeable battery.

Charging devices

Warning – Connection of devices

• Before connecting a device, check whether it can be adequately supplied with the charger’s current delivery.
• Ensure that the output of the connected device does not exceed 20W (USB-A 12W + USB-A 8W).
• Note the instructions in your device’s operating manual.
• Unless different instructions have been expressly given in the operating instructions for the devices you are charging, proceed as follows:
• Connect your device to a USB charging port using a suitable USB cable.
• Then connect the charger to the on-board electrical system’s car socket.
• The charging process is displayed on your device.
• Disconnect the device from the charger if you wish to interrupt the charging process or when the device is fully charged.
• Then disconnect the charger from the line connection.
• When charging the rechargeable batteries in the device, note the maximum charging times for the built-in batteries.

Button functions

Device

Switch on

| Multi-function key: Long press 3 sec.
Switch off|

Multi-function key: Long press 3 sec.

Call

Accept calls

|

Multi-function key: Brief press

Reject

|

Multi-function key: Long press

Hang up

|

Multi-function key: Brief press

Music control

Increase volume

| +: brief press
Decrease volume|

–: brief press

Next track

| >: brief press

Previous track

|

<: brief press

Play/Pause|

Multi-function key: Brief press

Status LED

In operation / connected

|

Solid blue

Battery below 10%

|

Flashes red

Attempting to connect

| Flashes blue
Charging|

Solid red

Fully charged

|

Light off

Care and maintenance

Note

Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

• Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
• Ensure that no water is able to enter the product.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/ or safety notes.

Technical data

Connection

|

3.5 mm jack plug

---|---

Max. range

| 10 m
Power supply|

Integrated Li-Po 300 mAh rechargeable battery

Bluetooth® version

| 4.2
Max. operating time|

Max. 7 hours

Frequency band(s)

| 2,42 – 2,48 GHz
Maximum radio- frequency power transmitted|

Max. 4 dBm

Recycling information Note on environmental protection:

Following the implementation of European Directive 2012/19/EU and 2006/66/EU into the national legal systems, the following applies: electrical and electronic devices as well as batteries must not be disposed of with household waste.
Consumers are obliged by law to return electrical and electronic devices as well as batteries to the designated public collection points or to the point of sale at the end of their service lives. Detailed information on this topic is defined in the national laws of the respective country. This presence of the above symbol on the product, operating instructions or package indicates that the product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/batteries, you are making an important contribution to protecting our environment.

Declaration of Conformity

 Hama GmbH & Co KG hereby declares that the radio equipment type [00014159] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity can be found on the following website: www.hama.com->00014159 ->Downloads.

Service & Support

www.hama.com
+49 9091 502-0

Hama GmbH & Co KG
86652 Monheim/ Germany

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>