SCT USB3-1X2-029TM DIP Switch User Guide
- June 13, 2024
- SCT
Table of Contents
SCT USB3-1X2-029TM DIP Switch
Product Information:
The USB3-1×2-029TM is a device that allows for control input and power supply for various components such as the Logitech Rally,Logitech-Provided POE Injector Module, and optional 3rd party controllers. It comes with a USB cable (RCC-M005-1.0M) and a camera power cable (PPC-029-1.0M). The module dimensions are H: 1.07″ (27mm) x W: 3.81″ (96mm) x D: 3.58″ (90mm). The power supply required is a W PS-1230VDC with a voltage range of 100-240V and frequency range of 47-63Hz.
Product Usage Instructions
- 1. Connect the USB3-1×2-029TM to the power supply using the provided W PS-1230VDC cable.
- 2. Connect the Logitech Rally to the USB3-1×2-029TM using the RCC-M005-1.0M USB cable.
- 3. If using the Logitech-Provided POE Injector Module, connect it to the USB3-1×2-029TM.
- 4. If using an optional 3rd party controller, connect it to the USB3-1×2-029TM using the appropriate cable (e.g., RCC-M008-1.0M USB cable).
- 5. Configure DIP Switch 1 and DIP Switch 2 based on your control input preference:
- If you want Momentary Control Input, set DIP Switch 1 to On and DIP Switch 2 to Off.
- If you want Latching Control Input, set DIP Switch 2 to On.
- Connect the USB3-1×2-029TM to a laptop or room PC using the appropriate USB cable (e.g., RCC-M008-1.0M USB cable).
- Follow the specific instructions for your connected components (e.g., Logitech Rally, Logitech-Provided POE Injector Module) to ensure proper setup and usage.
INSTRUCTION
Module Dimensions
USB3-1×2™: H: 1.07” (27mm) x W: 3.81” (96mm) x D: 3.58” (90mm)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>