neno uno Electric Breast Pump User Manual

neno uno Electric Breast Pump

Dear Customer, the device Neno Due you received is an electronic breast pump. It is used to express breast milk after childbirth. Please reod the instructions before using the device.

SAFETY MEASURES

1. Do not use the breast pump during pregnancy – this can cause early delivery.
2. Do not use the device if you suffer from chronic diseases or oversensitivity that would make using the device painful to you.
3. Before each use of the device, make sure that no component is damaged. Do not use breast pump if any of its components are clearly damaged.
4. Keep the device away from children and animals.
5. For hygienic reasons, only one person should use the breast pump.
6. Keep the pumping part of the device away from water.
7. Avoid exposing the device to mechanical damage caused by, for example, dropping it.
8. Store the silicon parts of the breast pump away from hot surfaces to avoid distorting them.
9. Store only milk that has been drained using a clean and disinfected breast pump.
10. Do not clean parts of the device with abrasives.
11. Do not try to repair the breast pump yourself – this will void the warranty.
12. If the use of the device causes pain or severe discomfort, turn it off and move the breast pump away from your breast.
13. Do not clean the tube too often and make sure it is dry before use. A wet tube can damage the device.
14. Do not charge the device with a voltage higher than specified in the technical specification

FEATURES

1. Smart device:

2. 5 levels of stimulation and 9 levels of expression,

3. 2-phase pump technology: stimulation and expression,

4. 4-phase smart function: stimulation/ expression/ automatic/ memory.

5. Designed to prevent backflow of milk:
   Closed expression system ensures that the milk does not return in the pump’s circulation, keeping the food to remain fresh and prevent infection.

6. A delicate, silicone breast shield:
   Flexible, delicate breast shield is comfortable to use, reduces pressure and helps massage the breast to improve the milk flow.

7. Quiet and light:
   The breast pump is quiet and can be used discreetly anywhere. Designed for actively working mothers who need to express milk several times during the day.

8. Easy to assemble and clean:
   The breast pump has only five parts to assemble and clean, which makes it very easy to use.

9. Smart touch screen:
   The digital display screen with memory of the carried out milk expressions and the timer allows you to track the operation of the device and ensures easy usage.

10. Rechargeable battery with USB-C port:
    Powerful lithium-ion battery that supports up to 2 hours of operation. Connect the device to power using a USB cable to power the battery.

11. BPA-free:
    The breast-pump and its accessories are made out of BPA-free materials. The breast pump is compatible with most baby bottles .

ELEMENTS

1. Capx2
2. Breast shield 24 mm diameter x2
3. Connector x2
4. Suction cap x2
5. Suction bowl x2
6. Valvex2
7. Milk bottle x2
8. Bottle holder x2
9. Tubex2
10. Charging cable
11. umping device
12. Bottle teat x2

DESCRIPTION OF MODES

DESCRIPTION OF ICONS AND BUTTONS

1. Power button:
   Hold for 2 seconds to turn the breast pump on or off.

2. Mode change:
   Press the button to change the mode. The device will automatically switch from stimulation to expression mode after 2 minutes. The device can save settings and has a time counter. When you turn on the device, the settings from the previous use of the device are automatically turned on. The breast pump will automatically turn off after 30 minutes of use.

3. Suction power:
   + increases suction power; – reduction of suction power (stimulation mode: L1-LS; expression mode: L1-L9).

4. Battery status:
   Indicates the amount of battery power remaining. Charge the breast pump if the battery is low.

5. Session duration:
   Indicates how long you have been using the breast pump. The device will turn off automatically after 30 minutes of use.

6. Double/ Single Mode:
   Press the button to turn the second breast pump on or off. The display screen shows whether one or two pumps are turned on.  + increases suction power; – reduction of suction power (stimulation mode: L1-LS; expression mode: L1-L9).

BEFORE FIRST USE

1. Unscrew the bottle from the connector.
2. Pull the valve down to disconnect it from the connector.
3. Take the breast shield cap off and pull the breast shield out of the connector.
4. Take the suction cap and suction bowl out of the connector .

CLEANING

Cleaning and sanitizing are two different activities. They must be done separately to protect your child and ensure that the breast pump works properly. Cleaning – washing the surface of the device and removing dirt. Sanitizing – killing organisms such as bacteria or viruses that may be present on the surface of the device

|

Breast shield

| Breast pump elements (connector, suction cap, suction bowl)|

The bottle and teat

---|---|---|---
Before first use| Cleaning and sanitizing| Cleaning and sanitizing| Cleaning and sanitizing
After each use| Cleaning| Cleaning| Cleaning
Once a day| Sanitizing| Sanitizing| Sanitizing

ASSEMBLING THE BREAST PUMP

1. Wash your hands thoroughly with soap and water before touching the breast pump and breast.
2. Attach the suction bowl and pumping device to the connector.
3. Place the valve in the connector and screw the milk bottle onto the connector by turning it clockwise until it stops turning.
4. Connect the tube to the suction cap.
5. Connect the tube to the appropriate port on the pumping device.

Tips:

1. Check the breast pump components for damage before each use. Replace damaged items with new ones as needed.
2. Always check the cleanliness of the elements before using the machine
3. To avoid damage to the breast pump, make sure that all its parts are dry before using it.

CHARGING THE BREAST PUMP

Before the first use, charge the breast pump for 2 hours by connecting it to the power supply using the USB cable. The battery icon on the display will be full when charging is complete .

USING THE BREAST PUMP

1. Place the breast shield on the breast so that the nipple is inside the drainage channel.

2. Press the breast shield and the connector to your breast, using your thumb and forefinger. Support your breast with the palm of your hand.

3. Turn on the breast pump by pressing the power button and select the mode of operation that suits you.

4. Press the power button to turn off the breast pump after use and place the lid on the breast shield to protect the machine from dust.

5. The breast pump starts work in the stimulation mode. Set the suction power to a level that is comfortable for you using the+/- buttons
   Stimulation mode – fast pumping that mimics the natural sucking of breast milk by a baby, stimulating milk flow.

6. After 2 minutes, the breast pump will automatically activate the expression mode. Adjust the level of suction using the +/- buttons to find the highest level of suction that is comfortable for you. If milk begins to flow out of your breast before  two minutes pass, press the mode button to manually switch to the expression mode. Expression mode – slower pumping which gently and efficiently sucks breast milk.

7. In the expression mode, increase the suction power until you feel slight discomfort (not pain) and reduce the suction power by one degree.

FAQ

1. The machine does not start: ensure that the breast pump is connected to a working electrical outlet. If the breast pump has no power source, its display will not turn on and no error message will appear.

2. The machine does not start after pressing the power button: make sure the device
   is connected to power supply or has a fully loaded battery.

3. No/ poor suction: make sure all parts of the breast pump are correctly positioned. Disassemble the breast pump and make sure that all parts are clean and undamaged. Assemble the breast pump again according to the instructions in section 07 (Assembling the breast pump). In single pumping mode, make sure that the breast pump is connected to the proper port on the pumping device.

4.  More milk has flowed out of the breast than the bottle can hold: switch off the breast pump and unplug it. Use a damp (not wet) cloth to wipe the breast pump. If there is milk left in the tube, disconnect it from the pumping device and clean it. When all parts of the device are dry, reassemble them .

LONG-TERM STORAGE

1. The breast pump has a built-in battery. To protect against damage, the device goes into storage mode after a long period of inactivity. To turn off storage mode, connect the device to power and charge it for 2 hours.
2. Before putting the breast pump away for a longer period of time, make sure that:
3. All parts of the breast pump are clean.
4. You have cleaned the pumping device.
5. The device’s battery is fully charged.

CLEANING INSTRUCTIONS

Prepare: mild soap or other cleaning agent, clean dish towel, drinking-quality water. Parts that need to be washed or disinfected:

• Breast shield,
• Milk bottle,
• Connector,
• Valve,
• Suction cup,
• Suction bowl,
• Breast shield dust cap.

WARNING:

• Wash all parts that have had direct contact with breast milk immediately after use. This helps you will avoid residue and the growth of bacteria in the device.
• Use only drinking-quality water (tap or bottled) to clean the appliance.
• When cleaning valves, do not use small instruments such as brushes. Be careful not to pierce the part.
• Disassemble, wash and rinse all parts of the device that have come into direct contact with breast milk (except for the pump).

Cleaning (Before first use and after each use):

1. Step 1- Disassemble the device and rinse all parts that have come into contact with the breast and milk in cold water to get rid of the remains of milk and any residue.
2. Step 2- Soak in warm, soapy water for 5 minutes, then wash and rinse
3. Step 3- Let the parts air dry. Store dry device parts in a cool and dry place when you’re not using them.

Disinfection (before first use and once per day):

1. Step 1- Fill the pot with enough water to cover all parts of the disassembled device. Do not place the device in water yet. Bring water to the boil.
2. Step 2 – Place the parts of the device in boiling water for 10 minutes.
3. Step 3- Let the parts air dry. Store dry device parts in a cool and dry place when you’re not using them.

Cleaning the pumping device:
Prepare: mild soap or other cleaning agent, clean dish towel. Parts that need to be cleaned: pumping device.

WARNING:

• Do not submerge the pumping device in water.
• Do not rinse the pumping device with water.
• When cleaning the display of the pumping device, use only a damp, soft cloth with a mild soap or cleaner. Stronger cleaning products or abrasive materials can destroy the display .

SPECIFICATION

• Output power: 110-240V 50-60Hz
• Input power: SV 2A
• Weight: 785 g
• Dimensions: 105x125x52 mm
• Battery capacity and type: 3.7V 2000 mAh Li-Ion

WARRANTY CARD COMPLAINTS

The product is covered by a 24-month warranty. The terms of the guarantee can be found at: https://neno.pl/gwarancja Details, contact and website address can be found at: www.neno.pl/kontakt

Specifications and contents of the kit are subject to change without notice. We apologise for any inconvenience.

DISPOSAL

The crossed outtrash can symbol indicates that unusable A electrical or electronic devices, its accessories (such as power supplies, cords) or components (for example batteries, if included) cannot be disposed of alongside with household waste. In order to dispose of the devices or its components (for example, batteries) deliver the device to the collection point, where it will be accepted free of charge. Disposal is subject to the recast version of the WEEE Directive (2012/19 / EU) and the Directive on batteries and accumulators (2006/66 / EC). Proper disposal of the device prevents degradation of the natural environment. Information about the collection points of the facilities is issued by the competent local authorities. Incorrect disposal of waste is subject to penalties provided for by the law in force in the given area..

Manufacturer:
KGK Trade sp. z o.o. sp. k. Ujastek58 31-752 Cracow Poland Made in P.R.C.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>