neno Vista Camera Baby Monitor User Manual

June 1, 2024
neno

neno Vista Camera Baby Monitor

neno-Vista-Camera-Baby-Monitor-product

Product Information

Specifications:

  • Brand: Neno Vista
  • Product Type: Electronic Baby Monitor System
  • Components in the Box: Camera (transmitter), Monitor (receiver), 2 Power Adapters, Wall Mounting Kit, Flexible Holder, User Manual

Product Usage Instructions

Camera Description (Transmitter)

  1. Light Sensor
  2. Camera Lens
  3. LED Power Indicator
  4. Microphone
  5. Power On/Off Switch
  6. Infrared LEDs
  7. Speaker
  8. USB-C Charging Port
  9. Temperature Sensor
  10. Pairing Button

Monitor Description (Receiver):

  1. Signal Strength Indicator
  2. Selected Camera View Indicator
  3. Temperature at Camera Mounting Location
  4. Zoom Level
  5. Active VOX Mode
  6. Active Alarm
  7. Time Display
  8. Battery Level
  9. Push-to-Talk Voice Transmission Function Activated
  10. Camera Control Indicator
  11. Brightness Level
  12. Volume Level

Usage Instructions:

  1. Turn on the camera (transmitter) and hold the pairing
    button.

  2. On the monitor (receiver), press “OK” and select “Add Camera”
    under Camera options and confirm with “OK”.

  3. A message “Registration successful” will appear on the monitor
    indicating a successful pairing.

Additional Tips:

  • Keep the charging cable out of reach of children to prevent accidents.
  • Use only the original chargers provided with the product to avoid damage or safety hazards.

Dear Customer ,
Thank you for purchasing the baby monitor Neno Vista with wireless receiver. With this device, you can monitor your child’s sleep or play in another room in real time. This user manual contains all the information you need to use it correctly. Please read it and keep it in case you need to use it again.

WARNINGS

  1. This equipment complies with all relevant EMF standards and is safe to use provided it is used as described in the operating instructions.
  2. Assembly of the unit must be carried out by an adult.
  3. To avoid injury, make sure children are at a safe distance when assembling the product.
  4. This product is not a toy. Do not allow children to play with the device.
  5. An electronic nanny cannot fully replace responsible adult supervision.
  6. Do not place the camera or cables in the baby’s cot or within reach (place at least 1 metre away).
  7. Keep cables out of the reach of children.
  8. Do not store the unit near water or a heat source.
  9. Use only the power supply supplied with the device.
  10. Do not touch the contacts of the power socket with sharp or metallic objects.
  11. Do not use the product if any component is damaged or missing.
  12. Do not use accessories or spare parts other than those approved by the manufacturer.
  13. Keep children away from the working charger.

ATTENTION: The range of the device is affected by external factors (e.g. walls, high-voltage lines, and other electrical equipment), so the actual range may be less than specified.

CONTENTS OF THE KIT

  1. Camera (transmitter)
  2. Monitor (receiver)
  3. Power supply x2
  4. Wall mounting kit
  5. Flexible handle
  6. Operating instructions

DESCRIPTION OF THE CAMERA (TRANSMITTER) SEE FIG. A

  1. Light sensor
  2. Camera lens
  3. Power LED
  4. Microphone
  5. On/off switch
  6. Infrared LEDs
  7. Loudspeaker
  8. USB-C charging socket
  9. Temperature sensor
  10. Pairing button

DESCRIPTION OF THE MONITOR (RECEIVER) SEE FIG. B

  1. Antenna
  2. Brightness adjustment button
  3. Volume control button
  4. On/Off/VOX button
  5. LED charging light (blue light – charging; no light – device fully charged)
  6. Lullaby on/off button
  7. Return
  8. Camera control buttons
  9. Menu/OK
  10. Power LED (red LED – camera connected; flashing red LED – waiting for pairing)
  11. Voice transmission button (PTT)
  12. Zoom
  13. Microphone
  14. LCD display
  15. Sound detection LED indicator
  16. Loudspeaker
  17. Battery compartment
  18. Stand
  19. USB-C charging socket

neno-Vista-Camera-Baby-Monitor-fig- \(1\)

ICONS ON THE MONITOR DISPLAY SEE FIG. C

  1. Signal strength indicator
  2. Viewing indicator for selected camera
  3. Temperature at camera site
  4. Approximation level
  5. VOX mode active
  6. Active alarm
  7. Time
  8. Battery level
  9. Voice transfer function (PTT) activated
  10. Camera control indicator
  11. Brightness level
  12. Volume level

MONTAGE

  1. Method 1: Place the camera on a flat, dry surface.
  2. Method 2: The product comes with a kit with which you will mount the camera on the wall. Using screws and dowels, screw the cap onto the wall and then screw the camera onto the thread. Check that the camera is correctly fixed and will not fall out of the thread.
  3. Method 3: A flexible bracket is included with the product, with which you mount the camera in the location of your choice. Wind the bracket and then screw the camera onto the thread. Check that the camera is correctly attached and will not fall out of the thread.

CAUTION: Leave the charging cable in a safe place (position) out of the reach of the child. Failure to do so may put the child at risk of suffocation or other dangerous situations (e.g. electric shock).

GETTING STARTED

  1. Connect the power supply to the camera (transmitter) and electrical outlet. SEE FIG. D.1.
  2. Slide the power button to the right to switch on the camera (transmitter). The blue power LED will light up. SEE FIG. D.2.
  3. Connect the power supply to the monitor (receiver) and the electrical outlet. SEE FIG. D.3.
  4. The blue charging LED will light up. SEE FIG. D.4.
  5. Press the power button for 3 seconds. The display and the red power LED will light up. SEE FIG. D.5.

neno-Vista-Camera-Baby-Monitor-fig- \(3\)neno-Vista-
Camera-Baby-Monitor-fig- \(4\)

CAUTION: Use only the original charger for the original set. Failure to follow the instructions may result in damage or other dangerous situations.

USE OF THE DEVICE

Preparation of the device
Place the camera (transmitter) in a convenient location (e.g. on a table) and point its lens towards the area you wish to monitor. Adjust the camera until you are satisfied with the image displayed by the monitor.

CAUTION: Do not place the camera within the reach of a child! If there is interference with the picture or sound, move the units to other locations and make sure they are not near other electrical equipment.

Camera pairing
The attached camera (transmitter) has already been paired at the factory, you do not need to re-register it with the monitor (receiver) unless the devices lose connection. If you need to repair the camera or pair an additional camera, please follow the steps below:

  1. Switch on the camera (transmitter) and hold down the pairing button.
  2. On the monitor (receiver), press „OK” and then under Camera, select Add Camera and confirm with „OK”.
  3. The monitor (receiver) will display the message „Registration successful”.

Up to four cameras can be paired with the monitor (kit includes one camera). If you want to take full advantage of the multi-camera pairing feature we suggest purchasing an additional Neno Vista camera.

VOX
Press the ‚OK’ button on the monitor to enter the menu and then select the VOX item. By activating the VOX mode, you can also set the sensitivity level for sound detection. In this mode, the screen automatically switches off to save power. The screen reactivates automatically when noise is detected at the camera site.

The voice transfer function (PTT)
Hold down the voice transfer button (PTT) on the monitor (receiver) to speak to the child via the camera speaker. The corresponding symbol will appear in the centre of the screen.

Lullaby playback
Press the lullaby start button to turn the lullaby playback on. Press the same button again to switch off the lullaby playback.

Audio alerts
Press the ‚OK’ button to enter the menu and then select Alerts. The monitoring unit (receiver) alert warns the user when the unit:

  1. has a low battery level
  2. is out of reach.

It is possible to select the alert sound and adjust the volume.

Alarm
Press the ‚OK’ button to enter the menu, then select Alarm. Then use the up/down buttons to change the time. Press „OK” to confirm.

Main menu
Press the ‚OK’ button to enter the main menu, which contains 5 items:

  1. VOX
  2. Alarm
  3. Camera
  4. Alerts
  5. Settings

Use the UP/DOWN arrows to move the cursor to the appropriate position and confirm by pressing „OK”. To return to the main screen, press the „RETURN” button.

TECHNICAL SPECIFICATIONS

GENERAL

  • Operating temperature: -10 to +45°C
  • Permissible humidity: <85%
  • Range: up to 300m (open space)
  • Power supply: USB-C 5V 1A
  • Frequency range : 2408-2468 MHz
  • Maximum RF power emitted in the frequency range: 19 dBm

MONITOR

  • Screen: 5” IPS LCD
  • Resolution: 1280×720 px
  • Battery: Lithium-ion 3050 mAh
  • Battery life (screen on): 8 hours (third brightness level)
  • Battery life (VOX mode – audio only): 16 hours (third volume level)
  • Dimensions: 162x86x22 mm
  • Weight: 200 g

CAMERA

  • Resolution: 720 px
  • Range in night mode: 5 m
  • Sensors: light, temperature
  • Horizontal camera rotation angle: left 165°, right 165°
  • Vertical camera rotation angle: top 90°, bottom 45°
  • Dimensions: 71x71x116 mm
  • Weight: 190 g

WARRANTY CARD

The product comes with a 24-month warranty. Warranty terms and conditions can be found at: https://neno.pl/gwarancja
Details, contact and service address can be found at: https://neno.pl/kontakt Specifications and contents are subject to change without notice. We apologise for any inconvenience. KGK Trend declares that Neno Vista complies with the essential requirements of Directive 2014/53/EU. The text of the declaration can be found at the link: https://neno.pl/download/DOC/deklaracja-CE-Neno-Vista.pdf

The crossed-out trash can symbol indicates that unusable electrical of coconnents (for example batteries it pouted cannot be disposed of alongside household waste. In order to dispose of the devices or their components (for example, batteries) deliver the device to the collection point, where it will be accepted free of charge. Disposal is subject to the recast version of the WEEE Directive (2012/19/ EU) and the Directive on batteries and accumulators (2006/66 / EC). Proper disposal of the device prevents degradation of the natural environment. Information about the collection points of the facilities is issued by the competent local authorities. Incorrect disposal of waste is subject to penalties provided for by the law in force in the given area.

Producent:
KGK TREND Sp. z 0.0. ul. Ujastek 5b, 31-752 Kraków, Polska. Wyprodukowano w PRC

Manufacturer:
KGK TREND Sp. z o. 0. Ujastek 5b, 31-752 Cracow, Poland. Made in PRC

FAQ

Q: How many cameras can be paired with the monitor?
A: The monitor can pair with a maximum of four cameras, and additional cameras can be purchased separately for full functionality. Q: How does the monitor respond to noise in the camera’s
location?
A: The monitor screen activates automatically upon detecting noise near the camera’s mounting location.

Q: How can I play lullabies through the monitor?
A: Press the lullaby activation button to start playing lullabies and press it again to stop the playback.

Q: How can I manage alerts on the monitor?
A: Press “OK” to access the menu, select “Alerts,” and customize alerts for low battery or out-of-range conditions with sound options and volume adjustment.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals