Rollei LUX 100 Bi-Color Ultra Compact COB Continuous Light Instruction Manual

Rollei LUX 100 Bi-Color Ultra Compact COB Continuous Light

Product Usage Instructions

Before First Use
Read the operating instructions and safety instructions carefully before using the device for the first time. Keep the manual for future reference.

Preparing for Use

1. Remove the protective film from the device and the display before first use.
2. Remove the protective cap from the COB permanent light before each use and before switching on the device.

Adjusting Brightness
Rotate the brightness adjustment wheel to set the brightness level between 0 and 100%.

Connecting to App
Follow the instructions in the manual to connect the device to the designated mobile app for additional control options.

Troubleshooting Symbols
Refer to the manual for explanations of different symbols that may indicate errors or issues with the device.

Before the First Use

Read the operating instructions and the safety instructions carefully before using the device for the first time.
Keep the operating instructions together with the device for future use. If you pass on the device to a third party, this manual is part of the device and must be supplied with the device.

• Remove the protective film: Before using the COB permanent light for the first time, remove the protective film from the device and the display.
• Remove the protective cap: Remove the protective cap from the COB permanent light before each use, before switching on the device.

Follow these steps to ensure proper and safe use of the COB permanent light.

Intended Use
This product is designed for use as photo and video lighting only. It must not be used for any other purpose, and in particular not for domestic room lighting.

Explanation of Symbols
The following symbols are used in these operating instructions, on the COB continuous light, its accessories or on the packaging.

Safety Instructions

Danger due to electric current!
Faulty electrical installations or excessive mains voltage can cause electric shock.

• Only connect the product if the mains voltage of the socket corresponds to the information on the rating plate.
• Connect the product to an easily accessible socket so that you can disconnect it from the mains quickly in case of problems.
• Only use the mains cable supplied.
• Do not use the product if it is visibly damaged or if the cable is defective.
• If the product or accessories are damaged, they must be replaced or repaired by the manufacturer, its after-sales service or a similarly qualified person in order to avoid hazards.
• The housing must not be opened and repairs must only be carried out by a specialist. Contact a specialist workshop for this purpose. Any liability and all warranty claims are excluded in the event of repairs by the user, improper connection or incorrect operation.
• Do not use the product with an external timer.
• If you are not going to use the unit for a long time, always disconnect it from the power source.
• Protect the product from moisture. Do not touch it with wet / damp hands and do not immerse it in water.
• This product is not waterproof! Do not use this product in the rain or in wet environments. Never touch the product during a thunderstorm.
• Before disconnecting the power or battery, switch off the product at the main switch.
• Ensure adequate ventilation during operation. Never cover the unit.
• Only use the unit with suitable, high-quality Li-Ion batteries of the type NP-F as well as V-mount batteries with max. 14.8 V.
• Do not use or store the unit at high temperatures or in closed rooms with direct sunlight and do not charge the batteries during this time. The product should not be used at ambient temperatu-res above 40° C.
• To charge the batteries, disconnect them from the unit. Only use the charger supplied with the product to charge the batteries. To charge the batteries, first connect the charger to the batteries to be charged and then to the mains.
• Do not open or damage the batteries, short-circuit them, bypass them or use them for any other purpose.
• Keep the batteries away from children and animals, open flames and liquids and do not expose them to temperatures higher than 50° C (122° F).
• Immediately remove the battery and, if necessary, the charging cable from the housing in the event of unusual noises or smells or smoke.

Attention!

• Never use the power cord as a carrying handle.
• Keep the product and accessories away from naked flames, hot surfaces and highly flammable materials.
• Lay the mains cable so that it does not pose a trip hazard.
• Do not bend the mains cable or lay it over sharp edges.

Caution!
Danger for children and persons with reduced physical, sensory or mental capabilities (e.g. partially disabled persons, elderly persons with reduced physical and mental capabilities) or lack of experience and know-how (e.g. older children).

• This product can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and know-how if they have been given supervision or instruction concerning use of the product in a safe way and understand the potential hazards arising from its use. Children must not play with the product. The product must not be cleaned or cared for by children. Keep children under the age of eight away from the product and accessories.
• Do not insert objects into the product.
• Do not leave the product unattended during operation and charging.
• The appliance is not a toy. Keep the product, accessories and packaging materials away from children and animals to prevent accidents and suffocation.
• Do not film car, bus, bicycle, motorbike drivers or train drivers while driving with this product. The driver may be blinded and cause an accident. This also applies to persons or groups not listed if an accident could be caused by possible glare.
• Do not shine directly into the eyes of people or animals as this can cause retinal damage, impaired vision and even blindness. Note: Only for lighting for photographic purposes. Not suitable for permanent room lighting.

Box Content

• LUX 100 Bi-Color
• Reflector
• Power supply unit
• Cable
• Protective cap
• Diffusor ball
• User manual

Overview

1. On/off switch
2. Setting button for wireless connection
3. LUX mount release button
4. COB LED
5. LUX-Mount
6. NFC detection area
7. 1/4“ connection
8. Brightness adjustment wheel
9. OLED screen
10. Air inlet
11. Colour temperature wheel
12. Battery connection
13. USB-C port
14. DC connector

Structure and Possible Combinations Additional Equipment

Removing the protective cap
Press the LUX mount release button [3] and turn the protective cap anti- clockwise to remove it.

Note: Make sure to remove the protective cover and the protective film before use.

Fitting and removing the reflector

• Mounting the reflector: Align the reflector with the LUX mount [5] and turn the reflector clockwise until you hear a click and the reflector snaps into place.
• Removing the reflector: Press the LUX mount release button [3] and turn the reflector anti-clockwise to remove it.

Connecting the mains adapter or USB-C cable

• Connect the mains adapter to the DC connection [14]. Take care not to leave the mains adapter hanging in the air. Use the wire ring to attach the mains adapter to the lamp tripod.
• Connect a USB-C cable to the USB-C port [13] on the COB permanent light. Note: Only use a USB power adapter with at least 100 W output power.

Connection LUX 99 Wh Battery Grip (optional)

• Attach the battery grip to the COB continuous light using the 1/4“connection.
• If you are supplying the light with power via the LUX 99Wh Battery Grip, use the D-Tap DC cable to connect the D- Tap connection of the battery and the DC connection [14] of the light.
• Do not use the USB-C connection [13] of the battery for the power supply.

Operation

• Remove the protective film: Before using the COB permanent light for the first time, remove the protective film from the device and the display.
• Remove the protective cap: Remove the protective cap from the COB permanent light before each use, before switching on the device.

Follow these steps to ensure proper and safe use of the COB permanent light.

1. Switch on/off

• Switch on : Connect the device to the power source and then press and hold the on/off switch [1].
• Switch off: Long press the on/off switch [1] to switch off the device.

Wireless connection

• Briefly press the wire-less connection setting button [2] to switch between 2.4GHz (remote control for Candela/Lux) and app.
• Press the button button for a long time to start the pairing to start pairing.

Adjusting the brightness

• Turn the brightness adjustment dial [8] to set the brightness between 0 and 100 %.
• Briefly press the brightness adjustment dial [8] to select a preset brightness (0 %, 25 %, 50 %, 75 %, 100 %)

Setting the colour temperature

• Turn the colour temperature dial [11] to set the colour temperature between 2,700 and 6,500 K.
• Briefly press the colour temperature dial [11] to select the preset colour temperature (2,700 K, 3,200 K, 4,300 K, 5,600 K, 6,500 K).

Effect control/fan control
Connect to the app to adjust the fan and effect settings.

Description of the symbols

App connection status symbol

Connect with the App

1. Download the Candela/Lux LED app directly from the App Store (iOS 9.0 or higher). For technical reasons, the app is currently only available for iOS.
2. Activate Bluetooth®* on your smartphone.
3. Switch on the LUX LED light.
4. Press and hold the wireless connection setting button [2] to activate Bluetooth®* and start pairing mode
5. Open the Candela/Lux LED app and create a new scene using the ”+“.
6. Click ”Add Device“, then click ”New Device“.
7. Select the desired light and click on ”Add to scene“.
8. If a connection is not established immediately, select the device again as described in steps 6 and 7 and press the wireless connection setting button [2] on the device at the same time. Repeat this step until the devices are connected.

You can download the app here:

You can find detailed instructions on how to connect to the app in our download centre.

Technical Data

3,200 K, 0 .5 m, 11,800 lx

4,500 K, 0 .5 m, 13,000 lx

5,500 K, 0 .5 m, 13,500 lx

3,200 K, 1 m, 3,010 lx

4,500 K, 1 m, 3,340 lx

5,500 K, 1 m, 3,450 lx

3,200 K, 1 .5 m, 1,400 lx

4,500 K, 1 .5 m, 1,550 lx

5,500 K, 1 .5 m, 1,620 lx

Lighting effects| 10
Lighting angle COB continuous light| 120 °
Flicker-free| Up to 240 fps
Fan volume| 28 dBA (100 % brightness, 1 m)
Frequency band| 2 .402 GHz – 2 .480 GHz
Max. radiated transmitted power| 10 dBm
Connections| DC connection, USB-C connection, 1/4“ tripod connection
---|---
Power supply| Rollei AC/DC adapter for LUX 100 Bi-colour | Power supply unit: Input 100 – 240V ~ 2 .5 A | 50 / 60 Hz |

Output: 24 .0 V 5 .0 A | LUX 99Wh

Battery Grip (not included) |

Output USB-C: 100 .0 W min .

Input power| 24 .0 V 5 .0 A
Nominal input power| 120 .0 W
Dimensions| 15 .7 x 4 .3 x 9 .3 cm
weight| 345 g
What‘s in the box| COB permanent light, reflector, protective cap, mains adapter with cable (1 .80 m), diffuser ball, operating instructions

We reserve the right to make changes to technical data and do not require prior notice. *The Bluetooth® word mark and logos are registered trademarks of the Bluetooth SIG, Inc. and any use of such marks by Rollei is under licence. Other trademarks and trade names are the property of their respective owners.

Disposal

• Dispose of the packaging according to its type.
• Use the local possibilities for collecting paper, cardboard and other materials (applicable in the European Union and other European countries with systems for the separate collection of recyclable materials).
• Devices that are marked with this symbol must not be disposed of with household waste! You are legally obliged to dispose of old devices separately from to dispose of household waste. Information on collection points that accept old appliances free of charge can be obtained from your local authority or town council.

Conformity 43
Rollei GmbH & Co. KG hereby declares that the radio equipment type ”Rollei LUX 100 Bi-Color“ is in compliance with Directive 2014/53/ EU.
The full text of the EU Declaration of Conformity is available at the following internet address: www.rollei.com/egk/lux100bi- color

Rollei GmbH & Co. KG

• In de Tarpon 42
• D-22848 Norderstedt
• Germany

Rollei GmbH & Co. KG In de Tarpen 42 D-22848 Norderstedt

Service Hotline: +49 40 270750277

www.rollei.de

FAQ

What should I do if the NTC error symbol lights up?
If the NTC error symbol lights up, indicating a problem with the COB temperature sensor, it is recommended to contact customer service immediately for assistance.

How do I adjust the color temperature of the light?
Use the color temperature adjustment wheel to set the desired color temperature based on your requirements.

Is the product suitable for use with batteries?
The product features a battery connection but currently does not support battery operation.

References

• cewe - best in print
• Rollei: Der Online-Shop für Kamera- Video- und Foto-Equipment – Rollei

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>