neno Mio Feeding Bottle User Manual
- June 1, 2024
- neno
Table of Contents
neno Mio Feeding Bottle
Product Specifications
- Anti-Colic Valve
- Construction Material: PPSU, PP, Silicone
- Dimensions: Height – 22cm, Weight – 182g, Capacity – 300ml
Product Usage Instructions
Before Use
Before using the Neno Mio baby bottle, please ensure to read the accompanying instructions thoroughly. The bottle is suitable for babies aged 6 months and older.
Cleaning Instructions
- Place the tea in boiling water for 5 minutes before the first use.
- Clean the bottle before each use.
- Do not place the product in a microwave oven or use microwave waves to heat its contents.
- Avoid using abrasive or antibacterial agents during cleaning.
Maintenance
To maintain the bottle and ensure proper functionality:
- Regularly clean the silicone-weighted straw by pulling it through with warm soapy water.
- If the straw’s weight bore is clogged, use a plastic needle to unclog the flow.
Warranty Information
The product comes with a 24-month warranty. For warranty terms and conditions, visit: neno. pl/gwarancja . Contact and service details can be found at neno.pl/kontakt.
Frequently Asked Questions (FAQ):
Q: What is the recommended age for using the Neno Mio baby bottle?
A: The bottle is suitable for babies aged 6 months and older.
Q: Can I heat the contents in the bottle using a microwave oven?
A: No, do not place the bottle in a microwave oven or use microwave waves to heat its contents.
Q: How should I clean the silicone weighted straw?
A: Clean the straw by pulling warm soapy water through it. If clogged, use a plastic needle to unclog the flow.
Dear Customer,
- The Neno Mio product you have purchased is a baby bottle with a teat that can be used for feeding and drinking, as well as for expressing breastmilk using all Neno brand breast pumps.
- Before using the bottle, it is necessary to read the accompanying instructions. The bottle is suitable for babies aged 6 months and over.
PRECAUTIONS
- Do not allow your child to use this product without adult supervision.
- Do not allow your child to play with the parts of the bottle or run with it.
- Never use a bottle teat as a normal teat.
- Always check the temperature of the contents of the bottle before feeding your baby.
- Keep all components out of the reach of children.
- Wash the product before first use. Check the condition of the product carefully before each use and stretch the teat in all directions with your fingers.
- If the teat shows any signs of damage or wear, discard it. Do not leave the teat in direct sunlight, in a hot place or a steriliser for longer than recommended as this may damage the product.
- Do not place the product in a hot oven.
- Place the tea in boiling water for 5 minutes before first use. Clean before each use.
- Do not place the bottle in a microwave oven. Do not use microwave waves to heat the contents in the bottle.
- Do not use abrasive or antibacterial agents when cleaning the product. Do not place product parts directly on surfaces that have been cleaned with antibacterial agents.
- Too much concentration of cleaning agents can cause the plastic to crack. In case of visible cracks in the product, discard it immediately.
- Sterilization and high temperatures can lead to distortion and the cap not fitting into the bottle.
- The bottle is dishwasher-safe in the top basket.
- Boiling the bottle and teat in hard water can cause sediment to form – a natural process resulting from the hardness of the water.
CONTENTS OF THE KIT
- Bottle
- Teat size +6m
- Cap
- Lid
- Silicone weighted straw
- Handle
Sucking is an important part of a baby’s development, so when feeding a bottle with a teat, make sure that the child can suck actively and effortlessly.
MONTAGE
Place the lid on the bottle so that the teat is in an upright position. To
remove the lid, place your hand on it by placing your thumb against the bottom
of the lid.
The decorative element on the lid is easy to remove for hygienic reasons. This
keeps the teat area hygienic and the nooks easy to clean, so do not pull on
this element when removing the lid.
It is easier to insert the teat if you move it sideways rather than pulling it
through the hole in a straight line. Pull the teat through the hole until the
base is level with the retaining ring.
CLEANING
- Before using the bottle for the first time, take it apart, clean it thoroughly, and sterilize it using a bottle sterilizer or boiling water.
- The sterilization process should take no more than 10 minutes. After each use, disassemble the product and wash the parts using warm water and detergent, then rinse.
- Before using sterilized items, carefully wash your hands and the surfaces on which the items will be placed.
- To clean the weighted straw, use a straw brush that fits its width. Insert the brush into the straw and pull through several times to clean properly. If the weight bore is clogged, use a plastic needle to unclog the flow.
CONSERVATION
- Check the condition of the product carefully before each use and stretch the teat in all directions with your fingers.
- Throw away the teat when you notice signs of damage or wear.
- Do not leave the teat in direct sunlight or hot places, or soak it in a sterilizing agent for longer than recommended, as this may damage the product.
- For reasons of hygiene, it is recommended that teats be replaced every 3 months. Store teats in a dry, closed container.
- Do not use the bottle if there are any cracks on it.
- Do not allow children to use the bottle without adult supervision.
SPECIFICATION
- Anti-colic valve
- Material of construction: PPSU, PP, Silicone
- BPA-free
- Convenient scale on the bottle
- Dimensions: Ø7.5×12.5x22cm
- Weight: 182g
- Bottle capacity: 300 ml
GUARANTEE CARD
- The product comes with a 24-month warranty. Warranty terms and conditions can be found at: https://neno.pl/gwarancja
- Details, contact, and service address can be found at: https://neno.pl/kontakt Specifications and contents are subject to change without notice. We apologize for any inconvenience.
- Manufacturer:
- KGK TREND Sp. z o. o.
- st. Ujastek 5b, 31-752 Cracow, Poland.
- Made in PRC
Documents / Resources
| neno
Mio Feeding
Bottle
[pdf] User Manual
Mio Feeding Bottle, Mio, Feeding Bottle, Bottle
---|---