bouncepad BP-COR-FS-B Core Floorstan Ding Installation Guide
- September 12, 2024
- bouncepad
Table of Contents
bouncepad BP-COR-FS-B Core Floorstan Ding
Specifications
- Maximum Mounting Surface Thickness: 25mm
- Compatible with Anker PowerCore 10000mAh battery pack (batterypack not provided)
Pro duct Usage Instructions:
Assembly Instructions
- Use the provided tools: Socket Driver, 10mm Spanner or adjustable spanner for assembly.
- Assemble the Floorstanding Pole to the Floorstanding Base securely with the fixings provided.
- Attach the Shell to the Floorstanding in the correct orientation (landscape or portrait).
- Clean the tablet with the provided wipe before attaching the Mounting Plate.
- Attach the Mounting Plate to the tablet’s back, ensuring it is level and centered.
- Secure the Flat Cable to the tablet and Mounting Plate using the Cable Clamp.
- Feed the Flat Cable through the assembly and secure the tablet to the Shell.
- Connect the tablet’s power cable to its mains power source. If using a battery pack, connect it and place it in the Floorstanding Base.
- Fit the Floorstanding Rubber Collar to complete the installation.
FAQ
-
Q: Can I use an alternative battery pack?
A: The product is designed to support the Anker PowerCore 10000mAh battery pack. Other packs have not been tested for compatibility. -
Q: What should I do if I receive additional fixings in the kit?
A: Due to the modular nature of our product range, extra fixings may be included. Contact customer support if you are unsure about their use.
Core Floorstanding
Assembly Instructions
Tools Required
- Socket Driver
- 10mm Spanner *or adjustable spanner
- Sheet Code: BP-IM-092_REV0
- Release Date: 15/08/2024
Copyright 2024 Spotspot Ltd. (T/A Bouncepad) all rights reserved. Confidential, no part of this publication may be reproduced or transmitted in any form without the written permission of the copyright holder.
In the Box
Fixings List
-
Due to the modular nature of our product range you may receive additional fixings in the fixings kit
- Orientate, locate & secure the Floorstanding Pole to the Floorstanding Base as shown. Ensure that all fixings are installed correctly.
- Locate the Floorstanding Cover over the Floorstanding Pole.
- Locate & attach the Shell to the Floorstanding in the correct orientation.
- Remove the Mounting Plate adhesive backing. Attach level & centrally to the Tablet back as shown.
- Attach the Flat Cable to the Tablet with the U-Bend Head.
- Secure the Flat Cable to the Mounting Plate with the Cable Clamp as shown.
- Remove the Fixing Covers. Feed the Flat Cable into the assembly & locate the Tablet in the chosen orientation.
- Secure the Tablet to the Shell & attach the Fixing Covers as shown.
-
- Connect the tablet power cable to its mains power source.
- If installing a battery pack, connect the Tablet Cable and locate the pack into the Floorstanding Base.
- With the Floorstanding Cover on the ground, locate & fit the Floorstanding Rubber Collar.
- Use a Kensington® Microsaver product to tether to a secure object. (refer to your Kensington® instructions for full details)
- Installation is now complete.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>