bouncepad CD-B4-TA9P-MX Counter Tablet Security Enclosure Instruction Manual
- June 17, 2024
- bouncepad
Table of Contents
bouncepad CD-B4-TA9P-MX Counter Tablet Security Enclosure
Product Information
Specifications
- Product Name: Counter
- Sheet Code: BP-IM-037_REV3
Frequently Asked Questions
- Q: What tools are required for assembly?
- A: You will need a Socket Driver and a T20 Pin Torx Driver Bit.
- Q: Can I use electric tools to tighten the screws?
- A: No, using electric tools may damage your Bouncepad. Please tighten the screws using hand tools only.
- Q: How do I record the key number for future reference?
- A: We recommend recording the key number provided in the Pair of Keys so that you can purchase additional keys in the future if needed.
Tools Required:
- Socket Driver
In the Box
Fixings List
Fixings List
‘Mounting Arm Box’ includes:
‘Freestanding Base Box’ includes:
-
- Due to the modular nature of our product range you may receive additional fixings in the fixings kit
Installation Instructions
- Locate & secure the Flex Mounting Arm to the Freestanding Base.
- Attach the Bouncepad Case to its Mounting Arm. Take care to ensure correct & full thread engagement.
- Unlock & remove the Faceplate from the Bouncepad Case.
- Install the Tablet Setup Kit. Each kit is specific per tablet device and Bouncepad Case.
- Feed the tablet cable through the Bouncepad Case & mounting arm.
- Place the tablet into the Case and connect to power.
- Locate and lock the Faceplate onto the Bouncepad Case.
- We recommend recording the key number so you can purchase additional keys in the future.
- Installation is now complete.
Copyright 2016 Spotspot Ltd. (T/A Bouncepad) all rights reserved.
Confidential, no part of this publication may be reproduced or transmitted in
any form without the written permission of the copyright holder.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>