bouncepad Sumo 270 Mounting Arm Instruction Manual

bouncepad Sumo 270 Mounting Arm

Product Information
This product is a Sumo Mounting Arm from Bouncepad, manufactured by Spotspot Ltd. It is a modular product that comes with fixings for installation. The product is designed to securely mount an display devices.

Product Specifications

• Sheet Code: BP-IM-055_REV0
• Release Date: 01/10/2019
• Copyright 2016 Spotspot Ltd. (T/A Bouncepad) all rights reserved.

In the Box

• Sumo Mounting Arm
• Fixings Kit (additional fixings may be included due to the modular nature of the product range)

Fixings List

Bouncepad does not supply the fixings used in a Fixing from Above installation.

Assembly Instructions
Tools Required:

• 5x M6 Locking Nut
• 5x M6 Split Washer
• 5x M6x40mm Socket set screw
• 1x Mount Washer

Fixing from Below

1. Using the template A2.0 (A2.1 overleaf), mark the drill hole locations.
2. With the correct drill bits, drill each hole.
3. Tighten screw(s) using hand tools. Using electric tools may damage your Bouncepad.
4. Attach the socket set screws to the mounting arm.
5. Locate and secure the Sumo Stalk in its chosen orientation. Ensure that the correct fixings are used.
6. For additional security, it is recommended to use Pin-Torx countersunk screws.
7. Remove the adhesive backing and protective netting, then locate the Stalk Cover to the mounting surface.
8. Installation is complete.

Fixing from Above

1. Using the template B2.0 (B2.1 overleaf), mark the drill hole locations.
2. With the correct drill bits, drill each hole.
3. Tighten screw(s) using hand tools. Using electric tools may damage your Bouncepad.
4. Secure the Sumo Stalk to the mounting surface with chosen countersunk fixings. Ensure all screws are below flush in the countersunk holes.
5. Remove the adhesive backing and protective netting, then locate the Stalk Cover to the mounting surface.
6. Installation is complete.

Sumo Enclosure Assembly Instructions
Tools Required:

• Socket Driver
• Pair of Keys
• PZ3 Driverbit

Assembly Steps

1. Locate the Sumo Case onto the Sumo Stalk in your chosen orientation.
2. Secure the Sumo Case to the Sumo Stalk.
3. Unlock and remove the Sumo Faceplate from the Sumo Case.

Sumo 270˚ Mounting Arm
Assembly Instructions Tools Required:

• Pencil
• Drill
• Ø6.0mm Drillbit
• Ø2.5mm Drillbit
• Ø16.0mm Holesaw
• 10mm Spanner *or adjustable spanner

Sheet Code: BP-IM-055_REV0Release Date: 01/10/2019
Copyright 2016 Spotspot Ltd. (T/A Bouncepad) all rights reserved. Confidential, no part of this publication may be reproduced or transmitted in any form without the written permission of the copyright holder.

• Follow step A if “Fixing from below”.
• Using the template
• (A2.1 overleaf) mark the drill hole locations.
• Follow step B if “Fixing from Above”.
• Using the template
• (B2.1 overleaf) mark the drill hole locations.
• With the correct drill bits, drill each hole.
• Attach the socket set screws to the mounting arm.
• Locate & secure the Sumo Stalk in its chosen orientation. Ensure that the correct fixings are used.
• Remove the adhesive backing & protective netting, then locate the Stalk Cover to the mounting surface. Installation is complete.

Rear Edge of the Mounting Surface or Wall

Sumo Enclosure Assembly Instructions

Tools Required

• Socket Driver

Sheet Code: BP-IM-049_REV1
Release Date: 01/10/2019 Copyright 2016 Spotspot Ltd. (T/A Bouncepad) all rights reserved. Confidential, no part of this publication may be reproduced or transmitted in any form without the written permission of the copyright holder.

1. Locate the Sumo Case onto the Sumo Stalk in your chosen orientation.
2. Secure the Sumo Case to the Sumo Stalk.
3. Unlock & remove the Sumo Faceplate from the Sumo Case.
4. Feed the tablet power cable through the Sumo Case and Sumo Stalk.
5. Install the tablet into the Sumo Case & connect it to the power cable.
6. Locate the Sumo Faceplate onto the Sumo Case – pressing the Faceplate firmly down to ensure correct locking.
7. Connect to power & turn on.
8. Installation of the Sumo Case upon the Sumo Stalk is now complete.
9. Installation is now complete.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>