Silver Crest SLSN 3 D3 Personal Care Womens shaver SLS Instructions

July 15, 2024
SILVER CREST



PDF ONLINE
www.lidl-service.com

WET & DRY LADY SHAVER SLSN 3 D3


WET & DRY LADYSHAVER

Operating instructions and safety instructions

IAN 444878_2307

Congratulations!
By purchasing the SilverCrest lady shaver SLSN 3 D3, you have opted for a high-quality product.
Familiarise yourself with the lady shaver before using it for the first time and read these operating instructions carefully. Observe the safety instructions and only use the lady shaver in the manner described in these operating instructions and for the indicated fields of application.
Keep this operating manual in a safe place. Hand over all documents in the event that you pass on the lady shaver to a third party.

1. Intended use


The lady shaver may only be used for private purposes and is not for industrial or commercial use. In addition, the lady shaver must not be used outside of closed rooms.
The lady shaver is only intended for shaving and trimming human hair. It is suitable for armpits, legs and the bikini line area. The shaver can be used both dry and in the shower.
Any use other than that described in these operating instructions is deemed improper and can lead to injury as well as damage to property.
This lady shaver meets the requirements of all relevant standards related to CE conformity. Compliance with these standards is no longer guaranteed if a change is made to the lady shaver without the authorisation of the manufacturer. The manufacturer shall not be liable for any damages or faults arising as a result.
Please observe the national regulations and/or laws of the country in which the device is used.

2. Package contents


Unpack the lady shaver and all of the accessories. Remove all packaging materials and check all parts for completeness and for signs of damage. If any parts are missing or damaged, please contact the manufacturer.

  • Lady shaver
  • Two batteries
  • Protective cover
  • Glide cap
  • Exfoliation attachment
  • Cutter attachment
  • Storage bag
  • Cleaning brush
  • Blade oil
  • This operating manual

3. Device description


This operating manual also has a cover that can be unfolded. The inside of the cover provides a schematic of the lady shaver and a number legend. The numbers identify the following parts/functions:
1 Protective cover
2 Shaving foil
3 Trimmer
4 Trimmer locking mechanism
5 Unlock button
6 Shaver head
7 ON/OFF switch ( I = ON, 0 = OFF)
8 Travel safety lock
9 Battery compartment cover
10 Glide cap
11 Exfoliation attachment
12 Cutter attachment
13 Batteries
14 Cleaning brush
15 Blade oil
16 Storage bag

4. Technical data


Model SilverCrest SLSN 3 D3
Power supply 2 x 1.5 V , LR6/Mignon/AA
Protection class IPX6 (protection against strong jets of water)
Operating time approx. 120 minutes (with two new batteries)
Operating temperature  0°C to 35°C

Storage temperature,
atmospheric humidity| -10°C to +45°C;
max. 85% relative humidity

The specifications and design are subject to change without notice.

5. Safety instructions


Before using the lady shaver for the first time, read the following instructions carefully and observe all warnings, even if you are familiar with using electronic devices. Keep this operating manual in a safe place for future reference.

DANGER! This symbol, in conjunction with the word ‘Danger’, indicates an impending dangerous situation which, if not prevented, may lead to serious injuries or even death.

WARNING! This icon, in conjunction with the word ‘Warning’, indicates important information for the safe operation of the lady shaver and user safety.

This symbol indicates that the lady shaver is suitable for use in a bath or shower.

   This symbol indicates further information on the topic.

      DC voltage

    Manufacturer’s address

The meanings of the symbols on the supplied batteries are as follows:

1   Store the device out of reach of children.
2   Do not throw the device onto a fire to dispose of it.
3   Do not insert batteries with the positive and negative poles reversed.
4   Do not deform or damage the device.
5   Do not open or pull the device apart.
6   Do not mix battery brands within the device.
7   Do not use new and discharged batteries together.
8   Do not recharge the batteries.
9   Keep dry.
10  Do not short the batteries.
11  Always insert batteries with the correct polarity.

Operating environment

The lady shaver is designed for operation in rooms with high humidity (for example, bathroom) but not in rooms with excessive dust.

DANGER! The lady shaver is only intended for trimming human hair. Take care when shaving areas of the body with thinner skin (for example, armpits or pubic area). There is a risk of injury.

DANGER! This lady shaver can be used by children aged eight and over, as well as by people with reduced physical sensory or mental abilities or who lack experience and/or knowledge, providing they are supervised or have been instructed in the safe use of the device and understand the resulting dangers. Children must not play with the lady shaver. Cleaning and user maintenance may not be performed by children, unless they are supervised. Small parts can be lethal if swallowed. Also keep the packaging film away from children. There is a risk of suffocation.

DANGER! If you notice any smoke, unusual noises or smells, immediately switch off the lady shaver and remove the batteries (13). If this happens, you must stop using the lady shaver until it has been checked by a technician. If the device catches fire, do not inhale any resulting smoke. If you do inhale any smoke, seek medical attention. Inhaling smoke can be harmful to your health.

DANGER! Make sure there are no naked flames (for example, burning candles) placed on or near the lady shaver. There is a risk of fire!

DANGER! Never operate the lady shaver near highly flammable materials, such as curtains or explosive and/or flammable gases or liquids. There is a risk of fire.

WARNING! In order to avoid hazards, the lady shaver must not become damaged.

WARNING! The lady shaver must not be exposed to direct sources of heat (for example, heaters), direct sunlight or strong artificial light. Also avoid contact with aggressive liquids. Also make sure that the device is not exposed to excessive shocks and vibrations. Furthermore, no foreign bodies should penetrate the device. This could damage the lady shaver.

WARNING! Only allow the manufacturer’s service department or an authorised specialist to carry out repairs on the lady shaver. Improper repairs may lead to injury! This will also void your guarantee.

WARNING! Never use the lady shaver if the shaving foil (2) or trimmer (3) is damaged. There is a risk of injury!

WARNING! Never use the lady shaver if an attachment (10, 11, 12) is faulty or broken. There is a risk of injury!

DANGER! Batteries
Always insert the batteries (13) with the correct polarity. When doing so, observe the label in the battery compartment. Do not try to recharge the batteries (13) and never throw it onto a fire. Do not use different batteries (old and new, alkaline and carbon etc.) at the same time. Remove the batteries (13) if you intend not to use the device for a longer period of time. There is a risk of explosion and leakage if the device is not used properly. Batteries (13) are not a toy. In the event that the batteries (13) are swallowed, seek immediate medical attention. Batteries (13) must not be opened or deformed in any way because leaking chemicals can cause injury. In case of contact with the skin or eyes, rinse/wash the area with plenty of water and seek medical attention. Remove dead batteries (13) from the device and properly dispose of them. Make sure to never short-circuit the lugs.

6. Copyright


All contents of this operating manual are subject to copyright law and are provided to the user solely as a source of information. Any form of copying or reproduction of data and information without the express written permission of the author is prohibited. This also concerns commercial use of the content and data. The text and illustrations correspond to the technical standards at the time of printing. Subject to alterations.

7. Before initial use


7.1 Inserting/replacing the batteries (13)
  • Switch the lady shaver off using the ON/OFF switch (7).

  • Open the battery compartment by pulling the battery compartment cover (9) downwards.

  • Where necessary, remove any batteries (13) that are already inserted.

  • Install two new type LR6/Mignon/AA batteries (13) if necessary. Please note the labels on the batteries (13) and in the battery compartment.

  • Place the battery compartment cover (9) back onto the battery compartment and push upwards as far as it will go.

  • The lady shaver is now ready for use.

    • Use 1.5 V type LR6/Mignon/AA batteries (13) only.
      • Always change both batteries (13) at the same time.
      • Ensure the correct polarity when inserting the batteries (13).
        When doing so, observe the labels on the batteries (13) and in the battery compartment.

8. Initial use


When shaving sensitive areas of the body such as your bikini line or arm pits, the skin must always be taut in order to avoid injury.

If you have sensitive skin or are prone to allergic reactions on your skin, we recommend performing a patch test on a small, hidden section of the skin first.

Please do not use shaving gel or shaving foam.

8.1 Travel safety lock

The travel safety lock (8) prevents the lady shaver from accidentally switching on.

To switch on the lady shaver, slide the ON/OFF switch (7) towards the shaving foil (2) while pressing the travel safety lock (8). The lady shaver will now start.

8.2 Shaving with the shaving foil (2)

Before a dry shave, ensure that the skin is clean, dry, and clear of any cream.

  • Pull the protective cover (1) upwards.
  • Generally, no attachment (10, 11, 12) is used when in normal shave mode. However, using an attachment may be useful in certain situations. Please see Sections 8.4 to 8.6 for more detailed instructions on using the attachments supplied (10, 11, 12).
  • Slide the ON/OFF switch (7) towards the shaving foil (2) while the travel safety lock (8) is pressed. The lady shaver will now start.
  • Hold the lady shaver at a right angle to your skin and, in straight lines, run the shaving foil (2) against the direction of hair growth.
  • Once you have finished shaving, push the ON/OFF switch (7) back into its original position. The lady shaver will now stop.
  • We recommend cleaning the lady shaver with the cleaning brush (14) after every shave. For details on how to clean the lady shaver more thoroughly, please refer to section ‘9. Cleaning/maintenance’.

The lady shaver is also suitable for use in the shower, but do not immerse the device under water, as this may result in irreparable damage.

8.3 Shaving with the trimmer (3)

If you haven’t shaved in a while and the hair is slightly longer, e.g., on your legs, use the trimmer (3). Then shave the corresponding areas of the skin as described in section ‘8.2 Shaving with the shaving foil (2)’. To use the trimmer (3), proceed as follows:

  • Pull the protective cover (1) upwards.
  • No attachment (10, 11, 12) is used when in trimmer mode.
  • Push the trimmer locking mechanism (4) towards the shaving foil (2). The trimmer (3) is now secure . This position is recommended if precise lines or contours are to be shaved, such as when styling the bikini line. Always ensure that the skin is taut in order to avoid injury.
  • Slide the ON/OFF switch (7) towards the shaving foil (2) while the travel safety lock (8) is pressed. The lady shaver will now start.
  • Hold the lady shaver so that the trimmer (3) is facing the skin and is angled at approximately 45°. Now run the trimmer (3) along the area of skin you are trimming. Ideally, it is best to trim against the direction of hair growth.
  • Once you have finished trimming the desired area of skin, push the ON/OFF switch (7) back into its original position. The lady shaver will now stop.
  • We recommend cleaning the lady shaver with the cleaning brush (14) after every shave. For details on how to clean the lady shaver more thoroughly, please refer to section ‘9. Cleaning/maintenance’.
8.4 Cutter attachment (12)

The cutter attachment (12) should be used if you just want to shorten hair or trim the bikini line.

  • Pull the protective cover (1) upwards.
  • Place the cutter attachment (12) onto the lady shaver from the top and push it downwards until you hear it click into place. When putting on the attachment, ensure that the recess for the trimmer locking mechanism (4) is on the right-hand side.
  • Slide the ON/OFF switch (7) towards the shaving foil (2) while the travel safety lock (8) is pressed. The lady shaver will now start.
  • Run the lady shaver in straight lines over the area of the hair you wish to trim. Keep repositioning the lady shaver, moving it slowly against the direction of hair growth.
  • Once you have finished on the desired area of skin, push the ON/OFF switch (7) back into its original position. The lady shaver will now stop.
  • We recommend using the cleaning brush (14) to clean the lady shaver and attachment (12) after every shave. For details on how to clean the lady shaver more thoroughly, please refer to section ‘9. Cleaning/maintenance’.
8.5 Shaving your legs with the exfoliation attachment (11)

Shaving with the exfoliation attachment (11) improves the appearance of your skin at the same time. During the shave, the exfoliation attachment (11) removes dead skin cells and revitalises the surface, leaving you with glowing skin.

  • Pull the protective cover (1) upwards.
  • Place the exfoliation attachment (11) onto the lady shaver from the top and push it downwards until you hear it click into place. When putting on the attachment, ensure that the recess for the trimmer locking mechanism (4) is on the right-hand side.
  • Slide the ON/OFF switch (7) towards the shaving foil (2) while the travel safety lock (8) is pressed. The lady shaver will now start.
  • Hold the lady shaver at a right angle to your skin and, in straight lines, run the shaving foil (2) against the direction of hair growth. Please make sure that the exfoliation attachment (11) and shaving foil (2) are touching the skin at the same time.
  • Once you have finished shaving, push the ON/OFF switch (7) back into its original position. The lady shaver will now stop.
  • We recommend using the cleaning brush (14) to clean the lady shaver and attachment (11) after every shave. For details on how to clean the lady shaver more thoroughly, please refer to section ‘9. Cleaning/maintenance’.
8.6 Shaving your legs with the glide cap (10)

The glide cap (10) gives you a particularly gentle, close shave on your legs. It enables the shaving foil (2) and trimmer (3) to glide over the skin more easily, thus reducing skin irritation.

  • Pull the protective cover (1) upwards.

  • Place the glide cap (10) onto the lady shaver from the top and push it downwards until you hear it click into place. When putting on the attachment, ensure that the recess for the trimmer locking mechanism (4) is on the right-hand side.

  • Push the trimmer locking mechanism (4) towards the ON/OFF switch (7).
    In this position, the trimmer (3) will move with the glide cap (10) during the shave.

  • Slide the ON/OFF switch (7) towards the shaving foil (2) while the travel safety lock (8) is pressed. The lady shaver will now start.

  • Hold the lady shaver at a right angle to your skin and, in straight lines, run it against the direction of hair growth.

  • Once you have finished shaving, push the ON/OFF switch (7) back into its original position. The lady shaver will now stop.

  • We recommend using the cleaning brush (14) to clean the lady shaver and attachment (10) after every shave. For details on how to clean the lady shaver more thoroughly, please refer to section ‘9. Cleaning/maintenance’.

8.7 After shaving

Immediately after shaving, avoid using substances that can cause skin irritation, e.g., deodorants containing alcohol.
However, it is perfectly fine to apply a little cream or body lotion.

9. Cleaning/maintenance


9.1 Cleaning
  • Remove the protective cover (1) or attachment (10, 11, 12), if fitted. The protective cover (1) and attachments (10, 11, 12) can be cleaned using soapy water. Then dry it well.
  • The housing of the lady shaver can be wiped using a slightly damp cloth; never use any aggressive cleaning agents.
  • Remove any remaining hair from the shaver head (6) using the cleaning brush (14).
  • For a more intensive clean, you can remove the shaver head (6) from the lady shaver. Using your thumb and forefinger, press the unlock buttons (5) on both sides of the shaver head (6), pulling it upwards to remove.
  • The head part of the lady shaver and the removed shaver head (6) can be rinsed off under running water. Then dry the parts thoroughly. Do so carefully to prevent damaging the shaving foil (2).
  • Then place the shaver head (6) back on in reverse; the trimmer locking mechanism (4) must be positioned above the ON/OFF switch (7) when doing so. Slide the shaver head (6) downwards until you hear it click into place.

After cleaning, add a few drops of blade oil (15) to the trimmer (3) and the shaving foil (2) every so often. Leave the lady shaver running for a few seconds without using it to allow the blade oil (15) to spread out evenly. Then, wipe off any excess blade oil (15) with a soft cloth.

9.2 Maintenance

The shaver head (6) of the lady shaver is subject to constant wear resulting from use.

DANGER! Stop using the lady shaver if you notice that the shaver head (6) and/or shaving foil (2) has become damaged. Risk of injury!

The shaver head (6) must be replaced if…

  • you see any damage
  • you notice slight pulling when shaving or the shave is not as thorough as usual
  • it has become worn through use, usually after a year at the latest

The shaver head (6) is subject to wear and is not covered by the guarantee.
A new shaver head (6) can be ordered online from the following website:
shop.targa.de

9.2.1 Changing the shaver head
  • To unlock the shaver head, press both unlock buttons (5) at the same time; these are located on the side of the shaver head.
  • Keep the unlock buttons (5) pressed and lift the shaver head upwards to remove.
  • Now attach the new shaver head onto the top of the lady shaver with the trimmer locking mechanism (4) facing the front.
  • Press the shaver head downwards evenly until you hear it click into place.
9.3 Storing the device when not in use

If the lady shaver is not going to be used for a long period of time…

  • clean it as described in section ‘9. Cleaning/maintenance’.
  • Remove the batteries (13) from the battery compartment.
  • Keep it in a cool, dry, clean place.

We recommend using the storage bag (16) when storing the device.

10. Troubleshooting


The lady shaver will not switch on.

  • Check whether the batteries (13) are drained. Install two new type LR6/Mignon/AA batteries (13) if necessary.

11. Environmental and waste disposal information

| Devices marked with this symbol are subject to the European Union Directive 2012/19/EU. Electrical and electronic devices may not be put in the household waste, but must be disposed of via designated public disposal centres. By properly disposing of the old device, you can avoid environmental damage and health hazards. Further information regarding proper disposal of the old device can be obtained from your local authority or the shop where you purchased the device.
---|---
| The crossed-out bin symbol on batteries indicates that they are not permitted to be disposed of with household waste, rather they must be collected separately.
With batteries that contain harmful substances, you will also find the chemical symbol of the harmful substance under the crossed-out bin symbol. These symbols mean the following:
– Pb: Battery contains lead
– Cd: Battery contains cadmium
– Hg: Battery contains mercury
You are legally obligated to return disposable and rechargeable batteries. Old batteries may contain harmful substances that can be harmful to your health or the environment when stored or disposed of improperly. Batteries also contain important raw materials, such as iron, zinc, manganese or nickel.
You can return old batteries to us or at collection points in your immediate vicinity (for example, at shops or municipal collection points) Please note that you should only dispose of batteries in collection containers for old batteries when they are fully discharged. If the batteries are not completely dead, you need to take precautionary measures before disposal to prevent short circuits. Incorrect disposal of batteries/rechargeable batteries can harm the environment.
| Make sure that the packaging is disposed of in an environmentally friendly manner. Cardboard packaging can be put out for waste-paper collection or taken to public collection points for recycling. The plastic packaging used for your device will be collected by your local waste management company and disposed of in an environmentally friendly manner.

ES/PT

Relevant for France only:

‘Sorting made easier’
This product, including all accessories, its printed material and packaging components, can be recycled. They are subject to an extended producer responsibility and are sorted and collected separately.

| Please pay attention to the labels on packaging materials when you separate waste; these are marked with abbreviations (a) and numbers (b) that mean the following:
1-7: Plastics/20-22: Paper and cardboard/80-98: Composite materials.
Symbol| Material| This product contains the following packaging components
---|---|---
| Polyethylene terephthalate| Shrink film in which batteries are wrapped
| Corrugated cardboard| Sales packaging, cardboard insert
| Paper| Tissue paper to protect the product

12. Marks of conformity


This product meets the requirements specified in the applicable European and national policies. This product’s conformity has been verified. The declarations and documents are stored with the manufacturer.

This product fulfils the requirements specified in the applicable national policies for the Republic of Serbia.

You can download the full EU declaration of conformity at the following link: https://www.targa.gmbh/downloads/conformity/444878_2307.pdf

13. Notes on warranty and service


Warranty of TARGA GmbH

This device is sold with three years warranty from the date of purchase. Please keep the original receipt in a safe place as proof of purchase. Before using your product for the first time, please read the enclosed documentation. Should any problems arise which cannot be solved in this way, please call our hotline. Please have the article number and, if available, the serial number to hand for all enquiries. If it is not possible to solve the problem on the phone, our hotline support staff will initiate further servicing procedures depending on the fault. Within the warranty period the product will be repaired or replaced free of charge as we deem appropriate. No new warranty period commences if the product is repaired or replaced. Consumables such as batteries, rechargeable batteries and lamps are not covered by the warranty.
Your statutory rights towards the seller are not affected or restricted by this warranty.
You can find this and many more manuals, product videos and installation software available for download at www.lidl-service.com.
This QR code takes you directly to the LIDL service page (www.lidl- service.com). There, you can enter the item number (IAN) to access your operating manual.


PDF ONLINE
www.lidl-service.com

Service

(GB)
Phone:    0800 404 7657
E-Mail:   targa@lidl.co.uk

(IE)
Phone:    1800 101010
E-Mail:    targa@lidl.ie

(MT)
Phone:    800 62230
E-Mail:    targa@lidl.com.mt

(CY)
Phone:    8009 4241
E-Mail:    targa@lidl.com.cy

IAN: 444878_2307

  Manufacturer

TARGA GmbH
Coesterweg 45
59494 Soest
GERMANY

TARGA GmbH
Coesterweg 45
59494 Soest
GERMANY

Last Information Update
11/2023 – Ident.-No.: SLSN 3 D3 112023-1

IAN: 444878_2307

8

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals