bouncepad BP-COR-VA2-W Core Vesa Installation Guide
- September 12, 2024
- bouncepad
Table of Contents
BP-COR-VA2-W Core Vesa
“`html
Specifications:
-
Model: Core VESA
-
Sheet Code: BP-IM-085_REV0
-
Release Date: 14/08/2024
-
Maximum Mounting Surface Thickness: 25mm (Metric) / 1 inch
(Imperial) -
VESA Mount Compatibility: 50x50mm, 75x75mm, and 100x100mm
Product Usage Instructions:
Assembly Instructions:
Tools Required:
- Pencil
- Electric Drill
- 2.5mm Drillbit Socket Driver
In the Box:
The package includes various components such as screws, washers,
cable clamp, and tools like Torx driver bit and Allen key.
Fixings List:
Additional fixings may be included in the kit due to the modular
nature of the product range.
Product Assembly:
-
Clean the back of the tablet with the provided wipe and let it
dry completely before attaching the Mounting Plate. -
Attach the Mounting Plate level and centrally to the Tablet
back using Pan Head Screws. -
Secure the Flat Cable to the Tablet with the U-Bend Head and
Cable Clamp. -
Remove the VESA Fixing Covers with a Paper Clip if fixing to a
surface. -
Attach the Shell to the Wallmount or VESA mount ensuring proper
orientation. -
Secure the Tablet to the Shell and attach the Shell Fixing
Covers. -
Attach the VESA Fixing Covers to the VESA mount.
-
Connect the tablet to power to complete the installation.
Note:
Tighten screws using hand tools only to avoid damaging your
Bouncepad.
FAQ:
Q: Are third-party VESA mount fixings provided?
A: No, Bouncepad VESA to third-party VESA mount fixings are not
provided. Refer to specifications from the third-party VESA mount
for recommended fixings.
Q: What tablet orientations are supported?
A: The Bouncepad VESA mount supports both portrait and landscape
tablet orientations.
“`
Core VESA
Assembly Instructions
Tools Required:
Pencil Electric Drill 2.5mm Drillbit Socket Driver
*if fixing to a surface
Flat Cable
Fixings Kit
VESA Mount
Tablet Mounting Plate
Sheet Code: BP-IM-085_REV0
Release Date: 14/08/2024
Copyright 2024 Spotspot Ltd. (T/A Bouncepad) all rights reserved.
Confidential, no part of this publication may be reproduced or transmitted in
any form without the written permission of the copyright holder.
Shell
In the Box
4x M4x16mm Buttonhead
screw
4x M4 Split Washer
1x Case Washer
1x T20 Pin Torx Driver Bit
4x No.8 Buttonhead Self tapping
Screw
1x Cable Clamp
2x 3mm x 6mm Pan Head Screws
4x M3x10mm Countersunk
Screw
1x T10 Pin Torx Allen Key
Maximum Mounting surface thickness :
Metric Imperial
25 1x Cleaningmm 1″
Wipe
Fixings List
- Due to the modular nature of our product range you may receive additional fixings in the fixings kit
*Before attaching the Mounting Plate, fully clean the back of the tablet with the provided wipe and allow it to fully dry.
FoLraonpdtismcaalpaedhteasbiolne,tporerisesnfitramtliyoannd leave for 72hrs in
a 20°C environment before use. Do not reposition. Do not use prior to the
72hrs.
Portrait tablet orientation
Tighten screw(s) using hand tools, using electric tools may damage your Bouncepad.
Landscape
Portrait
Remove the Mounting Plate adhesive
1 backing. Attach level & centrally to the Tablet back as shown.
2x 3mmx6mm Pan Head Screws
Cable Clamp
Paper Clip
T10 Pin Torx Allen Key
Attach the Flat Cable
2 to the Tablet with the U-Bend Head.
Secure the Flat Cable to
3 the Mounting Plate with the Cable Clamp as shown.
Remove the
4 VESA Fixing Covers with a Paper Clip.
T20 Pin Torx Driver Bit M4 Split Washer
A Follow steps A if “Fixing to a surface”.
Drill central 16mm hole if running cable through surface.
Case Washer
M4x16mm Buttonhead screw
Locate & attach the Shell
5 to the Wallmount in the correct orientation.
B Follow steps B if “Fixing to a VESA Mount”.
Position & mark were the
A1 VESA is to be located. Ensure the VESA is level.
A2 Drill the fixing holes into your surface.
Remove the Shell Fixing Covers. Feed the Flat
A3 Cable into the assembly & locate the Tablet in the chosen orientation.
A4 Attach the VESA to the surface with your chosen cable management.
- Bouncepad VESA to third party VESA mount fixings not provided. Image shown for illustrative purposes & may bare zero resemblance to fixings specified for your VESA mount. Refer to specifications provided by the third party VESA mount for the recommended fixings.
*Bouncepad VESA mount is compatible with 50x50mm, 75x75mm and 100x100mm VESA mounting configurations.
A5 Go to step 6.
Remove the Shell Fixing Covers. Feed the Flat
B1 Cable into the assembly & locate the Tablet in the chosen orientation.
B2 B3 Secure the Bouncepad VESA mount to VESA mounting bracket
Go to Step 6.
6 Secure the Tablet to the Shell & attach the Shell Fixing Covers as shown.
7 Attach the VESA Fixing Covers to the VESA.
Connect tablet to power
8 & installation is now complete.