BRAVEN B07WDQ9D4X Flye Sport Burst Wireless Earbuds User Manual

BRAVEN B07WDQ9D4X Flye Sport Burst Wireless Earbuds

REGISTER YOUR BRAVEN EARBUDS
Your FLYE SPORT BURST earbuds have a 2-year limited warranty in case the unimaginable happens. Visit www.zagg.com/BRAVEN and scroll down to the bottom, looking for “How to Register Your Product”, and follow the instructions there.

IN THE BOX

• Earbuds,
• Fit kit (31 ear tips, 31 wings),
• micro-use charging cable,
• accessory pouch,
• sticker

BLUETOOTH PAIRING

1. Hold the multi-function button for 2 seconds to power on your FLYE SPORT BURST earbuds.
2. Your earbuds will automatically enter Bluetooth(I) Pairing mode, and the LED light on the earbuds will be flashing RED/WHITE, indicating they are in pairing mode.
3. Go to your device’s Bluetooth settings and select BRAVEN FLYE SPORT BURST from the list.
4. To pair to a second device, put your FLYE SPORT BURST earbuds in manual pairing mode. Power your earbuds off. While powered off, hold the multi-function button down for 4 seconds. Your BRAVEN earbuds will power on and enter pairing mode.

Your earbuds will remember the last 8 devices it has paired with and connect automatically when powered on.

BURST CHARGE
Go from fully drained FLYE SPOAT BUAST earbuds to 1 hour of playtime with a 5-minute charge.
MULTIPOINT
To connect your FLYE SPOAT BUAST to 2 devices simultaneously, follow these steps:

1. Pair your BAAVEN earbuds to your first device.

2. Power off your FLYE SPOAT BUAST earbuds and enter manual pairing mode.
   NOTE : if you’re unsure of haw ta complete this step see “BLUETOOTH PAIRING section.

3. Using manual pairing mode, pair FLYE SPOAT BUAST earbuds to your second device.

4. Power your BAAVEN earbuds back on, and they will automatically pair to your 2 devices.
   NOTE : every time you power an the earbuds, they will automatically reconnect ta bath devices.

5. To switch the device you are currently listening to, simply pause your device and press play on your other device.

AUTOMATIC POWER OFF
After 20 minutes of inactivity, your FLYE SPOAT BUAST earbuds will automatically power off.
VOICE ASSISTANT
To activate your phone’s voice assistant. double-press the multi-function button one your FLYE SPOAT BUAST earbuds.
INSTALLING EAR TIPS
Your FLYE SPORT BUAST earbuds come with the medium size ear tips preinstalled. To install a different size, follow these steps:

1. To remove the current tip, firmly pull straight outward from the plastic housing.
2. To install a new tip, push the ear tip straight on to the earbud driver.
3. The tip should line up with the earbud driver and fit securely.

INSTALLING EAR WINGS
Your FLYE SPORT BUAST earbuds come with the medium size ear wings preinstalled. To install a different size, follow these steps:

1. Remove the ear tip.
2. Insert the earbud driver through the small round hole in the ear wing.
3. Push the ear wing all the way down and around the plastic body of the earbud until the wing is snug and conforms to the plastic in all areas.
4. The wing should be sticking upward and angled slightly forward so it can lock into the curves of your ear directly above the opening of your ear canal.
5. Ensure the small slot-shaped hole in the back of the wing is aligned to the vent hole in the plastic body so the vent hold is exposed.

NOTE : if the vent hole is covered, it will affect acoustics and performance. the wings are interchangeable, either can be used for left or right.

CHARGING YOUR BRAVEN EARBUDS
Before using your FLYE SPORT BURST earbuds for the first time, fully charge them by plugging the micro-use cable into the earbuds. Then, plug the other end of the micro-use cable into any use port.
SPEAKEAPHONE
If you get a call while paired to your BRAVEN earbuds, you’ll hear the ringtone come through the earbuds. Simply quick press the multi-function button to answer the incoming call and to end it. If you wish to reject an incoming call, hold the multi-function button for 2 seconds.
WATERPROOF FEATURES
The FLYE SPORT BURST earbuds are IPX5 waterproof certified-designed to withstand heavy rainfall and splashing for up to 30 minutes.

RESETTING YOUR BAAVEN EAABUDS
To reset your FLYE SPORT BURST earbuds to factory settings, follow these steps:

1. Turn your FLYE SPORT BURST earbuds on.

2. Press and hold both the multi-function and volume up buttons at the same time for 4 seconds.

3. The earbuds will blink RED/WHITE indicating a successful reset and are now ready to pair again.
   NOTE : you may need to remove the BRAVEN FLYE SPORT BURST from your pairing list on the device you are pairing to successfully re-pair them.

4. The earbuds are now reset.

STILL HAVING TROUBLE? WE’RE HERE FOR YOU!

Visit www.zagg.com/braven and scroll down to the Support section for FAQ’s and to contact customer service.

Warnings. Caution, & Legal Information

To reduce the risk of fire or electric shock, do not expose the BRAVEN to rain or moisture while charging. The BRAVEN should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be pieced on or nee r it while being charged or charging other devices. As with any electronic products, use care not to spill liquids into any part of the product. Liquids can cause a failure and/or a fire hazard. The power supply must be used indoors only. Maka no modifications to the product or accessories. Unauthorized alterations may compromise safety, regulatory compliance, and system performance, and will void the warranty. Do not place any flame sources, such as lighted candles, on or near the

BRAVEN.
The BRAVEN contains small parts that may be a choking hazard and is not suitable for children under age 3. Do not continue charging the battery if it does not reach full charge within the specified charging time. Overcharging may cause the battery to become hot, rupture, or ignite. If you see any heat deformation or leakage, properly dispose ° of the battery. Do not attempt to charge the battery in temperatures outside the range of 32 -104 F [0 -40 C]. If the battery begins to leak, do not allow the liquid to come in contact with your skin or ayes. If contact has bean made, wash the affected area with plenty of water and seek medical attention immediately. Do not expose the product or battery to excessive heat, including direct sunlight or fire and storage or use inside cars in hot weather, where it can ba exposed to temperatures in excess of 115 F (60″CI. Doing so may cause the battery and power supply to generate heat, rupture, or ignite. Using the product in this manner also may result in a loss of performance and a shortened life expectancy. Extended exposure to direct sunlight may damage the external appearance and material qualities. Do not step on, throw, or drop batteries or the power supply or device, or expose them to a strong shock. Do not pierce, crush, dent, or deform the batteries or power supply in any way. If either becomes deformed, properly dispose of it.

Do not short-circuit batteries. Do not attempt to service the BRAVEN yourself. Opening or removing covers may expose you to dangerous voltages or other hazards and will void the manufactur­er’s warranty. To prevent risk of fi ra or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles. Your Bluetooth device (mobile phone, music player, tablet, laptop, etc. I must support the A2DP Bluetooth profile in order to work wirelessly with your new BRAVEN speaker. Tha A2DP profile is supported by most recent mobile products with built-in Bluetooth capability. Please refer to your device’s user manual for details and instruction regarding the Bluetooth profiles it supports. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1 J This device may not ca use harmful interference, and (2] this device must accept any interference received, including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accord a nee with the instructions, may ca use harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can date remined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver .
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

CAUTION : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC RADIATION EXPOSURE STATEMENT:
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restriction.· “This device complies with Industry Canada license- exempt RSS standard(sl. Operation is subject to the following two conditions: (11 this device may not cause interference, and [21 this device must accept any interference, including interference that may cause undesired operation of the device.

Under Industry

Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.l is not more than that necessary for successful communication. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This Class B digital apparatus complies with Canadian ICES-003. Lithium Battery installed is not intended to be replaced by the USER.

CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Where the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

Correct Disposal of this product. This marking indicates that this product should not A be disposed with other household wastes throughout the EU. To prevent possible – harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use tha return and collection systems or contact the retailer where the product was purchased. t.:;:-; This product complies with California Energy Commission efficiency standards for O consumer battery chargers.

Operating Frequency Band: 2402 MHz to 2480 MHz Maximum RF power: 6dBm EIRP
( Bravan Directive hereby 2014153/EU. declares The that full this text of device the is EU in DoC is compliance available with at the Radio following: Equipment https:/lwww.braven.com/eu-declaration-of- conformity.
Braven follows Safety Instruction for CE-LV. Do not operate products in temperatures outside the range of -5 – 40 C. Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table- cloths, curtains etc.
WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
WARNING : The power adapter is used as disconnect device, the disconnect device shall remain readily operable.
WARNING : Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. The battery (battery or batteries of battery pack] shall not be exposed to excessive heat such as sunshine, fire or the like.
Article 10
2. Manufacturers shall ensure that radio equipment shall be so constructed that it can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum.
10. In cases of restrictions on putting into service or of requirements for authorization of use, information available on the packaging shall allow the identification of the Member States or tha geographical area within a Member State where restrictions on putting into service or requirements for authorization of use exist The Commission may adopt implementing acts specifying how to present that information. Those implementing acts shall be adopted in accordance with the advisory procedure referred to in Article 45.

©2020 ZAGG Inc I All rights reserved I NASDAO: ZAGG I Designed by ZAGG in Utah. MADE IN CHINA I ZAGG USA I 910 W. Legacy Center Way, Suite 500, Midvale, UT 84047 © ZAGG Inc I *1PX7: Water standard protects from submersion in water et a depth of one meter, for 30 minutes. I BRAVEN and Flye Sport are trademarks of ZAGG.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>