TooQ TQE-2202BR Storage Drive Enclosure SSD Enclosure Brown M.2 User Manual
- June 13, 2024
- TooQ
Table of Contents
TooQ TQE-2202BR Storage Drive Enclosure SSD Enclosure Brown M.2
IMPORTANT INSTRUCTIONS
The M.2 SATA (NGFF) external SSD enclosure is Plug & Play and allows you to connect your disk via USB 3.0 / 3.1 Gen 1 port to any device.
For your safety and proper use of this product, please read this instruction manual carefully before starting the installation
Package content
- 1 x External case.
- 1 x USB-C to USB-A connection cable.
- 1 x USB-C to USB-C connection cable.
- 1 x Mounting bracket.
- 1 x User manual.
Features of the external case
- USB Interface 3.0 / 3.1 Gen 1 – Up to 5 Gbps.
- Supports M.2 SATA (NGFF) SSDs with M-Key, M+B Key 2230/2242/2260/2280 and up to 1 TB capacity.
- Not compatible with M.2 NVMe PCIe SSD disks.
- Supports UASP protocol.
- Plug & Play, no need to install drivers.
- LED indicates power and data access.
- Aluminium enclosure.
- Power supply through the USB connection
System Requirements
- Have a USB port on the device you want to connect.
- Compatible with Windows, Mac and Linux.
Hardware installation
-
Press both sides of the external case with your fingers and remove the plate in the direction of the arrow.
-
Insert the M.2 SSD hard drive into the PCB connector and then insert the mounting bracket at the opposite end.
-
Gently press down on the mounting bracket until it clicks.
-
Insert the plate, with the SSD, and slide it inside until the external case is completely closed.
-
Connect the cable via the USB-A the device and the USB-C to the external enclosure. The transfer speed will be adapted to the version of the USB port that the device has.
*Example of connection with the USB-C cable to USB-A.
Supported hard drive sizes
-
SSD M.2 SATA (NGFF) key 2280
-
SSD M.2 SATA (NGFF) key 2260.
-
SSD M.2 SATA (NGFF) key 2242
-
SSD M.2 SATA (NGFF) key 2230.
In case of hard disk failure:
- Check that the disk partition and file format partition have been performed.
- Check that the hard disk is in optimum condition. If this is not the case, contact the manufacturer or distributor.
Disk partition and file format
If the disk is new, it will not be recognized by the system until you create
partitions and format it. This operation can be performed in systems based on:
Windows: Equipment (Right button) → Manage → Storage → Disk
administrator.
Mac : Finder → Go → Utilities → Disk Utility.
Linux: System → System Administration → Disk Utility
Warranty Information
TooQ provides a warranty in accordance with the current regulations starting from the moment of purchase, therefore it is necessary to have the receipt or invoice with the date. The distributor or dealer from whom you purchased this product will handle your claim and provide technical service while the warranty is in effect. The storage enclosure should show the serial number without having been altered or erased, if it is not intelligible, the warranty will not be applied.
Out of Warranty
The warranty does not cover the effects and damage caused to the storage enclosure due to:
- Do not follow the user manual.
- Modifications or alterations of any kind.
- High and low temperatures, humidity and contact with liquids.
- Wear and scratches caused to everyday use. The warranty does not cover damage or defects to the hard drive caused by improper use of the hard drive or the storage enclosure
FAQ
Can be found frequently asked questions on our website
www.tooq.com under the product link.
Products may suffer variations due to stock change, product improvement or
printing error. If you have any doubt, please contact us
- AII specifications are subject to change without notice.
- Products may not be available in all markets.
- Product color and bundled software versions are subject to change without notice.
- Brand and product names mentioned are trademarks of their respective companies. ©2023 by TooQ Technology, S.L.
Released in 2023/08
AII Rights Reserved.
tooq.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>