bouncepad BP-LINKIPAD10B Adjustable Tablet Kiosk Ergonomically Flex Instruction Manual
- October 30, 2023
- bouncepad
Table of Contents
bouncepad BP-LINKIPAD10B Adjustable Tablet Kiosk Ergonomically Flex
Tools Required to Fix From Above:
- Drill + drill bits
- Pencil
- 16mm Hole Saw
In the Box
Fixings List
- Due to the modular nature of our product range you may receive additional fixings in the fixings kit
Assembly Instructions
-
Remove Front and Back Screw Covers.
-
Remove Faceplate.
-
Remove Cable Lock.
-
Select your PoE device and note it’s location in relation to the mounting slots.
-
Insert the tie through the cable slots and then clasp over the POE device.
-
Specifically for Texas PoE GAT-USBPD use velcro pad for attachment.
-
Feed the ethernet cable through the cable exit.
-
Connect the ethernet cable to the POE and secure the cable with the cable lock.
A1: Use a pencil to mark pilot hole locations.
A2: Use a drill bit suitable for your surface and make 4x pilot holes.
A3: If running a ethernet or USB cable through the surface use a hole saw in the cable exit position.
A4: Secure the Link to the surface with 4x No.8 Self tapping screws. Rawl plugs are provided if required.
-
Connect the USB cable to the tablet, then place inside the enclosure. Reattach the faceplate.
-
Use 6x M3 Screws to secure faceplate.
-
Reattach the front and back screw covers.
-
Set up the video-conferencing software and peripherals as per the provider’s instructions.
-
For additional security, tether your Link with a Kensington security cable. *Security cable not provided.
