FiiO M11 Plus Android Music Player User Guide
- June 6, 2024
- Fiio
Table of Contents
Quick Start Guide
: M11 Plus
Due to continuous improvement, every specification and design is subject to change at any time without further notice.
Portable high resolution music player
Buttons and Ports Labeled (Pictures are for reference only)
(1) Power/Lockscreen
(2) Volume up
(3) Volume touch panel
(4) Volume down
(5) Multifunction button
(6) Previous track
(7) Play/Pause
(8) Next track
(9) HOLD switch
(10) TF card slot
(11) 4.4mm balanced out/line-out
(12) 2.5mm balanced out
(13) Type C transfer/charging port
(14) 3.5mm headphone out/line-out/coaxial out
Power on/off
Hold the Power button to turn on the M11 Plus. Click the preferred language
onscreen to enter the main UI. Hold the Power button while the M11 Plus is on,
and then a shutdown dialogue will pop up, and you can select to power off or
reboot the M11 Plus.
Charging
The M11 Plus supports quick charge. It takes about 3.5 hours to complete a
full charge. To achieve an ideal charging, it is recommended to use a QC3.0 or
above quick charger.
Gestures
Return to previous page: swipe right from the left edge of the screen, or
swipe left from the right edge.
Return to homepage: swipe up from the bottom edge of the screen.
Multi-task management: swipe up from the bottom edge of the screen and then
hold.
HOLD switch
When the HOLD switch is turned on, the side buttons of the M11 Plus will be
locked to avoid any unintended operation. You can re-enable the side buttons
by turning off the HOLD switch.
Volume touch panel
Swipe up and down on the touch panel to adjust volume: swipe up to increase
volume while swiping down to decrease.
Working as a USB DAC when connected to a computer
Please download the USB DAC driver on our website and follow relevant
instructions to install the driver. (driver-free for MAC)
Download link: http://www.fiio.com/Driver_Download
MTP function
Before using a Mac computer for data transmission, the MTP driver is required.
Please download the MTP driver on our website and follow relevant instructions
to install it. (driver-free for Windows systems)
Download link: http://www.fiio.com/Driver_Download
Firmware upgrade
-
Over-the-air (OTA) automatic upgrade
Turn on the M11 Plus’s WiFi, connecting it to a valid internet. The M11 Plus will detect new firmware automatically. If no new firmware can be detected, please go to the menu of “Technical support -> Firmware Upgrade -> Online Upgrade” to check and upgrade the firmware manually. -
Manual upgrade via a zip file
Download the zip file of the upgrade firmware on our website and follow relevant instructions to upgrade it.
Download link: http://www.fiio.com/supports
Notes and precautions
Please do not repair or disassemble the product on your own and keep it away
from water.
Please charge the battery on a regular basis to secure the battery life when
this product has not been used for a long time.
For your safety, please avoid using headphones in dangerous environments.
It is recommended to use a suitable charger in case of a high-voltage adaptor
causing damage to the M11 Plus.
In the likely event that the M11 Plus hangs up, you may hold the
Power/Lockscreen button for over 10 seconds to force a reboot.
Accessories
(please confirm if the following items are included)
- Tempered glass screen protector (applied on the M11 Plus in factory already)
- Leatherette case (put on the M11 Plus in factory already)
- USB3.0 cable
- Coaxial adaptor cable
- Warranty card
- Quick start guide
- Ejector pin
To learn more
To learn more about FiiO products, please go to http://www.fiio.com.
To learn more about operating your FiiO product, please go to
http://www.fiio.com/supports
WEEE Directive & Product Disposal
At the end of its serviceable life,
this product should not be handed as household or general waste It should be
handed over to the applicable collection point for the recycling of electrical
and electronic equipment, or returned to the supplier for disposal.
Internal/Supplied Batteries:
This symbol on the battery indicates that the battery is to be collected
separately. This battery is designed for separate collection at an appropriate
collection point.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United
States and other countries. aptX is a trademark of Qualcomm Technologies
International Ltd., registered in the United States and other countries.
FCC STATEMENT
-
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.
Guangzhou FiiO Electronics Technology Co.,Ltd
5190397