bouncepad BP-COR-FBR-B Core Floorstanding Plus Brother Printer Mount Instruction Manual

: September 13, 2024
: bouncepad

Table of Contents

BP-COR-FBR-B Core Floorstanding Plus Brother Printer Mount
Product Information
Specifications:
- Product Usage Instructions
Assembly Instructions

BP-COR-FBR-B Core Floorstanding Plus Brother Printer Mount

“`html

Product Information

Specifications:

Maximum Mounting surface thickness: 25mm
Designed for Brother QL-820WNB Printer (Printer not
provided)
Supports Anker PowerCore 10000mAh battery pack (Battery pack
not provided)

Product Usage Instructions

Assembly Instructions

Tools Required:

Socket Driver
10mm Spanner or adjustable spanner

Floorstanding Assembly:

Orientate, locate & secure the Floorstanding Pole to the
Floorstanding Base. Ensure all fixings are installed
correctly.
Place the Floorstanding Cover over the Floorstanding Pole.
Remove Neck-Ring using T20 driver bit and Socket Driver.
Feed the printer’s power cable through the Floorstanding
Pole.

Printer Mount Assembly:

Attach the printer to the Printer Mount using M3x10mm
Screws.
Feed power cable through Printer Mount and plug into
Printer.
Re-attach Neck-Ring.
Pull cable back to remove any slack near the Printer
Mount.

Tablet Mounting Instructions:

Locate & attach the Shell to the Floorstanding in the
correct orientation.
Clean the tablet with the provided wipe and allow it to
dry.
Attach the Mounting Plate to the Tablet back.
Attach the Flat Cable to the Tablet with the U-Bend Head.
Secure the Flat Cable to the Mounting Plate with the Cable
Clamp.
Feed the Flat Cable into the assembly & locate the Tablet
in the chosen orientation.
Secure the Tablet to the Shell & attach the Fixing
Covers.

Note: Tighten screws using hand tools; using
electric tools may damage your Bouncepad.

Frequently Asked Questions (FAQ)

Q: Can I use an alternative printer with the Brother Printer

Mount?

A: The product is specifically designed for use with Brother
QL-820WNB. Using a different printer may not be compatible.

Q: How do I clean the product?

A: Use a damp cloth to clean the product. Do not use harsh
chemicals or solvents that may damage the surface.

Q: Can I charge my tablet while it is mounted on the

Shell?

A: Yes, you can connect the tablet power cable to its mains
power source while it is mounted on the Shell.

“`

Core Floorstanding with Brother Printer Mount
Assembly Instructions
Tools Required:
Socket Driver 10mm Spanner *or adjustable spanner

Tablet Mounting Plate

Fixings Kit

Floorstanding Pole

Shell Floorstanding Base

Floorstanding Rubber Collar

Flat Cable

Sheet Code: BP-IM-094_REV0
Release Date: 16/08/2024
Copyright 2024 Spotspot Ltd. (T/A Bouncepad) all rights reserved. Confidential, no part of this publication may be reproduced or transmitted in any form without the written permission of the copyright holder.

Floorstanding Cover
In the Box (Floorstanding)

1x Case Washer

4x M4 Split Washer

2x 3mm x 6mm Pan Head Screws

1x T20 Pin Torx Driver Bit

4x M3x10mm Countersunk
Screw

4x M4x16mm Buttonhead
screw

4x M6 Split Washer

4x M6x25mm Countersunk
screw

1x Cable Clamp

1x T10 Pin Torx Allen Key
Maximum Mounting surface thickness :
1x CleaMneintrgic Imperial
Wip2e5mm 1″

4x M6 Locking Nut

1x PZ3 Pozi Driver Bit

Fixings List (Floorstanding)

Due to the modular nature of our product range you may receive additional fixings in the fixings kit

4x M3x10mm Buttonhead
screw

M6 Nylon Locking nut M6 Split Washer

Brother Printer Mount
In the Box
(Printer Mount)

1x T10 Pin Torx Allen Key

M6x25mm Countersunk
screw

Fixings List
(Printer Mount)

Tighten screw(s) using hand tools, using electric tools may damage your Bouncepad.
Orientate, locate & secure the Floorstanding Pole
1 to the Floorstanding Base as shown. Ensure that all fixings are installed correctly.

Locate the Floorstanding
2 Cover over the Floorstanding Pole.

T20 Pin Torx Driver Bit

T10 Pin Torx Allen Key

Remove Neck-Ring using
3 T20 driver bit and Socket Driver.

M3x10mm Buttonhead
screw

4 Feed the printer’s power cable through the Floorstanding Pole.

designed for Brother QL-820WNB Printer is not provided.
Attach the printer to
5 the Printer Mount using M3x10mm Screws.

6 Feed power cable through Printer Mount and plug into Printer

7 Re-attach Neck-Ring

Tighten screw(s) using hand tools, using electric tools may damage your Bouncepad.

8 Pull cable back to remove any slack near the Printer Mount
For optimal adhesion, press firmly and leave for 72hrs in a 20°C environment before use. Do not reposition. Do not use prior to the 72hrs.

T20 Pin Torx Driver Bit M4x16mm
Buttonhead screw M4 Split Washer
Case Washer

Landscape tablet orientation
Portrait tablet orientation
*Before attaching the Mounting Plate, fully clean the back of the tablet with the provided wipe and allow it to fully dry.

Portrait Landscape

9 Locate & attach the Shell to the Floorstanding in the correct orientation.

10 Remove the Mounting Plate adhesive backing. Attach level & centrally to the Tablet back as shown.

2x 3mmx6mm Pan Head Screws
Cable Clamp

T10 Pin Torx Allen Key

Attach the Flat Cable
11 to the Tablet with the U-Bend Head.

Secure the Flat Cable
12 to the Mounting Plate with the Cable Clamp as shown.

13 Remove the Fixing Covers. Feed the Flat Cable into the assembly & locate the Tablet in the chosen orientation.

Top Fixing Cover
T10 Pin Torx Allen Key

4x M3x10mm Countersunk
Screw
Bottom Fixing Cover

designed to support the Anker PowerCore 10000mAh.
battery pack is not provided.

14