bouncepad BP-COR-LO2-W Core Lounge Installation Guide
- September 13, 2024
- bouncepad
Table of Contents
BP-COR-LO2-W Core Lounge
“`html
Specifications:
- Product Name: Core Lounge
- Maximum Mounting Surface Thickness: 25mm (1 inch)
Product Usage Instructions:
Assembly Instructions
Tools Required:
- Socket Driver
In the Box:
- 1x T20 Pin Torx Driver Bit
- 4x M4x16mm Buttonhead screw
- 1x Cable Clamp
- 2x 3mm x 6mm Pan Head Screws
- 4x M3x10mm Countersunk Screw
- 1x Case Washer
- 4x M4 Split Washer
- 1x T10 Pin Torx Allen Key
- 1x Cleaning Wipe
Fixings List:
- Due to the modular nature of our product range you may receive
additional fixings in the fixings kit.
Product Usage Steps:
-
Before attaching the Mounting Plate, fully clean the back of
the tablet with the provided wipe and allow it to dry. -
Remove the Mounting Plate adhesive backing. Attach level &
centrally to the Tablet back. -
Attach the Reinforced Flat Cable to the Tablet with the U-Bend
Head. -
Secure the Reinforced Flat Cable to the Mounting Plate with the
Cable Clamp. -
Attach the Shell to the Lounge.
-
Feed the Reinforced Flat Cable through the Shell & Lounge
Cone. -
Secure the Reinforced Flat Cable to the Shell.
-
Locate the Tablet Mount onto the Shell.
-
Secure the Tablet to the Shell & attach the Fixing
Covers. -
Connect the Tablet cable to its power supply & turn on. It
is recommended to lock the reinforced cable to an immovable object
for security. -
Installation is now complete.
Frequently Asked Questions (FAQ):
Q: Can I use electric tools for tightening screws?
A: No, using electric tools may damage your Bouncepad. Tighten
screws using hand tools only.
Q: What is the recommended thickness of the mounting
surface?
A: The maximum recommended mounting surface thickness is 25mm (1
inch).
“`
Core Lounge
Assembly Instructions Tools Required:
Socket Driver
Sheet Code: BP-IM-091_REV0 Release Date: 22/08/2024 Copyright 2024 Spotspot
Ltd. (T/A Bouncepad) all rights reserved. Confidential, no part of this
publication may be reproduced or transmitted in any form without the written
permission of the copyright holder.
Tablet Mounting Plate
Fixings Kit
Shell
Reinforced Flat Cable
Lounge Mounting
Arm
In the Box
1x T20 Pin Torx Driver Bit
4x M4x16mm Buttonhead
screw
1x Cable Clamp
2x 3mm x 6mm Pan Head Screws
4x M3x10mm Countersunk
Screw
1x Case Washer
4x M4 Split Washer
1x T10 Pin Torx Allen Key
Maximum Mounting surface thickness :
Metric Imperial
25 1x Cleaningmm 1″
Wipe
Fixings List
- Due to the modular nature of our product range you may receive additional fixings in the fixings kit
Tighten screw(s) using hand tools, using electric tools may damage your Bouncepad.
*Before attaching the Mounting Plate, fully clean the back of the tablet with the provided wipe and allow it to fully dry.
FoLraonpdtismcaalpaedhtaesbiolent, porreisesnfitramtliyoannd leave for 72hrs
in a 20°C environment before use. Do not reposition. Do not use prior to the
72hrs.
Portrait tablet orientation
2x 3mmx6mm Pan Head Screws Cable Clamp
T10 Pin Torx Allen Key
Remove the Mounting Plate adhesive
1 backing. Attach level & centrally to the Tablet back as shown.
2 Attach the Reinforced Flat Cable to the Tablet with the U-Bend Head.
Top
Secure the Reinforced Flat Cable to
3 the Mounting Plate with the Cable Clamp as shown.
Ensure the Lounge Cone is orientated
4 correctly as shown, with the cable exit at the top.
Case Washer M4 Split Washer
M4x16mm Buttonhead screw T20 Pin Torx Driver Bit
5 Attach the Shell to the Lounge as shown.
Remove the Fixing Covers. Feed the
6 Reinforced Flat Cable through the Shell & Lounge Cone as shown.
Top Fixing Cover
T10 Pin Torx Allen Key
M4 Split Washer
Reinforced Flat Cable
M4x16mm Buttonhead screw
T20 Pin Torx Driver Bit
7 Secure the Reinforced Flat Cable to the Shell.
8 Locate the Tablet Mount onto the Shell.
*Illustrated securing solution shown for illustrative purposes only. Padlock
or power supply not provided.
4x M3x10mm Countersunk
Screw Bottom Fixing Cover
Secure the Tablet to the
9 Shell & attach the Fixing Covers as shown.
Connect the Tablet cable to its power supply &
9 turn on. We recommend locking the reinforced cable to an immovable object
for security.
10 Installation is now complete.