SAMEBIKE M20-III Electric Mountain Bicycle User Manual
- September 2, 2024
- SAMEBIKE
Table of Contents
SAMEBIKE M20-III Electric Mountain Bicycle
Important warning
- This manual include important safety performance information and service information. Please make sure you have read the following warning content before the first time you use our product.
- If you borrow your electric bicycle to other people, please let the user read this manual, it could help to decrease the risk of accident.
- Please wear a suitable and safe helmet before riding, please wear clothes with fluorescent and reflective stripes when you ride at night Don’t exceed speed limit, it is a main reason of traffic accident, we should abide by the traffic rule, we shouldn’t exceed the speed limit.
- Don’t touch the charging hole on the bike, or use metal touch it, otherwise, the accident will be caused by the transient short circuit of the current.
- Zero starting, braking frequent, driving against the wind, carrying people or anything, insufficient air pressure on the tires. All of these will use much electric energy, and then reduce the endurance mileage. If you want the best endurance mileage, please do something as follows:
- Please use assist mode;
- On the premise of safety, don’t brake frequently or use zero starting;
- Don’t overload;
- Before riding, please check the pressure of the tire and supply enough pressure.
- Our Ebike should avoid prolonged exposure to the sun or rain, avoid storage in places with high temperatures or corrosive gas, so as to avoid electroplating parts and paint surface by chemical corrosion and electrical parts damage, resulting in operational failure and accidents.
- Your current insurance business may not cover the situation you may encounter when riding an electric bike, please contact your insurance company or insurance broker for relevant consultation.
- If you use our E-bike in your country, pls refer to the local laws and regulation. For example in China, riding an electric bicycle must reach the age of 16.
- Bicycles are vehicles with certain risk fact factor, please be sure to abide by the traffic rules. At the same time, when emergency braking, brake the rear wheel first, then brake the front wheel, when cycling speed is too fast. There is a danger of tipping over if you brake the front wheel suddenly, please ride carefully.
Unpacking and product specs
Remove all package material, then inspect each item for any accident damage that may have occurred during shipping. You should find each of these items in your box:
Product Components
- Handlebar
- Display
- LED Front light
- Suspension Fork
- Disc brake
- Motor
- Tire
- Battery
- Pedal
- Crankset
- Chain
- MOTOR
- Flywheel
- Suspension Fork
- Saddle
- Battery
Method of assembly
Adjust handlebar and stem
Assemble the headlight
Assemble Front fender
Installing the front wheel
Front-wheel motor connection
Installing the pedal
Product instruction
Charging method
The method of removing the battery
LCD Display (functional instruction)
Functions
M20 meter offers a variety of features to meet your cycling needs,
including:
- Intelligent electric power display
- Gear display
- Motor power indicator
- Speed display (including real-time speed, maximum speed, average speed)
- Mileage display (including single mileage and total mileage)
- Assist pushing control and display
- Cruise indication
- Highlight Control and Display
- Error code display
- USB connection indicator
- Bluetooth connection indicator
- Multiple parameter settings (such as: wheel diameter, speed limit, battery power setting and assist parameter setting, etc.)
Power on/off
After long pressing the power on/off button , the meter starts to work and
turn on the working power of the controller. In the power-on state, long press
the power-on/off button to turn off the power. In the off state, the meter no
longer uses the battery power, and the leakage current of the meter is less
than 1UA. If the electric bike is not used for more than 10 minutes, the meter
will automatically shut down.
Assist pushing mode
Press and hold the button, and after 2 seconds, the electric bike will enter
the state of electric assist pushing mode. Electric bike travel at a speed of
less than 6 kilometers per hour. At the same time, the screen displays “ “.
Release the button, the electric bike will stop the power output immediately
and return to the state before assisting pushing mode.
( Cautions: Assist pushing mode can only be used when the user is pushing
the electric bike. Do not use it while riding.)
Headlight control
Short press button, make the controller turn on the headlights, dim the
instrument backlight, and the screen display , short press button again, to
make the controller turn off the headlights, and the instrument backlight to
return to brightness.
Power gear selection
Short press or button to switch the power gear of the electric bike and
change the output power of the motor. The default output power range of the
meter is 0-5, 0 is stop power output, 1 is the lowest power, 5 is the highest
power. When reaching the 5th gear, press the button again. After the power-
assisted downshift reaches the other gear, short press the button again, the
meter screen still displays 0, and 0 flashes to indicate that the current is
the lowest gear. Meter startup default gear is 1.
Display interface switching
After the instrument is powered on, the instrument will display real-time
speed (km/h) and total mileage (km) by default. Short press the key to switch
between the total mileage (km), single mileage (km), maximum speed (km/h) and
average speed (km/h).
Error code display
When the electric bike electronic control system fails, the meter will display
automatically. For a detailed definition of the error code, see attached Table
- ( Cautions: When the error code is displayed, please troubleshoot the fault in time. After the fault occurs, the electric bike will not run normally.)
Preparation before riding
- Before riding, please read the
carefully. Please check whether the parts in good condition to ensure the safety of your riding. - Please check the status of the vehicle. Please check the brake, wheel, handlebar, folding buckle, quick release part of the electric bike to make sure the electric bike has good status.
- Please check the electrical system To know whether the battery power is enough. If it is not enough, you need to charge it as soon aspossible.
- Please check whether the brake system works properly. If it doesn’t work properly, please stop using it, please contact the official customer service person.
Warranty Policy
- Users should operate by the product manual. In case of any performance fault caused by production quality, the company shall perform the obligations of the three guarantees in accordance with the provisions of relevant laws and regulations of the state.
- The company is still responsible for the after-sales service of the faults beyond three guarantees and the major components in the Three guaran-tees, but there will be a cost for repair.
- If the battery replacement over the warranty time, our company will supply the battery by the factory price. To ensure safety and not to pollute the environment the battery must be 1:1 recycled and return to the battery manufacturer.
AFTER-SALES PROBLEMS SCAN THE QR CODE
GUANGZHOU SAMEWAY ELECTRIC BICYCLE CO., LTD
Add: NO.1Factory, Xiling, Huashan town, HuaDu district. Guangzhou City,
Guangdong Province CHINA
Official website: www.gzsamebike.com
Please contact for after-sales questions
E-mail:sameway@gzsamebike.com
https://www.youtube.com/channel/UCDDjD4TNvZE1-JbObPkdONvQ