SAMEBIKE RS-A07 Urban Commuting Electric Bicycles User Manual
- September 2, 2024
- SAMEBIKE
Table of Contents
- SAMEBIKE RS-A07 Urban Commuting Electric Bicycles
- FAQs
- Important warning
- Unpacking and specs
- SPECIFICATIONS
- Product Components
- Method of assembly
- Display Instruction
- Functions
- Preparation before riding
- Warranty Policy
- CONTACT INFORMATION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SAMEBIKE RS-A07 Urban Commuting Electric Bicycles
FAQs
Q: What should I do if my electric bicycle is not charging?
A: Check the charging cable connection and power source. Ensure the battery is properly inserted and contact customer support if issues persist.
Q: How can I maximize the endurance mileage of my electric bicycle?
A: Avoid frequent braking, drive with the wind, maintain proper tire pressure, and follow recommended usage guidelines to optimize your electric bicycle’s endurance mileage.
Important warning
- This manual include important safety performance information and service information. Please make sure you have read the following warning content before the first time you use our product.
- If you borrow your electric bicycle to other people, please let the user read this manual, it could help to decrease the risk of accidents.
- Please wear a suitable and safe helmet before riding, please wear clothes with fluorescent and reflective stripes when you ride at night. Don’t exceed the speed limit, it is the main reason for traffic accidents, we should abide by the traffic rules, we shouldn’t exceed the speed limit.
- Don’t touch the charging hole on the bike, or use metal to touch it, otherwise, the accident will be caused by the transient short circuit of the current.
- Zero starting, braking frequently, driving against the wind, carrying people or anything, insufficient air pressure on the tires. All of these will use much electric energy, and then reduce the endurance mileage. If you want the best endurance mileage, please do something as follows :
- Please use assist mode;
- On the premise of safety, don’t brake frequently or use zero starting;
- Don’t overload;
- Before riding, please check the pressure of the tire and supply enough pressure.
- Our Ebike should avoid prolonged exposure to the sun or rain, avoid storage in places with high temperatures or corrosive gas, so as to avoid electroplating parts and paint surface by chemical corrosion and electrical parts damage, resulting in operational failure and accidents.
- Your current insurance business may not cover the situation you may encounter when riding an electric bike, please contact your insurance company or insurance broker for relevant consultation. a
- If you use our bike in your country, pls refer to the local laws and regulations. For example in China, riding an electric bicycle must reach the age of 16.
- Bicycles are vehicles with certain risk fact factors, please be sure to abide by the traffic rules. At the same time, when emergency braking, brake the rear wheel first, then brake the front wheel, when cycling speed is too fast. There is a danger of tipping over if you brake the front wheel suddenly, please ride carefully.
- When our bicycles leave the factory, a unified speed limit is set for the personal safety of users when riding. Certainly, you can also choose to remove the speed limit setting, but please pay attention to controlling the speed. If your riding speed exceeds our speed limit, you need to be responsible for your personal safety.
Unpacking and specs
Remove all packaging material, then inspect each item for any accidental damage that may have occurred during shipping.You should find each of these items in your box:
SPECIFICATIONS
ITEM | SPECIFICATIONS |
---|---|
Model | RS-A07 |
Product Dimensions | 1840x670x1070(mm) |
Package Dimensions | 1490x230x910 (mm) |
Max Load | 330 lbs (150kg) |
Package Weight | 77 lbs (35kg) |
E Bike Weight | 59 lbs (27kg) |
Max Speed | 21 Mph |
Battery/Charger | input 100-240V 50/60Hz AC Plug; Output 54.6V3A DC2.1 |
Pedal-Assist Mode | Approx 37-49miles (60-80 km) |
Pure Electric Mode | Approx 18-25miles (30-40 km) |
Max Angle of Climb | 20 degrees |
Charging Time | 6-8 hours |
Tire Pressure | According to the actual information on the tire |
Bell/Horn | Electric Horn Installed |
USB Charging Port | Output Voltage 5V1A |
Frame Material | 6061 Aluminum Alloy |
IP Level | IP54 |
Product Components
Overall View
- Handlebar
- Basket
- Headlight
- Suspension Fork
- Disc brake
- Tire
- Saddle
- Rear Rack
- Battery
- Motor
- Flywheel
- Chain
- Pedal EN
Method of assembly
Adjust the handlebar and stem
- Turn the stem clockwise to the front
- After adjusting the angle of the handle, tighten the screws in the direction to fix the handle
- Loosen the screws in the direction
- Loosen the four screws and remove the handle cover
- Handlebars center on stem assembly
- After adjusting the angle according to personal habit, lock the handlebar screws
Install the front and rear mudguards
- Take out the front fender
- Put the fender and screws in the direction
- Tighten the screws in the direction
- Unscrew the screw of the fender
- Put in the fender retaining rod, screw down the screws
Install the front wheel
- Take out the front wheel
- Put the tire into the fork
- Place the caliper in the disc brake
- Take out the quick-release clamp, pls pay attention to the direction of spring.
- Place the quick-release clamp into the front wheel clamp slot
- Install quick-release nuts on the opposite side of the caliper
- Tighten the quick disassembly in the direction
- Press the quick-release clamp firmly to ensure firm
Install the vegetable basket and front headlights
- Loosen the four screws in the direction and place them aside
- Place the cables together in the direction
- Align the shopping basket with the screw hole and insert thescrew
- Tighten the screws in the direction
- Unscrew the screws in the direction
- Place the front headlights and screws in the correct direction
- Tighten the screws in the direction
- Secure the wire with a tie
Installing the pedal
- Pay attention to the “L” and”R” marks on the pedal
- Don’t install pedals upside down, otherwise it will damage the thread
- Tighten the right pedal “R” clockwise
- Tighten the left pedal “L” counterclockwise
Method to remove battery
- Find the key (factory default on the handlebar cables)
- Turn the key to open the lock
- Take out the battery at the arrow
- Battery switch button
Charging Methods
- Method 1:Charge directly in the direction indicated by the arrow
- Method 2:Remove the battery and charge it directly
- Put the power supply connected to the socket,The indicator light indicates means successful charging.
- Short press the button above the battery to check the battery status
Display Instruction
LCD Display (functional instruction)
Functions
The meter offers a variety of features to meet your cycling needs, including:
- Intelligent electric power display
- Gear display
- Motor power indicator
- Speed display (including real-time speed, maximum speed, average speed)
- Mileage display (including single mileage and total mileage)
- Assist pushing control and display
- Cruise indication
- Headlight Control and Display
- Error code display
- USB connection indicator
- Bluetooth connection indicator
- Multiple parameter settings (such as: wheel diameter, speed limit, battery power setting and assist parameter setting, etc.)
- Error code display
When the electronic control system fails, the meter will display automatically. For the detailed definition of the error code, see attached Table 1. (Cautions: When the error code is displayed, please troubleshoot the fault in time. After the fault occurs, the electric bike will not run normally.)
Table of error code definitions
Error code | E001 | E002 | E003 | E004 | E005 | E006 |
---|---|---|---|---|---|---|
Definition | Controller failure | Communication failure | Motor Hall signal | |||
anomaly | Handlebar failure | Brake failure | Motor phase loss |
Power on/off
After long pressing the power on/off button , the meter starts to work and turns on the working power of the controller. In the power-on state, long press the power-on/off button to turn off the power. In the off state, the meter no longer uses the battery power, and the leakage current of the theater is less than 1uA. If the electric bike is not used for more than 10 minutes, the meter will automatically shut down.
Assist pushing mode
Press and hold the button, and after 2 seconds, the electric bike will enter the state of electric assist pushing mode. Electric bikes travel at a speed of less than 6 kilometers per hour. At the same time, the screen displays ” “. Release the button, the electric bike will stop the power output immediately and return to the state before assisting pushing mode. (Cautions: Assist pushing mode can only be used when the user is pushing the electric bike. Do not use it while riding.)
Headlight control
Short press the button, to make the controller turn on the headlights, and dim the instrument backlight, and the screen display , short press the button again, to make the controller turn off the headlights, and the instrument backlight to return to brightness.
Power gear selection
Short press or button to switch the power gear of the electric bike and change the outpower of the motor. The default output power range of the meter is 0-5, 0 is stop power output,1 is the lowest power, and 5 is the highest power. When reaching the 5th gear, press the button again, the meter screen will still display 5, and flash 5 to indicate that the current is the highest gear. After the power-assisted downshift reaches the 0th gear, short press the button again, the meter screen still displays 0, and 0 flashes to indicate that the current is the lowest gear. The meter startup default gear is 0.
Display interface switching
After the instrument is powered on, the instrument will display real-time speed (km/h) and total mileage (km) by default. Short press the key to switch between the total mileage (km), single mileage (km), maximum speed (km/h) and average speed (km/h)
Preparation before riding
- Before riding, please read the
carefully. Please check whether the parts are in good condition to ensure the safety of your riding. - Please check the status of the vehicle. Please check the brake, wheel, handlebar, folding buckle, quick release part of the electric bike to make sure the electric bike has good status.
- Please check the electrical system: To know whether the battery power is enough. If it is not enough, you need to charge it as soon aspossible.
- Please check whether the brake system works properly. If it doesn’t work properly, please stop using it, please contact the official customer service person.
Warranty Policy
- Users should operate in accordance with the product manual. In case of any performance fault caused by production quality, the company shall perform the obligations of the three guarantees in accordance with the provisions of relevant laws and regulations of the state.
- The company is still responsible for the after-sales service of the faults beyond three guarantees and the major components in the three guarantees, but there will be a cost for repair.
- lf the battery replacement over the warranty time, our company will supply the battery at factory price. To ensure safety and not to pollute the environment the battery must be 1:1 recycled and returned to the battery manufacturer.
CONTACT INFORMATION
- GUANGZHOU SAMEWAY ELECTRIC BICYCLE CO.LTD Address: NO.1 Factory, Xiling, Huashan town, Huadu district, Guangzhou City, Guangdong Province, CHINA
- GUANGZHOU SAMEWAY ELECTRIC BICYCLE CO., LTD
- Add: N0.1 Factory, Xiling, Huashan town, Huadu district, Guangzhou City, Guangdong Province, CHINA
- Official website: www.gzsamebike.com
- Please contact for after-sales questions
- E-mail: sameway@gzsamebike.com
- https://www.youtube.com/channel/UCDDjD4TNvZE1-Jb0bPkdONvQ
- AFTER SALES PROBLEMS SCAN THE QR CODE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>