TRIPP-LITE N062-048-KJ 48-Port 1U Rack-Mount Unshielded Blank Keystone/ Multimedia Patch Pane User Guide
- June 9, 2024
- Tripp Lite
Table of Contents
TRIPP-LITE N062-048-KJ 48-Port 1U Rack-Mount Unshielded Blank Keystone/
Multimedia Patch Pane
Installation
Insert/Remove Clear ID Window
- Insert the clear ID window into the holder.
- To remove, bend the clear ID window on both sides.
Insert Keystone Jack
Notes
- It is highly recommended that keystone jacks be installed after they have terminated.
- Install keystone jacks in the top row first.
- On the rear side of the patch panel, hook the terminated keystone jack over the bottom ledge of the blank cutout.
- Tilt the keystone jack into the port and press firmly on the keystone jack latch. Using a flathead screwdriver or your hands, secure the keystone jack by snapping it into the cutout.
Remove Keystone Jack
- Using a flathead screwdriver, press the keystone jack latch.
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
WARRANTY REGISTRATION
Register your product today and be automatically entered to win an ISOBAR® surge protector in our monthly drawing! tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support Copyright © 2022 Tripp Lite. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>