SAMEBIKE 20LVXD30-II Lithium Electric City Folding Bicycle User Manual

20LVXD30-II Lithium Electric City Folding Bicycle
User Manualhttp://www.gzsamebike,com

IMPORTANT WARNING

• This manual include important safety performance information and service information. Please make sure you have read the following warning content before the first time you use our product.

• If you borrow your electric bicycle to other people, please let the user read this manual, it could help to decrease the risk of accident.

• Please wear a suitable and safe helmet before riding, please wear the clothes with fluorescent and reflective stripes when you ride at night. Don’t exceed speed limit, it is a mam reason of traffic accident, we should abide by the traffic rule, we shouldn’t exceed the speed limit.

• Don’t touch the charging hole on the bike, or use metal touch it, otherwise,the accident will be caused by the transient short circuit of the current

• Zero starting, braking frequent, driving against the wind, carrying people or anything,  insufficient air pressure on the tires. All of these will use much electric energy, and then reduce the endurance mileage. If you want the best endurance mileage, please do something as follows·
  ①. Please use assist mode.
  ②. On the premise of safety, don’t brake frequently or use zero starting.
  ③. Don’t overload.
  ④. Before riding, please check the pressure of the tire, and supply enough pressure.

• Our Ebike should avoid prolonged exposure to the sun or rain , avoid storage in places with high temperature or corrosive gas, so as to avoid electroplating parts and paint surface by chemical corrosion and electrical parts damage, resulting in operational failure and accidents
  Your current insurance business may not cover the situation you may encounter when riding a electric bike, please contact your msurance company or insurance broker for relevant consultation

• According to the law in China, riding an electric bicycle or a three-wheeled Electric bike must reach the age of 16 If you use this product mother countries, please refer to the local laws and regulations

• Bicycles are vehicles with certain risk fact factor, please be sure to abide by the traffic rules At the same time, when emergency braking, brake the rear wheel first, then brake the front wheel, when cycling speed is too fast There is a danger of tipping over if you brake the front wheel suddenly, please ride carefully

PRODUCT COMPONENTS

UNPACKING AND PRODUCT SPECS

Remove all package material, then inspect each item for any accident damage that may have occurred during shippping.You should find each of these items in your box.

MUDGUARD AND HEADLIGHT INSTALLATION

EBIKE HANDLE INSTALLATION

FRONT WHEEL INSTALLATION

After installing the front wheel, be sure to lock the quick release handle to prevent the front wheel from falling down and causing dange

PEDAL INSTALLATION

FIGURE 1
Take out two pedals, corresponding to the direction of the ebike “L”is the left pedal an”is the night pedal
FIGURE2
Find the multi-function wrench
FIGURE3
Turn the right pea re elockwise
FIGURE4
Turn the left pedal L” counterclockwise

SEAT INSTALLATION

BATTERY INSTALLATION

Do not install the battery upside down, do not place the battery in a watery environment

METER DISPLAY AND SETTINGS

Displayable content speed display. power-assisted gear display, power display. fault prompt total mileage, single mileage, headlight display. single driving time display
All contents of the display screen (full display within 1 S after power- on)

Meaning of bike status code:

Steps to open the meter settings:
Single key long press: Mainly used for switching(mode/switch state) Compound key long press:
Used for parameter setting, because the operation is complicated, this can reduce misoperation(short press is not a composite key, because it is easy to trigger by mistake , It’s too difficult to operate.) Short press is used for quick/frequent operations

1. Long press the button to turn on and turn on the meter or turn off and tum off the meter
2. Long press the instrument key to start the body headlights
3. Long press the instrument button to start the 6KM/h mobility assistance mode, press the brake to brake the contact mode
4. Short press the instrument   key to increase or decrease gears, 0 gear is neutral gear, at this time, it is manpower mode, gear 1-5 is electric and auxiliary working gear, at this time, you can use pedal assist mode or pure electric mode

Note: Some meters an are the same, and are the same. Because of the company’s product upgrades, part of the display content of the product you get may be different from the manual, but it will not affect your normal use

CHARGING STEPS

CHARGING SAFETY PRECAUTIONS

1. When the battery is charged for the first time, the charging time needs to be sufficient for 5 hours, and the charger indicator turns from red light to green light to indicate that the battery is fully charged
2. Avoid exposure of electric bikes to high temperatures, and it is strictly forbidden to charge electric bikes in high temperature environments For safety, do not charge outdoors on rainy days
3. When the charging indicator turns from red to green, it means that the battery is fully charged, and the continuous charging time cannot exceed12 hours, otherwise the battery may be deformed and damaged
4. lf the ebike is not used for a long time, it is also necessary to ensure that it is recharged once a month, so as to protect the battery and prolong its service life

BICYCLE FOLDING DISPLAY

Before riding, please check whether the safety clamps of each part of the ebike are fastened to avoid safety accidents

1. Open the folding clamp of the front riser tube, fold down the riser tube, and adjust it to the position of the T handle and then lower the seat cushion to the lowest
2. Open the battery lock hook of the frame and fold the frame in the direction indicated by the arrow.
3. Fold the frame so that the front wheel is folded almost parallel to the rear wheel to complete the folding of the whole bike

EPAC EN 15194

GUANGZHOU SAMEWAY ELECTRIC BICYCLE CO., LTD
Address: NO.1 Factory, Xiling, HuaShan town,HuaDu dstrict. Guangzhou City, GuangDong Province CHINA
MADE IN CHINA

AFTER-SALES PROBLEMS SCAN THE QR CODE

https://www.youtube.com/channel/UCDDjD4TNvZE1Jb0bPkdONvQ
GUANGZHOU SAMEWAY ELECTRIC BICYCLE CO.,LTD
Add: NO.1Factory, Xling,HuaShan town, HuaDu dstrict. Guangzhou City, GuangDong Province CHINA
Official website: www.gzsamebike.com
Please contact for after-sales questions
E-mail: sameway@gzsamebike.com
****https://www.youtube.com/channel/UCDDjD4TNVZE1Jb0bPkdONvQ

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>