SAMEBIKE M20 Electric Mountain Bicycle User Manual
- September 2, 2024
- SAMEBIKE
Table of Contents
- SAMEBIKE M20 Electric Mountain Bicycle
- Product Information
- Product Usage Instructions
- Important warning
- Unpacking and product specs
- Product Components
- Method of assembly
- Product instruction
- Functions
- Preparation before riding
- Warranty Policy
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SAMEBIKE M20 Electric Mountain Bicycle
Product Information
The M20 is a versatile electric bike designed for urban commuting and recreational cycling. It features an assist mode for easier pedaling and a lightweight yet sturdy frame for a smooth ride.
Specifications:
- Model: M20
- Website: http://www.gzsamebike.com
Product Usage Instructions
Safety Guidelines:
Ensure to follow these important safety guidelines:
- Always use assist mode for efficient cycling.
- Avoid frequent braking or zero starting to maintain safety.
- Do not overload the bike beyond its recommended capacity.
- Prior to riding, check tire pressure and adjust as needed.
Riding Tips:
When riding the M20, keep the following tips in mind:
- Obey traffic rules and regulations at all times for safe riding.
- In case of emergency braking, apply the rear brake first followed by the front brake to prevent accidents.
- Be cautious when cycling at high speeds to avoid tipping over by sudden front wheel braking.
Frequently Asked Questions (FAQ):
-
Q: What should I do before each ride?
A: Before each ride, make sure to check the tire pressure and adjust it if necessary. Additionally, ensure that all components are securely fastened and in proper working condition. -
Q: Can the M20 be used in rainy conditions?
A: While the M20 is designed to be weather-resistant, it is recommended to avoid heavy rain and wet conditions to prevent damage to the electrical components. If riding in light rain, take extra caution and dry the bike thoroughly afterwards.
Important warning
- This manual include important safety performance information and service information Please make sure you have read the following warning content before the first time you use our product
- If you borrow your electric bicycle to other people, please let the user read this manual, it could help to decrease the risk of accident
- Please wear a suitable and safe helmet before riding, please wear clothes with fluorescent and reflective stripes when you ride at night Don’t exceed speed limit, it is a main reason of traffic accident, we should abide by the traffic rule, we shouldn’t exceed the speed limit
- Don’t touch the charging hole on the bike, or use metal touch it, otherwise, the accident will be caused by the transient short circuit of the current
- Zero starting, braking frequent, driving against the wind, carrying people or anything, insufficient air pressure on the tires. All of these will use much electric energy, and then reduce the endurance mileage. If you want the best endurance mileage, please do something as follows:
- please use assist mode;
- on the premise of safety, don’t brake frequently or use zero starting;
- Don’t overload;
- Before riding, please check the pressure of the tire and supply enough pressure
- Our Ebike should avoid prolonged exposure to the sun or rain, avoid storage in places with high temperature or corrosive gas, so as to avoid electroplating parts and paint surface by chemical corrosion and electrical parts damage, resulting in operational failure and accidents
- Your current insurance business may not cover the situation you may encounter when riding an electric bike, please contact your insurance company or insurance broker for relevant consultation
- If you use our ebike in your country, pis refer to the local laws and regulation. For example in China, riding an electric bicycle must reach the age of 16
- Bicycles are vehicles with certain risk fact factor, please be sure to abide by the traffic rules At the same time, when emergency braking, brake the rear wheel first, then brake the front wheel, when cycling speed is too fast. There is a danger of tipping over if you brake the front wheel suddenly, please ride carefully
Unpacking and product specs
Remove all packaging material, then inspect each item for any accident damage that may have occurred during shippping. You should find each of these items in your box:
Product Components
- Handlebar
- Display
- LED Front light
- Suspension Fork
- Disc brake
- Tire
- Battery
- Pedal
- Crankset
- Chain
- Saddle
- Suspension Fork
- Motor
- Flywheel
- Basket
Method of assembly
Adjust the handlebar and stem
Assemble the headlight
Assemble Front fender
Installing the front wheel
Mounting pedal
Connect the power
The method of removing the battery
Product instruction
Charging method
LCD Display (functional instruction)
Functions
S1 meter offers a variety of features to meet your cycling needs, including:
- Intelligent electric power display
- Gear display
- Motor power indicator
- Speed display (including real-time speed, maximum speed, average speed)
- Mileage display (including single mileage and total mileage)
- Assist pushing control and display
- Cruise indication
- Highlight Control and Display
- Error code display
- USB connection indicator
- Bluetooth connection indicator
- Multiple parameter settings (such as: wheel diameter, speed limit, battery power setting and assist parameter setting, etc.)
Power on/off
After long pressing the power on/off button , the meter starts to work and
turn on the working power of the controller. In the power-on state, long press
the power-on/off button to turn off the power. In the off state, the meter no
longer uses the battery power, and the leakage current of the meter is less
than 1uA. If the electric bike is not used for more than 10 minutes, the meter
will automatically shut down.
Assist pushing mode
Press and hold the button, and after 2 seconds, the electric bike will enter
the state of electric assist pushing mode. Electric bike travel at a speed of
less than 6 kilometers per hour. At the same time, the screen displays “ “.
Release the button, the electric bike will stop the power output immediately
and return to the state before assist pushing mode.
(Cautions: Assist pushing mode can only be used when the user is pushing
the electric bike. Do not use it while riding.)
Headlight control
Short press button, make the controller turn on the headlights, dim the
instrument backlight, and the screen display , short press button again, to
make the controller turn off the headlights, and the instrument backlight to
return to brightness.
Power gear selection
Short press or button to switch the power gear of the electric bike and change
the output pier toe storer, idea guest ower. when ref then the st gear, press
pole output, again, the meter screen will still display 5, and flash 5 to
indicate that the current is the highest gee meter screen still dispites d,
and o flashes to indicate that the current is the lowest gear. in, Meter
startup default gear is 1.
Display interface switching
After the instrument is powered on, the instrument will display real-time
speed (km/h) and total mileage (km) by default. Short press the key to switch
between the total mileage (km), single mileage (km), maximum speed (km/h) and
average speed (km/h).
Error code display
When the electric bike electronic control system falls, the meter will display
automatically. For a detailed definition of the error code, see attached Table
- Cours the elective will ode is chorale, please troubleshoot the fault in time. After the fault occurs, the electric bike will not run normally.)
Preparation before riding
- Before riding, please read the
carefully. Please check whether the parts in good condition to ensure the safety of your riding. - Please check the status of the vehicle. Please check the brake, wheel, handlebar, folding buckle, quick release part of the electric bike to make sure the electric bike has good status.
- Please check the electrical system: To know whether the battery power is enough. If it is not enough, you need to charge it as soon aspossible.
- Please check whether the brake system works properly. If it doesn’t work properly, please stop using it, please contact the official customer service person.
Warranty Policy
- Users should operate in accordance with the product manual. In case of any performance fault caused by production quality, the company shall perform the obligations of the three guarantees in accordance with the provisions of relevant laws and regulations of the state.
- The company is still responsible for the after-sales service of the faults beyond three guarantees and the major components in the Three guaran-tees, but there will be a cost for repair.
- If the battery replacement over the warranty time, our company will supply the battery by factory price. To ensure safety and not to pollute the environment the battery must be 1:1 recycled and return to the battery manufacturer.
AFTER SALES PROBLEMS SCAN THE QR CODE:
GUANGZHOU SAMEWAY ELECTRIC BICYCLE CO., LTD
Add: No. 32, bi cun north road, Xinhua industrial zone, Yingbin avenue
west, Huadu district, Guangzhou Guangdong, China 510812
Official website: www.gzsamebike.com
Please contact for after-sales questions
E-mail:sameway@gzsamebike.com
https://www.youtube.com/channel/UCDDjD4TNvZE1-JbObPkdONvQ
GUANGZHOU SAMEWAY ELECTRIC BICYCLE CO., LTD
Address: No. 32, bi cun north road, Xinhua industrial zone, Yingbin avenue
west, Huadu district, Guangzhou Guangdong, China 510812
MADE IN CHINA